Users should get emails when the script dies because of a critical failure.
Critical
failures are defined as any errors that could terminate the script, via die().
In order to add email support, this patch converts all die() to dodie() except:
* when '-v' is used as an option to get the version of the script.
* in Sig-Int handeler because it's not a fatal error to cancel the script.
* the die() in dodie() itself actually kills the script.
Suggested-by: Dhaval Giani <dhaval.gi...@oracle.com>
Signed-off-by: Tim Tianyang Chen <tianyang.c...@oracle.com>
---
ktest.pl | 88 +++++++++++++++++++++++++++++++++-------------------------------
1 file changed, 45 insertions(+), 43 deletions(-)
diff --git a/ktest.pl b/ktest.pl
index 2e38647..763a83e 100755
--- a/ktest.pl
+++ b/ktest.pl
@@ -464,9 +464,11 @@ $config_help{"REBOOT_SCRIPT"} = << "EOF"
EOF
;
+sub dodie;
+
sub _logit {
if (defined($opt{"LOG_FILE"})) {
- open(OUT, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}";
+ open(OUT, ">> $opt{LOG_FILE}") or dodie "Can't write to $opt{LOG_FILE}";
print OUT @_;
close(OUT);
}
@@ -751,7 +753,7 @@ sub set_value {
if ($override) {
$extra = "In the same override section!\n";
}
- die "$name: $.: Option $lvalue defined more than once!\n$extra";
+ dodie "$name: $.: Option $lvalue defined more than once!\n$extra";
}
${$overrides}{$lvalue} = $prvalue;
}
@@ -863,7 +865,7 @@ sub process_expression {
if ($val =~ /(.*)(==|\!=|>=|<=|>|<|=~|\!~)(.*)/) {
my $ret = process_compare($1, $2, $3);
if ($ret < 0) {
- die "$name: $.: Unable to process comparison\n";
+ dodie "$name: $.: Unable to process comparison\n";
}
return $ret;
}
@@ -882,7 +884,7 @@ sub process_expression {
return 1;
}
- die ("$name: $.: Undefined content $val in if statement\n");
+ dodie ("$name: $.: Undefined content $val in if statement\n");
}
sub process_if {
@@ -899,7 +901,7 @@ sub __read_config {
my ($config, $current_test_num) = @_;
my $in;
- open($in, $config) || die "can't read file $config";
+ open($in, $config) || dodie "can't read file $config";
my $name = $config;
$name =~ s,.*/(.*),$1,;
@@ -936,7 +938,7 @@ sub __read_config {
if ($type eq "TEST_START") {
if ($num_tests_set) {
- die "$name: $.: Can not specify both NUM_TESTS and
TEST_START\n";
+ dodie "$name: $.: Can not specify both NUM_TESTS and
TEST_START\n";
}
$old_test_num = $test_num;
@@ -959,7 +961,7 @@ sub __read_config {
if ($rest =~ s/\sELSE\b//) {
if (!$if) {
- die "$name: $.: ELSE found with out matching IF
section\n$_";
+ dodie "$name: $.: ELSE found with out matching IF
section\n$_";
}
$if = 0;
@@ -997,7 +999,7 @@ sub __read_config {
}
if (!$skip && $rest !~ /^\s*$/) {
- die "$name: $.: Gargbage found after $type\n$_";
+ dodie "$name: $.: Gargbage found after $type\n$_";
}
if ($skip && $type eq "TEST_START") {
@@ -1007,7 +1009,7 @@ sub __read_config {
} elsif (/^\s*ELSE\b(.*)$/) {
if (!$if) {
- die "$name: $.: ELSE found with out matching IF section\n$_";
+ dodie "$name: $.: ELSE found with out matching IF section\n$_";
}
$rest = $1;
if ($if_set) {
@@ -1030,7 +1032,7 @@ sub __read_config {
}
if ($rest !~ /^\s*$/) {
- die "$name: $.: Gargbage found after DEFAULTS\n$_";
+ dodie "$name: $.: Gargbage found after DEFAULTS\n$_";
}
} elsif (/^\s*INCLUDE\s+(\S+)/) {
@@ -1038,7 +1040,7 @@ sub __read_config {
next if ($skip);
if (!$default) {
- die "$name: $.: INCLUDE can only be done in default
sections\n$_";
+ dodie "$name: $.: INCLUDE can only be done in default
sections\n$_";
}
