On Thu, Jan 18, 2018 at 08:52:56PM +0100, Corentin Labbe wrote:
> Since AVR32 is gone, this driver is useless.
>
Quite true.
> Signed-off-by: Corentin Labbe <clabbe.montj...@gmail.com>
Reviewed-by: Guenter Roeck <li...@roeck-us.net>
> ---
> drivers/watchdog/Kconfig | 9 -
> drivers/watchdog/Makefile | 3 -
> drivers/watchdog/at32ap700x_wdt.c | 433
> --------------------------------------
> 3 files changed, 445 deletions(-)
> delete mode 100644 drivers/watchdog/at32ap700x_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 34d1c6851fa7..aff773bcebdb 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -814,15 +814,6 @@ config SPRD_WATCHDOG
> Say Y here to include watchdog timer supported
> by Spreadtrum system.
>
> -# AVR32 Architecture
> -
> -config AT32AP700X_WDT
> - tristate "AT32AP700x watchdog"
> - depends on CPU_AT32AP700X || COMPILE_TEST
> - help
> - Watchdog timer embedded into AT32AP700x devices. This will reboot
> - your system when the timeout is reached.
> -
> # BLACKFIN Architecture
>
> config BFIN_WDT
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index b43bab87ff62..0474d38aa854 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -91,9 +91,6 @@ obj-$(CONFIG_UNIPHIER_WATCHDOG) += uniphier_wdt.o
> obj-$(CONFIG_RTD119X_WATCHDOG) += rtd119x_wdt.o
> obj-$(CONFIG_SPRD_WATCHDOG) += sprd_wdt.o
>
> -# AVR32 Architecture
> -obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
> -
> # BLACKFIN Architecture
> obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o
>
> diff --git a/drivers/watchdog/at32ap700x_wdt.c
> b/drivers/watchdog/at32ap700x_wdt.c
> deleted file mode 100644
> index 81ba8920f127..000000000000
> --- a/drivers/watchdog/at32ap700x_wdt.c
> +++ /dev/null
> @@ -1,433 +0,0 @@
> -/*
> - * Watchdog driver for Atmel AT32AP700X devices
> - *
> - * Copyright (C) 2005-2006 Atmel Corporation
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - *
> - *
> - * Errata: WDT Clear is blocked after WDT Reset
> - *
> - * A watchdog timer event will, after reset, block writes to the WDT_CLEAR
> - * register, preventing the program to clear the next Watchdog Timer Reset.
> - *
> - * If you still want to use the WDT after a WDT reset a small code can be
> - * insterted at the startup checking the AVR32_PM.rcause register for WDT
> reset
> - * and use a GPIO pin to reset the system. This method requires that one of
> the
> - * GPIO pins are available and connected externally to the RESET_N pin. After
> - * the GPIO pin has pulled down the reset line the GPIO will be reset and
> leave
> - * the pin tristated with pullup.
