Around Fri 19 Jan 2018 09:17:45 +0100 or thereabout, Corentin Labbe wrote: > Since AVR32 arch is gone, atmel-wm97xx driver is useless. > Remove it.
In theory it could have been rewritten to work with AT91 devices, but I would recommend starting from scratch. This driver is from the platform data era, and IIRC a bit hard coded to work on AVR32 hardware variant of the AC97C peripheral. > Signed-off-by: Corentin Labbe <[email protected]> > Acked-by: Hans-Christian Noren Egtvedt <[email protected]> > --- > drivers/input/touchscreen/Kconfig | 15 -- > drivers/input/touchscreen/Makefile | 1 - > drivers/input/touchscreen/atmel-wm97xx.c | 436 > ------------------------------- > 3 files changed, 452 deletions(-) > delete mode 100644 drivers/input/touchscreen/atmel-wm97xx.c > > diff --git a/drivers/input/touchscreen/Kconfig > b/drivers/input/touchscreen/Kconfig > index 38a226f9fcbd..4f15496fec8b 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -795,21 +795,6 @@ config TOUCHSCREEN_WM9713 > Say Y here to enable support for the Wolfson Microelectronics > WM9713 touchscreen controller. > > -config TOUCHSCREEN_WM97XX_ATMEL > - tristate "WM97xx Atmel accelerated touch" > - depends on TOUCHSCREEN_WM97XX && AVR32 > - help > - Say Y here for support for streaming mode with WM97xx touchscreens > - on Atmel AT91 or AVR32 systems with an AC97C module. > - > - Be aware that this will use channel B in the controller for > - streaming data, this must not conflict with other AC97C drivers. > - > - If unsure, say N. > - > - To compile this driver as a module, choose M here: the module will > - be called atmel-wm97xx. > - > config TOUCHSCREEN_WM97XX_MAINSTONE > tristate "WM97xx Mainstone/Palm accelerated touch" > depends on TOUCHSCREEN_WM97XX && ARCH_PXA > diff --git a/drivers/input/touchscreen/Makefile > b/drivers/input/touchscreen/Makefile > index d2a2b3b7af27..dddae7973436 100644 > --- a/drivers/input/touchscreen/Makefile > +++ b/drivers/input/touchscreen/Makefile > @@ -97,7 +97,6 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o > wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o > wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712) += wm9712.o > wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713) += wm9713.o > -obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL) += atmel-wm97xx.o > obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o > obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o > obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o <snipp diff> -- mvh Hans-Christian Noren Egtvedt
