Implement Fintek F81232 break on/off with LCR register.
It's the same with 16550A LCR register layout.
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_ker...@gmail.com>
---
drivers/usb/serial/f81232.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index dadf024ae494..a054f69446fd 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -377,13 +377,18 @@ static void f81232_process_read_urb(struct urb *urb)
static void f81232_break_ctl(struct tty_struct *tty, int break_state)
{
- /* FIXME - Stubbed out for now */
+ struct usb_serial_port *port = tty->driver_data;
+ struct f81232_private *priv = usb_get_serial_port_data(port);
+ int status;
- /*
- * break_state = -1 to turn on break, and 0 to turn off break
- * see drivers/char/tty_io.c to see it used.
- * last_set_data_urb_value NEVER has the break bit set in it.
- */
+ mutex_lock(&priv->lock);
+
+ status = f81232_set_mask_register(port, LINE_CONTROL_REGISTER,
+ UART_LCR_SBC, !!break_state);
+ if (status)
+ dev_err(&port->dev, "set break failed: %d\n", status);
+
+ mutex_unlock(&priv->lock);
}
static int f81232_find_clk(speed_t baudrate)
--
2.7.4
