CC Eric
On 01/05/18 at 12:38pm, Baoquan He wrote:
> In commit
>
> commit 522e66464467 ("x86/apic: Disable I/O APIC before shutdown of the local
> APIC").
>
> lapic_shutdown() invocation is moved after disable_IO_APIC(). In fact
> in disable_IO_APIC(), it not only calls clear_IO_APIC() to disable
> IO-APIC, also sets sets LAPIC and IO-APIC to make system be PIC or
> Virtual wire mode. While the above commit putting disable_IO_APIC earlier
> causes local APIC is completely disabled. So the legacy irq mode is
> disabled too before jump to kexec/kdump kernel.
>
> In normal kernel it defaults to be PIC mode or Virtual Wire mode during
> system initialization before APIC mode is enabled and this is done by
> BIOS initialization. But kexec/kdump kernel won't go through BIOS, so
> we should set system as PIC or Virtual Wire mode before jump to kdump
> kernel code directly.
>
> So let's take clear_IO_APIC out from disable_IO_APIC and rename
> disable_IO_APIC as switch_to_legacy_irq_mode. Then only call clear_IO_APIC
> when IO-APIC need be disabled. And call switch_to_legacy_irq_mode before
> kexec/kdump jumping.
>
> Signed-off-by: Baoquan He <b...@redhat.com>
> ---
> arch/x86/include/asm/io_apic.h | 3 ++-
> arch/x86/kernel/apic/io_apic.c | 12 ++++--------
> arch/x86/kernel/crash.c | 2 +-
> arch/x86/kernel/machine_kexec_32.c | 15 +++++----------
> arch/x86/kernel/machine_kexec_64.c | 15 +++++----------
> arch/x86/kernel/reboot.c | 2 +-
> 6 files changed, 18 insertions(+), 31 deletions(-)
>
> diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
> index a8834dd546cd..e38ad3863a2c 100644
> --- a/arch/x86/include/asm/io_apic.h
> +++ b/arch/x86/include/asm/io_apic.h
> @@ -192,7 +192,8 @@ static inline unsigned int io_apic_read(unsigned int
> apic, unsigned int reg)
>
> extern void setup_IO_APIC(void);
> extern void enable_IO_APIC(void);
> -extern void disable_IO_APIC(void);
> +extern void clear_IO_APIC (void);
> +extern void switch_to_legacy_irq_mode(void);
> extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin);
> extern void print_IO_APICs(void);
> #else /* !CONFIG_X86_IO_APIC */
> diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
> index 8a7963421460..a47aa915d18c 100644
> --- a/arch/x86/kernel/apic/io_apic.c
> +++ b/arch/x86/kernel/apic/io_apic.c
> @@ -587,7 +587,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned
> int pin)
> mpc_ioapic_id(apic), pin);
> }
>
> -static void clear_IO_APIC (void)
> +void clear_IO_APIC (void)
> {
> int apic, pin;
>
> @@ -1439,15 +1439,11 @@ void native_disable_io_apic(void)
> }
>
> /*
> - * Not an __init, needed by the reboot code
> + * Not an __init, needed by kexec/kdump code.
> + * For safety IO-APIC and Local APIC need be cleared before this.
> */
> -void disable_IO_APIC(void)
> +void switch_to_legacy_irq_mode(void)
> {
> - /*
> - * Clear the IO-APIC before rebooting:
> - */
> - clear_IO_APIC();
> -
> if (!nr_legacy_irqs())
> return;
>
> diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
> index 10e74d4778a1..318ffeaaf55a 100644
> --- a/arch/x86/kernel/crash.c
> +++ b/arch/x86/kernel/crash.c
> @@ -199,7 +199,7 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
> #ifdef CONFIG_X86_IO_APIC
> /* Prevent crash_kexec() from deadlocking on ioapic_lock. */
> ioapic_zap_locks();
> - disable_IO_APIC();
> + clear_IO_APIC();
> #endif
> lapic_shutdown();
> #ifdef CONFIG_HPET_TIMER
> diff --git a/arch/x86/kernel/machine_kexec_32.c
> b/arch/x86/kernel/machine_kexec_32.c
> index edfede768688..7ab10d930cc6 100644
> --- a/arch/x86/kernel/machine_kexec_32.c
> +++ b/arch/x86/kernel/machine_kexec_32.c
> @@ -190,18 +190,13 @@ void machine_kexec(struct kimage *image)
> local_irq_disable();
> hw_breakpoint_disable();
>
> - if (image->preserve_context) {
> #ifdef CONFIG_X86_IO_APIC
> - /*
> - * We need to put APICs in legacy mode so that we can
> - * get timer interrupts in second kernel. kexec/kdump
> - * paths already have calls to disable_IO_APIC() in
> - * one form or other. kexec jump path also need
> - * one.
> - */
> - disable_IO_APIC();
> + /*
> + * We need to put APICs in legacy mode so that we can
> + * get timer interrupts in second kernel.
> + */
> + switch_to_legacy_irq_mode();
> #endif
> - }
>
> control_page = page_address(image->control_code_page);
> memcpy(control_page, relocate_kernel, KEXEC_CONTROL_CODE_MAX_SIZE);
> diff --git a/arch/x86/kernel/machine_kexec_64.c
> b/arch/x86/kernel/machine_kexec_64.c
> index 1f790cf9d38f..b5c0cbed6791 100644
> --- a/arch/x86/kernel/machine_kexec_64.c
> +++ b/arch/x86/kernel/machine_kexec_64.c
> @@ -288,18 +288,13 @@ void machine_kexec(struct kimage *image)
> local_irq_disable();
> hw_breakpoint_disable();
>
> - if (image->preserve_context) {
> #ifdef CONFIG_X86_IO_APIC
> - /*
> - * We need to put APICs in legacy mode so that we can
> - * get timer interrupts in second kernel. kexec/kdump
> - * paths already have calls to disable_IO_APIC() in
> - * one form or other. kexec jump path also need
> - * one.
> - */
> - disable_IO_APIC();
> + /*
> + * We need to put APICs in legacy mode so that we can
> + * get timer interrupts in second kernel.
> + */
> + switch_to_legacy_irq_mode();
> #endif
> - }
>
> control_page = page_address(image->control_code_page) + PAGE_SIZE;
> memcpy(control_page, relocate_kernel, KEXEC_CONTROL_CODE_MAX_SIZE);
> diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
> index 2126b9d27c34..b70cc0f38a29 100644
> --- a/arch/x86/kernel/reboot.c
> +++ b/arch/x86/kernel/reboot.c
> @@ -666,7 +666,7 @@ void native_machine_shutdown(void)
> * Even without the erratum, it still makes sense to quiet IO APIC
> * before disabling Local APIC.
> */
> - disable_IO_APIC();
> + clear_IO_APIC();
> #endif
>
> #ifdef CONFIG_SMP
> --
> 2.5.5
>
