On Mon, May 21 2007, Jens Axboe wrote:
> On Fri, May 18 2007, Badari Pulavarty wrote:
> > On Fri, 2007-05-18 at 09:35 +0200, Jens Axboe wrote:
> > > On Thu, May 17 2007, Badari Pulavarty wrote:
> > > > On Thu, 2007-05-17 at 08:27 +0200, Jens Axboe wrote:
> > > > > On Wed, May 16 2007, Badari Pulavarty wrote:
> > > > > > On Tue, 2007-05-15 at 19:50 +0200, Jens Axboe wrote:
> > > > > > > On Tue, May 15 2007, Badari Pulavarty wrote:
> > > > > > > > On Tue, 2007-05-15 at 19:20 +0200, Jens Axboe wrote:
> > > > > > > > > On Tue, May 15 2007, Badari Pulavarty wrote:
> > > > > > > > > > On Fri, 2007-05-11 at 15:51 +0200, Jens Axboe wrote:
> > > > > > > > > > > Hi,
> > > > > > > > > > >
> > > > > > > > > > > Updated version of the patch - this time I'll just attach
> > > > > > > > > > > the patch
> > > > > > > > > > > file...
> > > > > > > > > >
> > > > > > > > > > Missing scatterlist.h inclusions..
> > > > > > > > > >
> > > > > > > > > > drivers/scsi/sym53c8xx_2/sym_glue.c: In function
> > > > > > > > > > ???sym_scatter???:
> > > > > > > > > > drivers/scsi/sym53c8xx_2/sym_glue.c:385: warning: implicit
> > > > > > > > > > declaration
> > > > > > > > > > of function ???for_each_sg???
> > > > > > > > > > drivers/scsi/sym53c8xx_2/sym_glue.c:385: error: expected
> > > > > > > > > > ???;??? before ???{???
> > > > > > > > > > token
> > > > > > > > > > drivers/scsi/sym53c8xx_2/sym_glue.c:375: warning: unused
> > > > > > > > > > variable ???tp???
> > > > > > > > > > make[3]: *** [drivers/scsi/sym53c8xx_2/sym_glue.o] Error 1
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > drivers/scsi/qla2xxx/qla_iocb.c: In function
> > > > > > > > > > ???qla24xx_build_scsi_iocbs???:
> > > > > > > > > > drivers/scsi/qla2xxx/qla_iocb.c:678: warning: implicit
> > > > > > > > > > declaration of
> > > > > > > > > > function ???for_each_sg???
> > > > > > > > > > drivers/scsi/qla2xxx/qla_iocb.c:678: error: expected
> > > > > > > > > > ???;??? before ???{???
> > > > > > > > > > token
> > > > > > > > >
> > > > > > > > > Thanks, will fix those. What arch? I tested it here.
> > > > > > > >
> > > > > > > > I am playing with them on ppc64.
> > > > > > >
> > > > > > > Ah ok, you need the updated patch series for ppc64 support.
> > > > > > > Builds fine
> > > > > > > here on ppc64. See the #sglist branch of the block repo:
> > > > > > >
> > > > > > > git://git.kernel.dk/data/git/linux-2.6-block.git
> > > > > > >
> > > > > > > I can mail you an updated patch, if you want.
> > > > > >
> > > > > >
> > > > > > Here is the whole panic stack..
> > > > >
> > > > > Thanks will fix that up, the IDE part is totally untested. Can you try
> > > > > and backout this patch and see if it boots?
> > > >
> > > > I increased max_segments to 1024 on my qla2200 attached disks and
> > > > simple "dd" (direct read) resulted in following:
> > > >
> > > > elm3b29:/sys/block/sdd/queue # echo 1024 > max_segments
> > > > elm3b29:/sys/block/sdd/queue # cat max_hw_sectors_kb > max_sectors_kb
> > > > elm3b29:/mnt # dd iflag=direct if=./z of=/dev/null bs=512M
> > > >
> > > > Unable to handle kernel paging request at 0000000000001008 RIP:
> > > > [<ffffffff8025e7af>] __rmqueue+0x6f/0x120
> > >
> > > Auch, that's a bug. I don't think the oom path has been tested yet,
> > > perhaps this is hitting it.
> > >
> > > Can you try with this debug patch, plus enable the slab debugging
> > > helpers (like poisoning)?
> > >
> > > diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> > > index 7456992..a479d1e 100644
> > > --- a/drivers/scsi/scsi_lib.c
> > > +++ b/drivers/scsi/scsi_lib.c
> > > @@ -793,6 +793,7 @@ struct scatterlist *scsi_alloc_sgtable(struct
> > > scsi_cmnd *cmd, gfp_t gfp_mask)
> > > return ret;
> > > enomem:
> > > if (ret) {
> > > + printk(KERN_ERR "scsi: failed to allocate sg table\n");
> > > /*
> > > * Free entries chained off ret. Since we were trying to
> > > * allocate another sglist, we know that all entries are of
> > >
> >
> > Not much help. I get all kinds of weird panics.. This time I got (with
> > the above debug).
