On Mon, 2017-12-04 at 10:17 +0100, Jerome Brunet wrote:
> On Mon, 2017-12-04 at 14:00 +0800, Yixun Lan wrote:
> > From: Jian Hu <jian...@amlogic.com>
> >
> > Add PWM DT info for the Amlogic's Meson-Axg SoC.
> >
> > Signed-off-by: Jian Hu <jian...@amlogic.com>
> > Signed-off-by: Yixun Lan <yixun....@amlogic.com>
> > ---
> > arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 120
> > +++++++++++++++++++++++++++++
> > 1 file changed, 120 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> > b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> > index 92f65eec3e18..f7f228701df1 100644
> > --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> > +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> > @@ -177,6 +177,24 @@
> >
>
> [...]
>
> >
> > @@ -435,6 +537,24 @@
> > clock-names = "clk_i2c";
> > };
> >
> > + pwm_AO_ab: pwm@7000 {
> > + compatible = "amlogic,meson-axg-ao-pwm";
> > + reg = <0x0 0x07000 0x0 0x20>;
> > + #pwm-cells = <3>;
> > + clocks = <&xtal>, <&xtal>;
> > + clock-names = "clkin0", "clkin1";
>
> like gxbb, "amlogic,meson-axg-ao-pwm" does not have such clock bindings,
> Later on, if we want to "correctly" get the clock from DT, it will have to
> gothrough a new compatible, I guess.
Please ignore this comment (monday morning...)
However clock bindings for this should be defined in the board dts, not the soc
one
>
> > + status = "disabled";
> > + };
> > +
> > + pwm_AO_cd: pwm@2000 {
> > + compatible = "amlogic,axg-ao-pwm";
> > + reg = <0x0 0x02000 0x0 0x20>;
> > + #pwm-cells = <3>;
> > + clocks = <&xtal>, <&xtal>;
> > + clock-names = "clkin0", "clkin1";
> > + status = "disabled";
> > + };
> > +
> > uart_AO: serial@3000 {
> > compatible = "amlogic,meson-gx-uart",
> > "amlogic,meson-ao-uart";
> > reg = <0x0 0x3000 0x0 0x18>;
>
>
