Like axp221, axp223, axp813 the axp803 is also supporting external regulator to drive the OTG VBus through N_VBUSEN PMIC pin.
Add support for it. Signed-off-by: Jagan Teki <[email protected]> --- Changes for v2: - New patch Documentation/devicetree/bindings/mfd/axp20x.txt | 2 +- drivers/regulator/axp20x-regulator.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt index 9455503..34f24a2 100644 --- a/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -43,7 +43,7 @@ Optional properties: regulator to drive the OTG VBus, rather then as an input pin which signals whether the board is driving OTG VBus or not. - (axp221 / axp223 / axp813 only) + (axp221 / axp223 / axp803/ axp813 only) - x-powers,master-mode: Boolean (axp806 only). Set this when the PMIC is wired for master mode. The default is slave mode. diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 181622b..91b8ff8 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -721,6 +721,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev) case AXP803_ID: regulators = axp803_regulators; nregulators = AXP803_REG_ID_MAX; + drivevbus = of_property_read_bool(pdev->dev.parent->of_node, + "x-powers,drive-vbus-en"); break; case AXP806_ID: regulators = axp806_regulators; -- 2.7.4