> - */
> -
> -#include <linux/init.h>
> -#include <linux/kernel.h>
> -#include <linux/module.h>
> -#include <linux/moduleparam.h>
> -#include <linux/miscdevice.h>
> -#include <linux/fs.h>
> -#include <linux/platform_device.h>
> -#include <linux/watchdog.h>
> -#include <linux/uaccess.h>
> -#include <linux/io.h>
> -#include <linux/spinlock.h>
> -#include <linux/slab.h>
> -
> -#define TIMEOUT_MIN 1
> -#define TIMEOUT_MAX 2
> -#define TIMEOUT_DEFAULT TIMEOUT_MAX
> -
> -/* module parameters */
> -static int timeout = TIMEOUT_DEFAULT;
> -module_param(timeout, int, 0);
> -MODULE_PARM_DESC(timeout,
> - "Timeout value. Limited to be 1 or 2 seconds. (default="
> - __MODULE_STRING(TIMEOUT_DEFAULT) ")");
> -
> -static bool nowayout = WATCHDOG_NOWAYOUT;
> -module_param(nowayout, bool, 0);
> -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started
> (default="
> - __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> -
> -/* Watchdog registers and write/read macro */
> -#define WDT_CTRL 0x00
> -#define WDT_CTRL_EN 0
> -#define WDT_CTRL_PSEL 8
> -#define WDT_CTRL_KEY 24
> -
> -#define WDT_CLR 0x04
> -
> -#define WDT_RCAUSE 0x10
> -#define WDT_RCAUSE_POR 0
> -#define WDT_RCAUSE_EXT 2
> -#define WDT_RCAUSE_WDT 3
> -#define WDT_RCAUSE_JTAG 4
> -#define WDT_RCAUSE_SERP 5
> -
> -#define WDT_BIT(name) (1 << WDT_##name)
> -#define WDT_BF(name, value) ((value) << WDT_##name)
> -
> -#define wdt_readl(dev, reg) \
> - __raw_readl((dev)->regs + WDT_##reg)
> -#define wdt_writel(dev, reg, value) \
> - __raw_writel((value), (dev)->regs + WDT_##reg)
> -
> -struct wdt_at32ap700x {
> - void __iomem *regs;
> - spinlock_t io_lock;
> - int timeout;
> - int boot_status;
> - unsigned long users;
> - struct miscdevice miscdev;
> -};
> -
> -static struct wdt_at32ap700x *wdt;
> -static char expect_release;
> -
> -/*
> - * Disable the watchdog.
> - */
> -static inline void at32_wdt_stop(void)
> -{
> - unsigned long psel;
> -
> - spin_lock(&wdt->io_lock);
> - psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f);
> - wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55));
> - wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa));
> - spin_unlock(&wdt->io_lock);
> -}
> -
> -/*
> - * Enable and reset the watchdog.
> - */
> -static inline void at32_wdt_start(void)
> -{
> - /* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
> - unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe;
> -
> - spin_lock(&wdt->io_lock);
> - wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
> - | WDT_BF(CTRL_PSEL, psel)
> - | WDT_BF(CTRL_KEY, 0x55));
> - wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
> - | WDT_BF(CTRL_PSEL, psel)
> - | WDT_BF(CTRL_KEY, 0xaa));
> - spin_unlock(&wdt->io_lock);
> -}
> -
> -/*
> - * Pat the watchdog timer.
> - */
> -static inline void at32_wdt_pat(void)
> -{
> - spin_lock(&wdt->io_lock);
> - wdt_writel(wdt, CLR, 0x42);
> - spin_unlock(&wdt->io_lock);
> -}
> -
> -/*
> - * Watchdog device is opened, and watchdog starts running.
> - */
> -static int at32_wdt_open(struct inode *inode, struct file *file)
> -{
> - if (test_and_set_bit(1, &wdt->users))
> - return -EBUSY;
> -
> - at32_wdt_start();
> - return nonseekable_open(inode, file);
> -}
> -
> -/*
> - * Close the watchdog device.
> - */
> -static int at32_wdt_close(struct inode *inode, struct file *file)
> -{
> - if (expect_release == 42) {
> - at32_wdt_stop();
> - } else {
> - dev_dbg(wdt->miscdev.parent,
> - "unexpected close, not stopping watchdog!\n");
> - at32_wdt_pat();
> - }
> - clear_bit(1, &wdt->users);
> - expect_release = 0;
> - return 0;
> -}
> -
> -/*
> - * Change the watchdog time interval.
> - */
> -static int at32_wdt_settimeout(int time)
> -{
> - /*
> - * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is
> - * 2 ^ 16 allowing up to 2 seconds timeout.
> - */
> - if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX))
> - return -EINVAL;
> -
> - /*
> - * Set new watchdog time. It will be used when at32_wdt_start() is
> - * called.
> - */
> - wdt->timeout = time;
> - return 0;
> -}
> -
> -/*
> - * Get the watchdog status.
