Hi Sebastien, On Thu, Nov 23, 2017 at 7:04 PM, Sebastien Bourdelin <[email protected]> wrote:
> + reg_vddio_sd0: regulator-vddio-sd0 {
> + compatible = "regulator-fixed";
> + regulator-name = "vddio-sd0";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
It seems this should be GPIO_ACTIVE_LOW instead, as you don't pass
'enable-active-high' here.