my $file = process_variables($1);
@@ -1053,7 +1055,7 @@ sub __read_config {
}
if ( ! -r $file ) {
- die "$name: $.: Can't read file $file\n$_";
+ dodie "$name: $.: Can't read file $file\n$_";
}
if (__read_config($file, \$test_num)) {
@@ -1085,15 +1087,15 @@ sub __read_config {
($lvalue eq "NUM_TESTS" ||
$lvalue eq "LOG_FILE" ||
$lvalue eq "CLEAR_LOG")) {
- die "$name: $.: $lvalue must be set in DEFAULTS section\n";
+ dodie "$name: $.: $lvalue must be set in DEFAULTS section\n";
}
if ($lvalue eq "NUM_TESTS") {
if ($test_num) {
- die "$name: $.: Can not specify both NUM_TESTS and
TEST_START\n";
+ dodie "$name: $.: Can not specify both NUM_TESTS and
TEST_START\n";
}
if (!$default) {
- die "$name: $.: NUM_TESTS must be set in default section\n";
+ dodie "$name: $.: NUM_TESTS must be set in default
section\n";
}
$num_tests_set = 1;
}
@@ -1125,7 +1127,7 @@ sub __read_config {
set_variable($lvalue, $rvalue);
} else {
- die "$name: $.: Garbage found in config\n$_";
+ dodie "$name: $.: Garbage found in config\n$_";
}
}
@@ -1311,7 +1313,7 @@ sub eval_option {
# Check for recursive evaluations.
# 100 deep should be more than enough.
if ($r++ > 100) {
- die "Over 100 evaluations accurred with $option\n" .
+ dodie "Over 100 evaluations accurred with $option\n" .
"Check for recursive variables\n";
}
$prev = $option;
@@ -1442,7 +1444,7 @@ sub dodie {
run_command $post_test;
}
- die @_, "\n";
+ die "Aborted.\n";
}
sub create_pty {
@@ -1484,7 +1486,7 @@ sub exec_console {
close($pts);
exec $console or
- die "Can't open console $console";
+ dodie "Can't open console $console";
}
sub open_console {
@@ -1632,7 +1634,7 @@ sub save_logs {
if (!-d $dir) {
mkpath($dir) or
- die "can't create $dir";
+ dodie "can't create $dir";
}
my %files = (
@@ -1645,7 +1647,7 @@ sub save_logs {
while (my ($name, $source) = each(%files)) {
if (-f "$source") {
cp "$source", "$dir/$name" or
- die "failed to copy $source";
+ dodie "failed to copy $source";
}
}
@@ -1819,7 +1821,7 @@ sub get_grub2_index {
$ssh_grub =~ s,\$SSH_COMMAND,cat $grub_file,g;
open(IN, "$ssh_grub |")
- or die "unable to get $grub_file";
+ or dodie "unable to get $grub_file";
my $found = 0;
@@ -1834,7 +1836,7 @@ sub get_grub2_index {
}
close(IN);
- die "Could not find '$grub_menu' in $grub_file on $machine"
+ dodie "Could not find '$grub_menu' in $grub_file on $machine"
if (!$found);
doprint "$grub_number\n";
$last_grub_menu = $grub_menu;
@@ -1862,7 +1864,7 @@ sub get_grub_index {
$ssh_grub =~ s,\$SSH_COMMAND,cat /boot/grub/menu.lst,g;
open(IN, "$ssh_grub |")
- or die "unable to get menu.lst";
+ or dodie "unable to get menu.lst";
my $found = 0;
@@ -1877,7 +1879,7 @@ sub get_grub_index {
}
close(IN);
- die "Could not find '$grub_menu' in /boot/grub/menu on $machine"
+ dodie "Could not find '$grub_menu' in /boot/grub/menu on $machine"
if (!$found);
doprint "$grub_number\n";
$last_grub_menu = $grub_menu;
@@ -1990,7 +1992,7 @@ sub monitor {
my $full_line = "";
open(DMESG, "> $dmesg") or
- die "unable to write to $dmesg";
+ dodie "unable to write to $dmesg";
reboot_to;
@@ -2878,9 +2880,9 @@ sub bisect {
my $result;
- die "BISECT_GOOD[$i] not defined\n" if (!defined($bisect_good));
- die "BISECT_BAD[$i] not defined\n" if (!defined($bisect_bad));
- die "BISECT_TYPE[$i] not defined\n" if (!defined($bisect_type));
+ dodie "BISECT_GOOD[$i] not defined\n" if (!defined($bisect_good));
+ dodie "BISECT_BAD[$i] not defined\n" if (!defined($bisect_bad));
