The Spreadtrum SC9860 platform will use the architected timers as local
clock events, but we also need a broadcast timer device to wakeup the
cpus when the cpus are in sleep mode.
Thus this patch registers the timer0 to be a broadcast timer supporting
periodic and oneshot events.
Signed-off-by: Baolin Wang <baolin.w...@spreadtrum.com>
---
drivers/clocksource/Kconfig | 8 ++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/sprd-timer.c | 213 ++++++++++++++++++++++++++++++++++++++
3 files changed, 222 insertions(+)
create mode 100644 drivers/clocksource/sprd-timer.c
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index cc60620..aa05132 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -467,6 +467,14 @@ config MTK_TIMER
help
Support for Mediatek timer driver.
+config SPRD_TIMER
+ bool "Spreadtrum timer driver"
+ depends on GENERIC_CLOCKEVENTS
+ depends on ARCH_SPRD || COMPILE_TEST
+ select TIMER_OF
+ help
+ Enables the support for the Spreadtrum timer driver.
+
config SYS_SUPPORTS_SH_MTU2
bool
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index dbc1ad1..c657d3d 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
obj-$(CONFIG_CLKSRC_NPS) += timer-nps.o
obj-$(CONFIG_OXNAS_RPS_TIMER) += timer-oxnas-rps.o
obj-$(CONFIG_OWL_TIMER) += owl-timer.o
+obj-$(CONFIG_SPRD_TIMER) += sprd-timer.o
obj-$(CONFIG_ARC_TIMERS) += arc_timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
diff --git a/drivers/clocksource/sprd-timer.c b/drivers/clocksource/sprd-timer.c
new file mode 100644
index 0000000..6fec0c5
--- /dev/null
+++ b/drivers/clocksource/sprd-timer.c
@@ -0,0 +1,213 @@
+/*
+ * Copyright (C) 2017 Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define TIMER_NAME "sprd_timer"
+
+#define TIMER_LOAD_LO 0x0
+#define TIMER_LOAD_HI 0x4
+#define TIMER_VALUE_LO 0x8
+#define TIMER_VALUE_HI 0xc
+
+#define TIMER_CTL 0x10
+#define TIMER_CTL_PERIOD_MODE BIT(0)
+#define TIMER_CTL_ENABLE BIT(1)
+#define TIMER_CTL_64BIT_WIDTH BIT(16)
+
+#define TIMER_INT 0x14
+#define TIMER_INT_EN BIT(0)
+#define TIMER_INT_RAW_STS BIT(1)
+#define TIMER_INT_MASK_STS BIT(2)
+#define TIMER_INT_CLR BIT(3)
+
+#define TIMER_VALUE_SHDW_LO 0x18
+#define TIMER_VALUE_SHDW_HI 0x1c
+
+#define TIMER_VALUE_LO_MASK GENMASK(31, 0)
+#define TIMER_VALUE_HI_SHIFT 32
+
+struct sprd_timer_device {
+ struct clock_event_device ce;
+ void __iomem *base;
+ u32 freq;
+ int irq;
+};
+
+static inline struct sprd_timer_device *
+to_sprd_timer(struct clock_event_device *c)
+{
+ return container_of(c, struct sprd_timer_device, ce);
+}
+
+static void sprd_timer_enable(struct sprd_timer_device *timer, u32 flag)
+{
+ u32 val = readl_relaxed(timer->base + TIMER_CTL);
+
+ val |= TIMER_CTL_ENABLE;
+ if (flag & TIMER_CTL_64BIT_WIDTH)
+ val |= TIMER_CTL_64BIT_WIDTH;
+ else
+ val &= ~TIMER_CTL_64BIT_WIDTH;
+
+ if (flag & TIMER_CTL_PERIOD_MODE)
+ val |= TIMER_CTL_PERIOD_MODE;
+ else
+ val &= ~TIMER_CTL_PERIOD_MODE;
+
+ writel_relaxed(val, timer->base + TIMER_CTL);
+}
+
+static void sprd_timer_disable(struct sprd_timer_device *timer)
+{
+ u32 val = readl_relaxed(timer->base + TIMER_CTL);
+
+ val &= ~TIMER_CTL_ENABLE;
+ writel_relaxed(val, timer->base + TIMER_CTL);
+}
+
+static void sprd_timer_update_counter(struct sprd_timer_device *timer,
+ unsigned long cycles)
+{
