Hi -----Original Message----- From: Yinbo Zhu Sent: Tuesday, November 14, 2017 4:00 PM To: 'Shawn Guo' <shawn...@kernel.org> Cc: 'Rob Herring' <robh...@kernel.org>; 'Mark Rutland' <mark.rutl...@arm.com>; 'Catalin Marinas )' <catalin.mari...@arm.com>; 'Will Deacon )' <will.dea...@arm.com>; Harninder Rai <harninder....@nxp.com>; 'Raghav Dogra' <raghav.do...@nxp.com>; Ashish Kumar <ashish.ku...@nxp.com>; Andy Tang <andy.t...@nxp.com>; 'open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS' <devicet...@vger.kernel.org>; 'linux-arm-ker...@lists.infradead.org' <linux-arm-ker...@lists.infradead.org>; 'open list' <linux-kernel@vger.kernel.org> Subject: RE: [PATCH v2] arm64: dts: ls1088a: Add USB support
-----Original Message----- From: Yinbo Zhu Sent: Tuesday, October 24, 2017 5:15 PM To: Shawn Guo <shawn...@kernel.org> Cc: Rob Herring <robh...@kernel.org>; Mark Rutland <mark.rutl...@arm.com>; Catalin Marinas ) <catalin.mari...@arm.com>; Will Deacon ) <will.dea...@arm.com>; Harninder Rai <harninder....@nxp.com>; Raghav Dogra <raghav.do...@nxp.com>; Ashish Kumar <ashish.ku...@nxp.com>; Andy Tang <andy.t...@nxp.com>; open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS <devicet...@vger.kernel.org>; linux-arm-ker...@lists.infradead.org; open list <linux-kernel@vger.kernel.org> Subject: RE: [PATCH v2] arm64: dts: ls1088a: Add USB support -----Original Message----- From: Shawn Guo [mailto:shawn...@kernel.org] Sent: Friday, September 22, 2017 2:55 PM To: Yinbo Zhu <yinbo....@nxp.com> Cc: Rob Herring <robh...@kernel.org>; Mark Rutland <mark.rutl...@arm.com>; Catalin Marinas ) <catalin.mari...@arm.com>; Will Deacon ) <will.dea...@arm.com>; Harninder Rai <harninder....@nxp.com>; Raghav Dogra <raghav.do...@nxp.com>; Ashish Kumar <ashish.ku...@nxp.com>; Andy Tang <andy.t...@nxp.com>; open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS <devicet...@vger.kernel.org>; linux-arm-ker...@lists.infradead.org; open list <linux-kernel@vger.kernel.org> Subject: Re: [PATCH v2] arm64: dts: ls1088a: Add USB support On Wed, Sep 13, 2017 at 05:10:09PM +0800, yinbo....@nxp.com wrote: > From: "yinbo.zhu" <yinbo....@nxp.com> > > Fix the issue that usb is not detected on ls1088ardb >It's not really about fixing issue but adding support. The patch had been tested on upstream 4.14 code, it can fix the issue. > > Signed-off-by: yinbo.zhu <yinbo....@nxp.com> > Signed-off-by: Ran Wang <ran.wan...@nxp.com> > --- >You should better have a version history here to tell what's changed between >version. >I will add a version history on next v3 patch Hi, I had modified the code as v4 version, https://patchwork.kernel.org/patch/10027393/ please check. Thanks, BRs > arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 8 ++++++++ > arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 20 ++++++++++++++++++++ > 2 files changed, 28 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > index 213abb72de93..6c3c3bc4b681 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts > @@ -118,6 +118,14 @@ > status = "okay"; > }; > > +&usb0 { > + status = "okay"; > +}; > + > +&usb1 { > + status = "okay"; > +}; > + > &esdhc { >Please sort these labeled nodes alphabetically. >Shawn > status = "okay"; > }; > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > index c144d06a6e33..c23fede8cf5d 100644 > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > @@ -359,6 +359,26 @@ > status = "disabled"; > }; > > + usb0: usb3@3100000 { > + compatible = "snps,dwc3"; > + reg = <0x0 0x3100000 0x0 0x10000>; > + interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; > + dr_mode = "host"; > + snps,quirk-frame-length-adjustment = <0x20>; > + snps,dis_rxdet_inp3_quirk; > + status = "disabled"; > + }; > + > + usb1: usb3@3110000 { > + compatible = "snps,dwc3"; > + reg = <0x0 0x3110000 0x0 0x10000>; > + interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; > + dr_mode = "host"; > + snps,quirk-frame-length-adjustment = <0x20>; > + snps,dis_rxdet_inp3_quirk; > + status = "disabled"; > + }; > + > sata: sata@3200000 { > compatible = "fsl,ls1088a-ahci"; > reg = <0x0 0x3200000 0x0 0x10000>, > -- > 2.14.1 >