+ dodie "BISECT_TYPE[$i] not defined\n" if (!defined($bisect_type));
my $good = $bisect_good;
my $bad = $bisect_bad;
@@ -2966,7 +2968,7 @@ sub bisect {
# checkout where we started
run_command "git checkout $head" or
- die "Failed to checkout $head";
+ dodie "Failed to checkout $head";
}
run_command "git bisect start$start_files" or
@@ -3423,9 +3425,9 @@ sub patchcheck_reboot {
sub patchcheck {
my ($i) = @_;
- die "PATCHCHECK_START[$i] not defined\n"
+ dodie "PATCHCHECK_START[$i] not defined\n"
if (!defined($patchcheck_start));
- die "PATCHCHECK_TYPE[$i] not defined\n"
+ dodie "PATCHCHECK_TYPE[$i] not defined\n"
if (!defined($patchcheck_type));
my $start = $patchcheck_start;
@@ -3503,7 +3505,7 @@ sub patchcheck {
doprint "\nProcessing commit \"$item\"\n\n";
run_command "git checkout $sha1" or
- die "Failed to checkout $sha1";
+ dodie "Failed to checkout $sha1";
# only clean on the first and last patch
if ($item eq $list[0] ||
@@ -3594,7 +3596,7 @@ sub read_kconfig {
}
open(KIN, "$kconfig")
- or die "Can't open $kconfig";
+ or dodie "Can't open $kconfig";
while (<KIN>) {
chomp;
@@ -3755,7 +3757,7 @@ sub get_depends {
$dep =~ s/^[^$valid]*[$valid]+//;
} else {
- die "this should never happen";
+ dodie "this should never happen";
}
}
@@ -4016,7 +4018,7 @@ sub make_min_config {
# update new ignore configs
if (defined($ignore_config)) {
open (OUT, ">$temp_config")
- or die "Can't write to $temp_config";
+ or dodie "Can't write to $temp_config";
foreach my $config (keys %save_configs) {
print OUT "$save_configs{$config}\n";
}
@@ -4044,7 +4046,7 @@ sub make_min_config {
# Save off all the current mandatory configs
open (OUT, ">$temp_config")
- or die "Can't write to $temp_config";
+ or dodie "Can't write to $temp_config";
foreach my $config (keys %keep_configs) {
print OUT "$keep_configs{$config}\n";
}
@@ -4113,7 +4115,7 @@ if ($#ARGV == 0) {
if (! -f $ktest_config) {
$newconfig = 1;
get_test_case;
- open(OUT, ">$ktest_config") or die "Can not create $ktest_config";
+ open(OUT, ">$ktest_config") or dodie "Can not create $ktest_config";
print OUT << "EOF"
# Generated by ktest.pl
#
@@ -4148,7 +4150,7 @@ if (defined($opt{"LOG_FILE"})) {
my @new_configs = keys %entered_configs;
if ($#new_configs >= 0) {
print "\nAppending entered in configs to $ktest_config\n";
- open(OUT, ">>$ktest_config") or die "Can not append to $ktest_config";
+ open(OUT, ">>$ktest_config") or dodie "Can not append to $ktest_config";
foreach my $config (@new_configs) {
print OUT "$config = $entered_configs{$config}\n";
$opt{$config} = process_variables($entered_configs{$config});
@@ -4286,11 +4288,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
$outputdir = set_test_option("OUTPUT_DIR", $i);
$builddir = set_test_option("BUILD_DIR", $i);
- chdir $builddir || die "can't change directory to $builddir";
+ chdir $builddir || dodie "can't change directory to $builddir";
if (!-d $outputdir) {
mkpath($outputdir) or
- die "can't create $outputdir";
+ dodie "can't create $outputdir";
}
$make = "$makecmd O=$outputdir";
@@ -4321,7 +4323,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
if (!-d $tmpdir) {
mkpath($tmpdir) or
- die "can't create $tmpdir";
+ dodie "can't create $tmpdir";
}
$ENV{"SSH_USER"} = $ssh_user;
@@ -4394,7 +4396,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
if (defined($checkout)) {
run_command "git checkout $checkout" or
- die "failed to checkout $checkout";
+ dodie "failed to checkout $checkout";
}
$no_reboot = 0;
--
1.8.3.1
