Thanks for your review comments.
On 16/12/17 17:44, Rob Herring wrote:
On Thu, Dec 14, 2017 at 05:34:00PM +0000, srinivas.kandaga...@linaro.org wrote:
From: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
Add devicetree bindings documentation file for Qualcomm apq8096 sound card.
Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
---
.../devicetree/bindings/sound/qcom,apq8096.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,apq8096.txt
diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
new file mode 100644
index 000000000000..27b511dab533
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt
@@ -0,0 +1,22 @@
+* Qualcomm Technologies APQ8096 ASoC sound card driver
+
+This binding describes the APQ8096 sound card, which uses qdsp for audio.
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must be "qcom,apq8096-sndcard"
+
+- qcom,audio-routing:
+ Usage: Optional
+ Value type: <stringlist>
+ Definition: A list of the connections between audio components.
+ Each entry is a pair of strings, the first being the
+ connection's sink, the second being the connection's
+ source. Valid names could be power supplies, MicBias
+ of codec and the jacks on the board:
+Example:
+ sound {
+ compatible = "qcom,snd-apq8096";
+ qcom,model = "DB820c";
Not documented, but just use "model".
Yep, I will use that in next version.
This doesn't look complete. No codec, etc.?
All the dai links are done in non-DT way directly in the sound card driver.
Thanks,
Srini
Rob
