Signed-off-by: Grant Likely <[EMAIL PROTECTED]>
---
Updated patch based on comments received from mailing list. I think
I've addressed all the comments except the idea of moving this to a
new style i2c driver.
drivers/i2c/chips/ds1682.c | 315 ++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 315 insertions(+), 0 deletions(-)
diff --git a/drivers/i2c/chips/ds1682.c b/drivers/i2c/chips/ds1682.c
new file mode 100644
index 0000000..b7f33e5
--- /dev/null
+++ b/drivers/i2c/chips/ds1682.c
@@ -0,0 +1,315 @@
+/*
+ * Dallas Semiconductor DS1682 Elapsed Time Recorder device driver
+ *
+ * Written by: Grant Likely <[EMAIL PROTECTED]>
+ *
+ * Copyright (C) 2007 Secret Lab Technologies Ltd.
+ * Copyright (C) 2005 James Chapman <[EMAIL PROTECTED]>
+ * Copyright (C) 2000 Russell King
+ *
+ * Derived from ds1337 real time clock device driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The DS1682 elapsed timer recorder is a simple device that implements
+ * one elapsed time counter, one event counter, an alarm signal and 10
+ * bytes of general purpose EEPROM.
+ *
+ * This driver provides access to the DS1682 counters and user data via
+ * the sysfs. The following attributes are added to the device node:
+ * elapsed_time (u32): Total elapsed event time in ms resolution
+ * alarm_time (u32): When elapsed time exceeds the value in alarm_time,
+ * then the alarm pin is asserted.
+ * event_count (u16): number of times the event pin has gone low.
+ * eeprom (u8[10]): general purpose EEPROM
+ *
+ * Counter registers and user data are both read/write unless the device
+ * has been write protected. This driver does not support turning off write
+ * protection. Once write protection is turned on, it is impossible to
+ * turn it off again, so I have left the feature out of this driver to avoid
+ * accidental enabling, but it is trivial to add write protect support.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/string.h>
+#include <linux/list.h>
+#include <linux/sysfs.h>
+#include <linux/ctype.h>
+#include <linux/hwmon-sysfs.h>
+
+/* Device registers */
+#define DS1682_REG_CONFIG 0x00
+#define DS1682_REG_ALARM 0x01
+#define DS1682_REG_ELAPSED 0x05
+#define DS1682_REG_EVT_CNTR 0x09
+#define DS1682_REG_EEPROM 0x0b
+#define DS1682_REG_RESET 0x1d
+#define DS1682_REG_WRITE_DISABLE 0x1e
+#define DS1682_REG_WRITE_MEM_DISABLE 0x1f
+
+#define DS1682_EEPROM_SIZE 10
+
+/*
+ * Device address
+ */
+static unsigned short normal_i2c[] = { 0x6B, I2C_CLIENT_END };
+I2C_CLIENT_INSMOD;
+
+/*
+ * Low level chip access functions
+ */
+static int ds1682_read(struct i2c_client *client, int reg, void *buf, int len)
+{
+ u8 *bytes = buf;
+ int val;
+
+ dev_dbg(&client->dev, "ds1682_read(reg=%i, buf=%p, len=%i)\n",
+ reg, buf, len);
+
+ while (len--) {
+ val = i2c_smbus_read_byte_data(client, reg++);
+ if (val < 0)
+ return -EIO;
+ *bytes++ = val;
+ }
+ return 0;
+}
+
+/*
+ * Generic counter attributes
+ */
+static ssize_t ds1682_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ __le32 val = 0;
+
+ dev_dbg(dev, "ds1682_show() called on %s\n", attr->attr.name);
+
+ /* Read the register */
+ if (ds1682_read(to_i2c_client(dev), sattr->index, &val, sattr->nr))
+ return -EIO;
+
+ /* Special case: the 32 bit regs are time values with 1/4s
+ * resolution, scale them up to milliseconds */
+ if (sattr->nr == 4)
+ return sprintf(buf, "%lli\n", ((u64) le32_to_cpu(val)) * 250);
+
+ /* Format the output string and return # of bytes */
+ return sprintf(buf, "%li\n", (long)le32_to_cpu(val));
+}
+
+static ssize_t ds1682_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ char *endp;
+ u64 val;
+ __le32 val_le;
+ int rc;
+
+ dev_dbg(dev, "ds1682_store() called on %s\n", attr->attr.name);
+
+ /* Decode input */
+ val = simple_strtoull(buf, &endp, 0);
+ if (buf == endp) {
+ dev_dbg(dev, "input string not a number\n");
+ return -EIO;
+ }
+
+ /* Special case: the 32 bit regs are time values with 1/4s
+ * resolution, scale input down to quarter-seconds */
+ if (sattr->nr == 4)
+ do_div(val, 250);
+
+ /* write out the value */
+ val_le = cpu_to_le32(val);
+ rc = i2c_smbus_write_i2c_block_data(client, sattr->index, sattr->nr,
+ (u8 *) & val);
+ if (rc < 0) {
+ dev_err(dev, "register write failed; reg=0x%x, size=%i\n",