+ writel_relaxed(cycles & TIMER_VALUE_LO_MASK,
+ timer->base + TIMER_LOAD_LO);
+ writel_relaxed(cycles >> TIMER_VALUE_HI_SHIFT,
+ timer->base + TIMER_LOAD_HI);
+}
+
+static void sprd_timer_enable_interrupt(struct sprd_timer_device *timer)
+{
+ writel_relaxed(TIMER_INT_EN, timer->base + TIMER_INT);
+}
+
+static void sprd_timer_clear_interrupt(struct sprd_timer_device *timer)
+{
+ u32 val = readl_relaxed(timer->base + TIMER_INT);
+
+ val |= TIMER_INT_CLR;
+ writel_relaxed(val, timer->base + TIMER_INT);
+}
+
+static int sprd_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *ce)
+{
+ struct sprd_timer_device *timer = to_sprd_timer(ce);
+
+ sprd_timer_disable(timer);
+ sprd_timer_update_counter(timer, cycles);
+ sprd_timer_enable(timer, TIMER_CTL_64BIT_WIDTH);
+
+ return 0;
+}
+
+static int sprd_timer_set_periodic(struct clock_event_device *ce)
+{
+ struct sprd_timer_device *timer = to_sprd_timer(ce);
+ unsigned long cycles = DIV_ROUND_UP(timer->freq, HZ);
+
+ sprd_timer_disable(timer);
+ sprd_timer_update_counter(timer, cycles);
+ sprd_timer_enable(timer, TIMER_CTL_64BIT_WIDTH | TIMER_CTL_PERIOD_MODE);
+
+ return 0;
+}
+
+static int sprd_timer_shutdown(struct clock_event_device *ce)
+{
+ struct sprd_timer_device *timer = to_sprd_timer(ce);
+
+ sprd_timer_disable(timer);
+ return 0;
+}
+
+static irqreturn_t sprd_timer_interrupt(int irq, void *dev_id)
+{
+ struct sprd_timer_device *timer = dev_id;
+
+ sprd_timer_clear_interrupt(timer);
+
+ if (clockevent_state_oneshot(&timer->ce))
+ sprd_timer_disable(timer);
+
+ timer->ce.event_handler(&timer->ce);
+ return IRQ_HANDLED;
+}
+
+static void __init sprd_timer_clkevt_init(struct sprd_timer_device *timer)
+{
+ timer->ce.features = CLOCK_EVT_FEAT_DYNIRQ | CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT;
+ timer->ce.set_next_event = sprd_timer_set_next_event;
+ timer->ce.set_state_periodic = sprd_timer_set_periodic;
+ timer->ce.set_state_shutdown = sprd_timer_shutdown;
+ timer->ce.name = TIMER_NAME;
+ timer->ce.rating = 300;
+ timer->ce.irq = timer->irq;
+ timer->ce.cpumask = cpu_possible_mask;
+
+ sprd_timer_enable_interrupt(timer);
+ clockevents_config_and_register(&timer->ce, timer->freq, 1, UINT_MAX);
+}
+
+static int __init sprd_timer_init(struct device_node *np)
+{
+ struct sprd_timer_device *timer;
+ int ret;
+
+ timer = kzalloc(sizeof(*timer), GFP_KERNEL);
+ if (!timer)
+ return -ENOMEM;
+
+ ret = of_property_read_u32(np, "clock-frequency", &timer->freq);
+ if (ret) {
+ pr_err("failed to get clock frequency\n");
+ goto err_freq;
+ }
+
+ timer->base = of_iomap(np, 0);
+ if (!timer->base) {
+ pr_err("%s: unable to map resource\n", np->name);
+ ret = -ENXIO;
+ goto err_freq;
+ }
+
+ timer->irq = irq_of_parse_and_map(np, 0);
+ if (timer->irq < 0) {
+ pr_crit("%s: unable to parse timer irq\n", np->name);
+ ret = timer->irq;
+ goto err_map_irq;
+ }
+
+ ret = request_irq(timer->irq, sprd_timer_interrupt, IRQF_TIMER,
+ TIMER_NAME, timer);
+ if (ret) {
+ pr_err("failed to setup irq %d\n", timer->irq);
+ goto err_request_irq;
+ }
+
+ sprd_timer_clkevt_init(timer);
+
+ return 0;
+
+err_request_irq:
+ irq_dispose_mapping(timer->irq);
+err_map_irq:
+ iounmap(timer->base);
+err_freq:
+ kfree(timer);
+
+ return ret;
+}
+
+TIMER_OF_DECLARE(sc9860_timer, "sprd,sc9860-timer", sprd_timer_init);
--
1.7.9.5
