Signed-off-by: Rasmus Villemoes <rasmus.villem...@prevas.dk>
---
.../interrupt-controller/fsl,ls-extirq.txt | 44 ++++++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644
Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
diff --git
a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
new file mode 100644
index 000000000000..a71ce2c3eeae
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
@@ -0,0 +1,44 @@
+* Freescale Layerscape external IRQs
+
+Some Layerscape SOCs (LS1021A, LS1043A, LS1046A) support inverting
+the polarity of certain external interrupt lines.
+
+The device node must be a child of the node representing the
+Supplemental Configuration Unit (SCFG).
+
+Required properties:
+- compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells: Use the same format as specified by GIC in arm,gic.txt.
+- interrupt-parent: phandle of GIC.
+- offset: offset to the Interrupt Polarity Control Register (INTPCR)
+ register in the SCFG.
+- interrupts: Specifies the mapping to interrupt numbers in the parent
+ interrupt controller. Interrupts are mapped one-to-one to parent
+ interrupts.
+
+Optional properties:
+- fsl,bit-reverse: This boolean property should be set on the LS1021A
+ if the SCFGREVCR register has been set to all-ones (which is usually
+ the case), meaning that all reads and writes of SCFG registers are
+ implicitly bit-reversed. Other compatible platforms do not have such
+ a register.
+
+Example:
+ scfg: scfg@1570000 {
+ compatible = "fsl,ls1021a-scfg", "syscon";
+ ...
+ extirq: interrupt-controller {
+ compatible = "fsl,ls1021a-extirq";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ offset = <0x1ac>;
+ interrupts = <163 164 165 167 168 169>;
+ fsl,bit-reverse;
+ };
+ };
+
+
+ interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <&extirq GIC_SPI 1 IRQ_TYPE_LEVEL_LOW>;
--
2.15.1