+ sattr->index, sattr->nr);
+ return -EIO;
+ }
+
+ return count;
+}
+
+/*
+ * Simple register attributes
+ */
+SENSOR_DEVICE_ATTR_2(config, S_IRUGO, ds1682_show, NULL, DS1682_REG_CONFIG, 1);
+SENSOR_DEVICE_ATTR_2(elapsed_time, S_IRUGO | S_IWUSR, ds1682_show,
ds1682_store,
+ 4, DS1682_REG_ELAPSED);
+SENSOR_DEVICE_ATTR_2(alarm_time, S_IRUGO | S_IWUSR, ds1682_show, ds1682_store,
+ 4, DS1682_REG_ALARM);
+SENSOR_DEVICE_ATTR_2(event_count, S_IRUGO | S_IWUSR, ds1682_show, ds1682_store,
+ 2, DS1682_REG_EVT_CNTR);
+
+static const struct attribute_group ds1682_group = {
+ .attrs = (struct attribute *[]) {
+ &sensor_dev_attr_config.dev_attr.attr,
+ &sensor_dev_attr_elapsed_time.dev_attr.attr,
+ &sensor_dev_attr_alarm_time.dev_attr.attr,
+ &sensor_dev_attr_event_count.dev_attr.attr,
+ NULL,
+ },
+};
+
+/*
+ * User data attribute
+ */
+static ssize_t ds1682_eeprom_read(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct i2c_client *client = kobj_to_i2c_client(kobj);
+
+ dev_dbg(&client->dev, "ds1682_eeprom_read(buf=%p, off=%i, count=%i)\n",
+ buf, (int)off, (int)count);
+
+ if (off > DS1682_EEPROM_SIZE)
+ return 0;
+
+ if (off + count > DS1682_EEPROM_SIZE)
+ count = DS1682_EEPROM_SIZE - off;
+
+ if (ds1682_read(client, DS1682_REG_EEPROM + off, buf, count))
+ return -EIO;
+
+ return count;
+}
+
+static ssize_t ds1682_eeprom_write(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct i2c_client *client = kobj_to_i2c_client(kobj);
+
+ dev_dbg(&client->dev, "ds1682_eeprom_write(buf=%p, off=%i, count=%i)\n",
+ buf, (int)off, (int)count);
+
+ if (off >= DS1682_EEPROM_SIZE)
+ return -ENOSPC;
+
+ if (off + count > DS1682_EEPROM_SIZE)
+ count = DS1682_EEPROM_SIZE - off;
+
+ /* Write out to the device */
+ if (i2c_smbus_write_i2c_block_data(client, DS1682_REG_EEPROM + off,
+ count, buf) < 0)
+ return -EIO;
+
+ return count;
+}
+
+static struct bin_attribute ds1682_eeprom_attr = {
+ .attr = {
+ .name = "eeprom",
+ .mode = S_IRUGO | S_IWUSR,
+ .owner = THIS_MODULE,
+ },
+ .size = DS1682_EEPROM_SIZE,
+ .read = ds1682_eeprom_read,
+ .write = ds1682_eeprom_write,
+};
+
+/*
+ * Called when a device is found at the ds1682 address
+ */
+static struct i2c_driver ds1682_driver;
+static int ds1682_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ struct i2c_client *client;
+ int err = 0;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA |
+ I2C_FUNC_SMBUS_WRITE_I2C_BLOCK))
+ goto exit;
+
+ if (!(client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ client->addr = address;
+ client->adapter = adapter;
+ client->driver = &ds1682_driver;
+
+ /* Note: Ignoring 'kind' value as the ds1682 uses a fixed address */
+
+ /* We can fill in the remaining client fields */
+ strlcpy(client->name, "ds1682", I2C_NAME_SIZE);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(client)))
+ goto exit_free;
+
+ if (sysfs_create_group(&client->dev.kobj, &ds1682_group))
+ goto exit_group_attr;
+
+ if (sysfs_create_bin_file(&client->dev.kobj, &ds1682_eeprom_attr))
+ goto exit_bin_attr;
+
+ return 0;
+
+ exit_bin_attr:
+ sysfs_remove_group(&client->dev.kobj, &ds1682_group);
+ exit_group_attr:
+ i2c_detach_client(client);
+ exit_free:
+ kfree(client);
+ exit:
+ return err;
+}
+
+static int ds1682_attach_adapter(struct i2c_adapter *adapter)
+{
+ return i2c_probe(adapter, &addr_data, ds1682_detect);
+}
+
+static int ds1682_detach_client(struct i2c_client *client)
+{
+ int err;
+
+ sysfs_remove_bin_file(&client->dev.kobj, &ds1682_eeprom_attr);
+ sysfs_remove_group(&client->dev.kobj, &ds1682_group);
+
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(client);
+ return 0;
+}
+
+static struct i2c_driver ds1682_driver = {
+ .driver = {
+ .name = "ds1682",
+ },
+ .attach_adapter = ds1682_attach_adapter,
+ .detach_client = ds1682_detach_client,
+};
+
+static int __init ds1682_init(void)
+{
+ return i2c_add_driver(&ds1682_driver);
+}
+
+static void __exit ds1682_exit(void)
+{
+ i2c_del_driver(&ds1682_driver);
+}
+
+MODULE_AUTHOR("Grant Likely <[EMAIL PROTECTED]>");
+MODULE_DESCRIPTION("DS1682 Elapsed Time Indicator driver");
+MODULE_LICENSE("GPL");
+
+module_init(ds1682_init);
+module_exit(ds1682_exit);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
