Hello,
My D610 ALPS Glide Point is unresponsive with 2.6.21-mm1 patch.
No problem noticed with 2.6.21.
The culprit seems to be git-input. I have applied 2.6.21-mm1 on top of 2.6.21
and then removed git-input patch. It is ok since then.
>From what i can see, no interrupt is raised from the GlidePoint with git-input
applied. IRQ count 12 does not increase. It is when using the touchpad.
CPU0
0: 160 IO-APIC-edge timer
1: 935 IO-APIC-edge i8042
7: 0 IO-APIC-edge parport0
8: 1 IO-APIC-edge rtc
9: 2 IO-APIC-fasteoi acpi
=> 12: 114 IO-APIC-edge i8042 <=
14: 3223 IO-APIC-edge libata
15: 5 IO-APIC-edge libata
16: 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5, Intel ICH6
17: 1 IO-APIC-fasteoi uhci_hcd:usb2, ipw2200, Intel ICH6 Modem
18: 0 IO-APIC-fasteoi uhci_hcd:usb3
19: 1 IO-APIC-fasteoi uhci_hcd:usb4, yenta
NMI: 0
LOC: 4051
ERR: 0
MIS: 0
I have also tried to disable the ALPS driver in the .config file. IRQ 12 are
then raised when using the Glide Point. X refuses to start.
Any idea?
Remi Colinet
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