> - */
> -static int at32_wdt_get_status(void)
> -{
> - int rcause;
> - int status = 0;
> -
> - rcause = wdt_readl(wdt, RCAUSE);
> -
> - switch (rcause) {
> - case WDT_BIT(RCAUSE_EXT):
> - status = WDIOF_EXTERN1;
> - break;
> - case WDT_BIT(RCAUSE_WDT):
> - status = WDIOF_CARDRESET;
> - break;
> - case WDT_BIT(RCAUSE_POR): /* fall through */
> - case WDT_BIT(RCAUSE_JTAG): /* fall through */
> - case WDT_BIT(RCAUSE_SERP): /* fall through */
> - default:
> - break;
> - }
> -
> - return status;
> -}
> -
> -static const struct watchdog_info at32_wdt_info = {
> - .identity = "at32ap700x watchdog",
> - .options = WDIOF_SETTIMEOUT |
> - WDIOF_KEEPALIVEPING |
> - WDIOF_MAGICCLOSE,
> -};
> -
> -/*
> - * Handle commands from user-space.
> - */
> -static long at32_wdt_ioctl(struct file *file,
> - unsigned int cmd, unsigned long arg)
> -{
> - int ret = -ENOTTY;
> - int time;
> - void __user *argp = (void __user *)arg;
> - int __user *p = argp;
> -
> - switch (cmd) {
> - case WDIOC_GETSUPPORT:
> - ret = copy_to_user(argp, &at32_wdt_info,
> - sizeof(at32_wdt_info)) ? -EFAULT : 0;
> - break;
> - case WDIOC_GETSTATUS:
> - ret = put_user(0, p);
> - break;
> - case WDIOC_GETBOOTSTATUS:
> - ret = put_user(wdt->boot_status, p);
> - break;
> - case WDIOC_SETOPTIONS:
> - ret = get_user(time, p);
> - if (ret)
> - break;
> - if (time & WDIOS_DISABLECARD)
> - at32_wdt_stop();
> - if (time & WDIOS_ENABLECARD)
> - at32_wdt_start();
> - ret = 0;
> - break;
> - case WDIOC_KEEPALIVE:
> - at32_wdt_pat();
> - ret = 0;
> - break;
> - case WDIOC_SETTIMEOUT:
> - ret = get_user(time, p);
> - if (ret)
> - break;
> - ret = at32_wdt_settimeout(time);
> - if (ret)
> - break;
> - /* Enable new time value */
> - at32_wdt_start();
> - /* fall through */
> - case WDIOC_GETTIMEOUT:
> - ret = put_user(wdt->timeout, p);
> - break;
> - }
> -
> - return ret;
> -}
> -
> -static ssize_t at32_wdt_write(struct file *file, const char __user *data,
> - size_t len, loff_t *ppos)
> -{
> - /* See if we got the magic character 'V' and reload the timer */
> - if (len) {
> - if (!nowayout) {
> - size_t i;
> -
> - /*
> - * note: just in case someone wrote the magic
> - * character five months ago...
