OK, I built a kernel 4.14.5 from vanilla kernel.org sources using the Fedora 
.config (couldn't get the Fedora package to build).

I see no difference with both [0, 1] patches applied and the tpm modules loaded 
-- no keyboard or touchpad.

[Note: I'm not *consciously* using the TPM for anything, but /dev/tpm0 is 
present and have never initialised it. I don't know if anything in Fedora uses 
it by default if present.]

Regards,
James.


On 12/12/17 11:38, Javier Martinez Canillas wrote:
> Hello James,
> 
> On 12/11/2017 08:37 PM, James Ettle wrote:
>> Hello,
>>
>> [First: Apologies if cross-posting from Kernel.org BZ is bad form; my distro 
>> BZ advised I post this to your mailing list as well.]
>>
>> Situation: enabling TPM on a Clevo W510LU with an Intel N3160 CPU breaks 
>> PS/2 keyboard and mouse. They just don't respond until after a 
>> suspend/resume cycle, and after that they later stop after a while.
>>
>> I have confirmed this by blacklisting tpm modules. I noticed this first with 
>> kernel 4.13, and have bisected it down to:
>>
>> 5e572cab92f0bb56ca1e6e5ee4d807663a7ccbad is the first bad commit
>> commit 5e572cab92f0bb56ca1e6e5ee4d807663a7ccbad
>> Author: Azhar Shaikh <azhar.sha...@intel.com>
>> Date:   Sun Jun 18 19:17:59 2017 -0700
>>
>>     tpm: Enable CLKRUN protocol for Braswell systems
>>     
>>     To overcome a hardware limitation on Intel Braswell systems,
>>     disable CLKRUN protocol during TPM transactions and re-enable
>>     once the transaction is completed.
>>     
>>     Signed-off-by: Azhar Shaikh <azhar.sha...@intel.com>
>>     Reviewed-by: Jarkko Sakkinen <jarkko.sakki...@linux.intel.com>
>>     Tested-by: Jarkko Sakkinen <jarkko.sakki...@linux.intel.com>
>>     Signed-off-by: Jarkko Sakkinen <jarkko.sakki...@linux.intel.com>
>>     Signed-off-by: James Morris <james.l.mor...@oracle.com>
>>
>> :040000 040000 5437c91886cb62c497255f2c60dbedd7268ab50d 
>> 1863a1738ded35a817aad52f9f2b451bd43623d7 M   drivers
>>
>> Currently in Kernel.org bugzilla 197287.
>>
>> Please let me know if you need any further info.
>>
> 
> I don't have access to a Braswell machine to reproduce this. I tried to do it
> on different Intel systems by modifying is_bsw() to always return true, but
> that didn't work either. They work correctly even when CLKRUN_EN is toggled.
> 
> I'm not familiar with LPC so please let me know if my assumptions are wrong,
> but I find suspicious that a driver for a single device attached to the bus
> can control the CLKRUN# signal which AFAIU may be needed for other devices.
> 
> So that would explain why the mentioned commit causes issues for PS/2 mouse
> and keyboards, since these are attached to the LPC bus and may rely on the
> CLKRUN# signal for proper operation.
> 
> I see that the following [0,1] patches for the tpm_tis driver landed a few
> days ago, they change how the CLKRUN protocol is enabled/disabled. Instead
> of doing it per each TPM transaction, it does it once for the duration of
> a TPM command.
> 
> Not sure if that will make things better or worse for you, but it would be
> good to try in case it makes a difference.
> 
> [0]: 
> http://git.infradead.org/users/jjs/linux-tpmdd.git/commit/667dcc75be864ff4c17cf58891853b7393bba3e2
> [1]: 
> http://git.infradead.org/users/jjs/linux-tpmdd.git/commit/db3248e8a036c39141c8f7e9f1cf5c5ae6815f76
> 
>> Many thanks,
>> James.
>>
> 
> Best regards,
> 

Reply via email to