> >
> > general protection fault: 0000 [1] SMP
> > CPU 1
> > Modules linked in: jfs sg sd_mod qla2xxx firmware_class
> > scsi_transport_fc scsi_mod vfat fat ipv6 thermal processor fan button
> > battery ac dm_mod floppy parport_pc lp parport
> > Pid: 56, comm: kblockd/1 Not tainted 2.6.22-rc1-sg #8
> > RIP: 0010:[<ffffffff802816b6>] [<ffffffff802816b6>] kmem_cache_alloc
> > +0x36/0x70
> > RSP: 0018:ffff81017abbfc10 EFLAGS: 00010002
> > RAX: 0000000000000000 RBX: 0000000000000082 RCX: 0600000000000064
> > RDX: ffff81019ff2b8a0 RSI: 0000000000011220 RDI: ffffffff8068d120
> > RBP: ffff81017abbfc20 R08: 00000000000039f8 R09: 0000000000000000
> > R10: ffff81019cbee700 R11: 0000000000000188 R12: ffff8101df2a64e0
> > R13: 0000000000011220 R14: ffff8101df2a6510 R15: ffff81017abbfc50
> > FS: 00002b505b027f20(0000) GS:ffff81018021f300(0000)
> > knlGS:00000000f7da26b0
> > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> > CR2: 00002b505b029008 CR3: 000000019af73000 CR4: 00000000000006e0
> > Process kblockd/1 (pid: 56, threadinfo ffff81017abbe000, task
> > ffff81017a571440)
> > Stack: 000000007abbfc30 0000000000000000 ffff81017abbfc30
> > ffffffff8025d001
> > ffff81017abbfcb0 ffffffff8025d122 ffff81017abbfc60 ffffffff80219dc0
> > ffffffff880e5da6 00000000000000ad ffff81017abbfcd0 ffffffff8021a366
> > Call Trace:
> > [<ffffffff8025d001>] mempool_alloc_slab+0x11/0x20
> > [<ffffffff8025d122>] mempool_alloc+0x42/0x110
> > [<ffffffff80219dc0>] flush_gart+0x40/0x50
> > [<ffffffff880e5da6>] :scsi_mod:__scsi_get_command+0x26/0x90
> > [<ffffffff8021a366>] gart_map_sg+0x2d6/0x3e0
>
> Smells like a bug in the gart modifications, I'll double check them.
> Does it work if you boot with iommu=off?
If iommu=off works, can you try a normal boot but with this applied on
top of the sglist patches? That should fix gart mapping.
diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c
index 2e22a3a..b16384f 100644
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86_64/kernel/pci-gart.c
@@ -381,7 +381,7 @@ int gart_map_sg(struct device *dev, struct scatterlist *sg,
int nents, int dir)
int start;
unsigned long pages = 0;
int need = 0, nextneed;
- struct scatterlist *s, *ps, *start_sg;
+ struct scatterlist *s, *ps, *start_sg, *sgmap;
if (nents == 0)
return 0;
@@ -391,7 +391,7 @@ int gart_map_sg(struct device *dev, struct scatterlist *sg,
int nents, int dir)
out = 0;
start = 0;
- start_sg = sg;
+ start_sg = sgmap = sg;
ps = NULL; /* shut up gcc */
for_each_sg(sg, s, nents, i) {
dma_addr_t addr = page_to_phys(s->page) + s->offset;
@@ -405,11 +405,12 @@ int gart_map_sg(struct device *dev, struct scatterlist
*sg, int nents, int dir)
/* Can only merge when the last chunk ends on a page
boundary and the new one doesn't have an offset. */
if (!iommu_merge || !nextneed || !need || s->offset ||
- (ps->offset + ps->length) % PAGE_SIZE) {
- if (dma_map_cont(start_sg, i - start, sg+out,
+ (ps->offset + ps->length) % PAGE_SIZE) {
+ if (dma_map_cont(start_sg, i - start, sgmap,
pages, need) < 0)
goto error;
out++;
+ sgmap = sg_next(sgmap);
pages = 0;
start = i;
start_sg = s;
@@ -420,7 +421,7 @@ int gart_map_sg(struct device *dev, struct scatterlist *sg,
int nents, int dir)
pages += to_pages(s->offset, s->length);
ps = s;
}
- if (dma_map_cont(start_sg, i - start, sg+out, pages, need) < 0)
+ if (dma_map_cont(start_sg, i - start, sgmap, pages, need) < 0)
goto error;
out++;
flush_gart();
--
Jens Axboe
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
