Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e
"s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e
"s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format
error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x
from bindings notation")
Reported-by: David Daney <[email protected]>
Suggested-by: Rob Herring <[email protected]>
Signed-off-by: Mathieu Malaterre <[email protected]>
---
arch/arm/boot/dts/am33xx.dtsi | 4 ++--
arch/arm/boot/dts/am3517.dtsi | 4 ++--
arch/arm/boot/dts/am4372.dtsi | 4 ++--
arch/arm/boot/dts/dra62x-j5eco-evm.dts | 8 ++++----
arch/arm/boot/dts/dra7.dtsi | 2 +-
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 8 ++++----
arch/arm/boot/dts/omap3-evm-37xx.dts | 8 ++++----
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 8 ++++----
8 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index d37f95025807..6699fcb77509 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -496,7 +496,7 @@
status = "disabled";
};
- mailbox: mailbox@480C8000 {
+ mailbox: mailbox@480c8000 {
compatible = "ti,omap4-mailbox";
reg = <0x480C8000 0x200>;
interrupts = <77>;
@@ -991,7 +991,7 @@
dma-names = "tx", "rx";
};
- mcasp1: mcasp@4803C000 {
+ mcasp1: mcasp@4803c000 {
compatible = "ti,am33xx-mcasp-audio";
ti,hwmods = "mcasp1";
reg = <0x4803C000 0x2000>,
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index 00da3f2c4072..76994165fb3a 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -26,7 +26,7 @@
interrupt-names = "mc";
};
- davinci_emac: ethernet@0x5c000000 {
+ davinci_emac: ethernet@5c000000 {
compatible = "ti,am3517-emac";
ti,hwmods = "davinci_emac";
status = "disabled";
@@ -41,7 +41,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
};
- davinci_mdio: ethernet@0x5c030000 {
+ davinci_mdio: ethernet@5c030000 {
compatible = "ti,davinci_mdio";
ti,hwmods = "davinci_mdio";
status = "disabled";
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 4714a59fd86d..5aff7f01a513 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -325,7 +325,7 @@
status = "disabled";
};
- mailbox: mailbox@480C8000 {
+ mailbox: mailbox@480c8000 {
compatible = "ti,omap4-mailbox";
reg = <0x480C8000 0x200>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -936,7 +936,7 @@
dma-names = "tx", "rx";
};
- mcasp1: mcasp@4803C000 {
+ mcasp1: mcasp@4803c000 {
compatible = "ti,am33xx-mcasp-audio";
ti,hwmods = "mcasp1";
reg = <0x4803C000 0x2000>,
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts
b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
index 155eb32ee213..fee0547f7302 100644
--- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts
+++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -74,19 +74,19 @@
label = "X-Loader";
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
- partition@0x1c0000 {
+ partition@1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
- partition@0x780000 {
+ partition@780000 {
label = "Filesystem";
reg = <0x780000 0xf880000>;
};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index ac9216293b7c..f8f5206130d6 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1373,7 +1373,7 @@
ranges;
reg = <0x4a090000 0x20>;
ti,hwmods = "ocp2scp3";
- sata_phy: phy@4A096000 {
+ sata_phy: phy@4a096000 {
compatible = "ti,phy-pipe3-sata";
reg = <0x4A096000 0x80>, /* phy_rx */
<0x4A096400 0x64>, /* phy_tx */
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index ab6003fe5a43..9dcb18d22cde 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -306,19 +306,19 @@
label = "xloader";
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "uboot";
reg = <0x80000 0x1e0000>;
};
- partition@0x260000 {
+ partition@260000 {
label = "uboot environment";
reg = <0x260000 0x40000>;
};
- partition@0x2a0000 {
+ partition@2a0000 {
label = "linux";
reg = <0x2a0000 0x400000>;
};
- partition@0x6a0000 {
+ partition@6a0000 {
label = "rootfs";
reg = <0x6a0000 0x1f880000>;
};
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts
b/arch/arm/boot/dts/omap3-evm-37xx.dts
index 5a4ba0aea447..a14303b09ae2 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -90,19 +90,19 @@
label = "X-Loader";
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
- partition@0x1c0000 {
+ partition@1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
- partition@0x780000 {
+ partition@780000 {
label = "Filesystem";
reg = <0x780000 0x1f880000>;
};
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index 7ada1e93e166..cf7a2a72348d 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -405,22 +405,22 @@
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "u-boot";
reg = <0x80000 0x1e0000>;
};
- partition@0x260000 {
+ partition@260000 {
label = "u-boot-environment";
reg = <0x260000 0x20000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "kernel";
reg = <0x280000 0x500000>;
};
- partition@0x780000 {
+ partition@780000 {
label = "filesystem";
reg = <0x780000 0xf880000>;
};
--
2.11.0
