From: Richard Leitner <richard.leit...@skidata.com>
Some PHYs need the refclk to be a continuous clock. Therefore they don't
allow turning it off and on again during operation. Nonetheless such a
clock switching is performed by some ETH drivers (namely FEC [1]) for
power saving reasons. An example for an affected PHY is the
SMSC/Microchip LAN8720 in "REF_CLK In Mode".
In order to provide a uniform method to overcome this problem this patch
adds a new phy_driver flag (PHY_RST_AFTER_CLK_EN) and corresponding
function phy_reset_after_clk_enable() to the phylib. These should be
used to trigger reset of the PHY after the refclk is switched on again.
[1] commit e8fcfcd5684a ("net: fec: optimize the clock management to save
power")
Signed-off-by: Richard Leitner <richard.leit...@skidata.com>
Reviewed-by: Andrew Lunn <and...@lunn.ch>
---
drivers/net/phy/phy_device.c | 24 ++++++++++++++++++++++++
include/linux/phy.h | 2 ++
2 files changed, 26 insertions(+)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 1de5e242b8b4..462c17ed87b8 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1218,6 +1218,30 @@ int phy_loopback(struct phy_device *phydev, bool enable)
}
EXPORT_SYMBOL(phy_loopback);
+/**
+ * phy_reset_after_clk_enable - perform a PHY reset if needed
+ * @phydev: target phy_device struct
+ *
+ * Description: Some PHYs are known to need a reset after their refclk was
+ * enabled. This function evaluates the flags and perform the reset if it's
+ * needed. Returns < 0 on error, 0 if the phy wasn't reset and 1 if the phy
+ * was reset.
+ */
+int phy_reset_after_clk_enable(struct phy_device *phydev)
+{
+ if (!phydev || !phydev->drv)
+ return -ENODEV;
+
+ if (phydev->drv->flags & PHY_RST_AFTER_CLK_EN) {
+ phy_device_reset(phydev, 1);
+ phy_device_reset(phydev, 0);
+ return 1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_reset_after_clk_enable);
+
/* Generic PHY support and helper functions */
/**
diff --git a/include/linux/phy.h b/include/linux/phy.h
index d3037e2ffbc4..c4b4715caa21 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -59,6 +59,7 @@
#define PHY_HAS_INTERRUPT 0x00000001
#define PHY_IS_INTERNAL 0x00000002
+#define PHY_RST_AFTER_CLK_EN 0x00000004
#define MDIO_DEVICE_IS_PHY 0x80000000
/* Interface Mode definitions */
@@ -853,6 +854,7 @@ int phy_aneg_done(struct phy_device *phydev);
int phy_stop_interrupts(struct phy_device *phydev);
int phy_restart_aneg(struct phy_device *phydev);
+int phy_reset_after_clk_enable(struct phy_device *phydev);
static inline void phy_device_reset(struct phy_device *phydev, int value)
{
--
2.11.0