> - */
> - expect_release = 0;
> -
> - /*
> - * scan to see whether or not we got the magic
> - * character
> - */
> - for (i = 0; i != len; i++) {
> - char c;
> - if (get_user(c, data + i))
> - return -EFAULT;
> - if (c == 'V')
> - expect_release = 42;
> - }
> - }
> - /* someone wrote to us, we should pat the watchdog */
> - at32_wdt_pat();
> - }
> - return len;
> -}
> -
> -static const struct file_operations at32_wdt_fops = {
> - .owner = THIS_MODULE,
> - .llseek = no_llseek,
> - .unlocked_ioctl = at32_wdt_ioctl,
> - .open = at32_wdt_open,
> - .release = at32_wdt_close,
> - .write = at32_wdt_write,
> -};
> -
> -static int __init at32_wdt_probe(struct platform_device *pdev)
> -{
> - struct resource *regs;
> - int ret;
> -
> - if (wdt) {
> - dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n");
> - return -EBUSY;
> - }
> -
> - regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - if (!regs) {
> - dev_dbg(&pdev->dev, "missing mmio resource\n");
> - return -ENXIO;
> - }
> -
> - wdt = devm_kzalloc(&pdev->dev, sizeof(struct wdt_at32ap700x),
> - GFP_KERNEL);
> - if (!wdt)
> - return -ENOMEM;
> -
> - wdt->regs = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
> - if (!wdt->regs) {
> - ret = -ENOMEM;
> - dev_dbg(&pdev->dev, "could not map I/O memory\n");
> - goto err_free;
> - }
> -
> - spin_lock_init(&wdt->io_lock);
> - wdt->boot_status = at32_wdt_get_status();
> -
> - /* Work-around for watchdog silicon errata. */
> - if (wdt->boot_status & WDIOF_CARDRESET) {
> - dev_info(&pdev->dev, "CPU must be reset with external "
> - "reset or POR due to silicon errata.\n");
> - ret = -EIO;
> - goto err_free;
> - } else {
> - wdt->users = 0;
> - }
> -
> - wdt->miscdev.minor = WATCHDOG_MINOR;
> - wdt->miscdev.name = "watchdog";
> - wdt->miscdev.fops = &at32_wdt_fops;
> - wdt->miscdev.parent = &pdev->dev;
> -
> - platform_set_drvdata(pdev, wdt);
> -
> - if (at32_wdt_settimeout(timeout)) {
> - at32_wdt_settimeout(TIMEOUT_DEFAULT);
> - dev_dbg(&pdev->dev,
> - "default timeout invalid, set to %d sec.\n",
> - TIMEOUT_DEFAULT);
> - }
> -
> - ret = misc_register(&wdt->miscdev);
> - if (ret) {
> - dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
> - goto err_free;
> - }
> -
> - dev_info(&pdev->dev,
> - "AT32AP700X WDT at 0x%p, timeout %d sec (nowayout=%d)\n",
> - wdt->regs, wdt->timeout, nowayout);
> -
> - return 0;
> -
> -err_free:
> - wdt = NULL;
> - return ret;
> -}
> -
> -static int __exit at32_wdt_remove(struct platform_device *pdev)
> -{
> - if (wdt && platform_get_drvdata(pdev) == wdt) {
> - /* Stop the timer before we leave */
> - if (!nowayout)
> - at32_wdt_stop();
> -
> - misc_deregister(&wdt->miscdev);
> - wdt = NULL;
> - }
> - return 0;
> -}
> -
> -static void at32_wdt_shutdown(struct platform_device *pdev)
> -{
> - at32_wdt_stop();
> -}
> -
> -#ifdef CONFIG_PM
> -static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t
> message)
> -{
> - at32_wdt_stop();
> - return 0;
> -}
> -
> -static int at32_wdt_resume(struct platform_device *pdev)
> -{
> - if (wdt->users)
> - at32_wdt_start();
> - return 0;
> -}
> -#else
> -#define at32_wdt_suspend NULL
> -#define at32_wdt_resume NULL
> -#endif
> -
> -/* work with hotplug and coldplug */
> -MODULE_ALIAS("platform:at32_wdt");
> -
> -static struct platform_driver at32_wdt_driver = {
> - .remove = __exit_p(at32_wdt_remove),
> - .suspend = at32_wdt_suspend,
> - .resume = at32_wdt_resume,
> - .driver = {
> - .name = "at32_wdt",
> - },
> - .shutdown = at32_wdt_shutdown,
> -};
> -
> -module_platform_driver_probe(at32_wdt_driver, at32_wdt_probe);
> -
> -MODULE_AUTHOR("Hans-Christian Egtvedt <egtv...@samfundet.no>");
> -MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
> -MODULE_LICENSE("GPL");
> --
> 2.13.6
>
