From: Stephen Boyd <sb...@codeaurora.org>

Register a cpufreq-generic device whenever we detect that a
"qcom,krait" compatible CPU is present in DT.

Cc: <devicet...@vger.kernel.org>
[Sricharan: updated to use dev_pm_opp_set_prop_name, NVMEM apis,
            new binding]
Signed-off-by: Sricharan R <sricha...@codeaurora.org>
Signed-off-by: Stephen Boyd <sb...@codeaurora.org>
---
 drivers/cpufreq/Kconfig.arm          |  10 +++
 drivers/cpufreq/Makefile             |   1 +
 drivers/cpufreq/cpufreq-dt-platdev.c |   5 ++
 drivers/cpufreq/qcom-cpufreq.c       | 161 +++++++++++++++++++++++++++++++++++
 4 files changed, 177 insertions(+)
 create mode 100644 drivers/cpufreq/qcom-cpufreq.c

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index bdce448..076d039 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -100,6 +100,16 @@ config ARM_OMAP2PLUS_CPUFREQ
        depends on ARCH_OMAP2PLUS
        default ARCH_OMAP2PLUS
 
+config ARM_QCOM_CPUFREQ
+       bool "CPUfreq driver for the QCOM SoCs with KRAIT processors"
+       depends on ARCH_QCOM
+       select PM_OPP
+       help
+         This enables the CPUFreq driver for Qualcomm SoCs with
+         KRAIT processors.
+
+         If in doubt, say N.
+
 config ARM_S3C_CPUFREQ
        bool
        help
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 812f9e0..1496464 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ)    += mediatek-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)    += omap-cpufreq.o
 obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)       += pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)                   += pxa3xx-cpufreq.o
+obj-$(CONFIG_ARM_QCOM_CPUFREQ)         += qcom-cpufreq.o
 obj-$(CONFIG_ARM_S3C24XX_CPUFREQ)      += s3c24xx-cpufreq.o
 obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
 obj-$(CONFIG_ARM_S3C2410_CPUFREQ)      += s3c2410-cpufreq.o
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c 
b/drivers/cpufreq/cpufreq-dt-platdev.c
index ecc56e2..8a55a85 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -119,6 +119,11 @@
        { .compatible = "ti,am43", },
        { .compatible = "ti,dra7", },
 
+       { .compatible = "qcom,ipq8064", },
+       { .compatible = "qcom,apq8064", },
+       { .compatible = "qcom,msm8974", },
+       { .compatible = "qcom,msm8960", },
+
        { }
 };
 
diff --git a/drivers/cpufreq/qcom-cpufreq.c b/drivers/cpufreq/qcom-cpufreq.c
new file mode 100644
index 0000000..5b988d4
--- /dev/null
+++ b/drivers/cpufreq/qcom-cpufreq.c
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include <linux/cpu.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+#include "cpufreq-dt.h"
+#include <linux/nvmem-consumer.h>
+
+static void __init get_krait_bin_format_a(int *speed, int *pvs, int *pvs_ver,
+                                         struct nvmem_cell *pvs_nvmem, u8 *buf)
+{
+       u32 pte_efuse;
+
+       pte_efuse = *((u32 *)buf);
+
+       *speed = pte_efuse & 0xf;
+       if (*speed == 0xf)
+               *speed = (pte_efuse >> 4) & 0xf;
+
+       if (*speed == 0xf) {
+               *speed = 0;
+               pr_warn("Speed bin: Defaulting to %d\n", *speed);
+       } else {
+               pr_info("Speed bin: %d\n", *speed);
+       }
+
+       *pvs = (pte_efuse >> 10) & 0x7;
+       if (*pvs == 0x7)
+               *pvs = (pte_efuse >> 13) & 0x7;
+
+       if (*pvs == 0x7) {
+               *pvs = 0;
+               pr_warn("PVS bin: Defaulting to %d\n", *pvs);
+       } else {
+               pr_info("PVS bin: %d\n", *pvs);
+       }
+
+       kfree(buf);
+}
+
+static void __init get_krait_bin_format_b(int *speed, int *pvs, int *pvs_ver,
+                                         struct nvmem_cell *pvs_nvmem, u8 *buf)
+{
+       u32 pte_efuse, redundant_sel;
+
+       pte_efuse = *((u32 *)buf);
+       redundant_sel = (pte_efuse >> 24) & 0x7;
+       *speed = pte_efuse & 0x7;
+
+       /* 4 bits of PVS are in efuse register bits 31, 8-6. */
+       *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
+       *pvs_ver = (pte_efuse >> 4) & 0x3;
+
+       switch (redundant_sel) {
+       case 1:
+               *speed = (pte_efuse >> 27) & 0xf;
+               break;
+       case 2:
+               *pvs = (pte_efuse >> 27) & 0xf;
+               break;
+       }
+
+       /* Check SPEED_BIN_BLOW_STATUS */
+       if (pte_efuse & BIT(3)) {
+               pr_info("Speed bin: %d\n", *speed);
+       } else {
+               pr_warn("Speed bin not set. Defaulting to 0!\n");
+               *speed = 0;
+       }
+
+       /* Check PVS_BLOW_STATUS */
+       pte_efuse = *(((u32 *)buf) + 4);
+       if (pte_efuse) {
+               pr_info("PVS bin: %d\n", *pvs);
+       } else {
+               pr_warn("PVS bin not set. Defaulting to 0!\n");
+               *pvs = 0;
+       }
+
+       pr_info("PVS version: %d\n", *pvs_ver);
+       kfree(buf);
+}
+
+static int __init qcom_cpufreq_populate_opps(struct nvmem_cell *pvs_nvmem)
+{
+       int speed = 0, pvs = 0, pvs_ver = 0, cpu;
+       struct device *dev;
+       u8 *buf;
+       size_t len;
+       char pvs_name[] = "speedXX-pvsXX-vXX";
+
+       buf = nvmem_cell_read(pvs_nvmem, &len);
+       if (len == 4)
+               get_krait_bin_format_a(&speed, &pvs, &pvs_ver, pvs_nvmem, buf);
+       else if (len == 8)
+               get_krait_bin_format_b(&speed, &pvs, &pvs_ver, pvs_nvmem, buf);
+       else
+               pr_warn("Unable to read nvmem data. Defaulting to 0!\n");
+
+       snprintf(pvs_name, sizeof(pvs_name), "speed%d-pvs%d-v%d",
+                speed, pvs, pvs_ver);
+
+       for (cpu = 0; cpu < num_possible_cpus(); cpu++) {
+               dev = get_cpu_device(cpu);
+               if (!dev)
+                       return -ENODEV;
+
+               if (IS_ERR(dev_pm_opp_set_prop_name(dev, pvs_name)))
+                       pr_warn("failed to add OPP name %s\n", pvs_name);
+       }
+
+       return 0;
+}
+
+static int __init qcom_cpufreq_driver_init(void)
+{
+       struct device *cpu_dev;
+       struct device_node *np;
+       struct nvmem_cell *pvs_nvmem;
+       int ret;
+
+       cpu_dev = get_cpu_device(0);
+       if (!cpu_dev)
+               return -ENODEV;
+
+       np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
+       if (!np)
+               return -ENOENT;
+
+       if (!of_device_is_compatible(np, "operating-points-v2-krait-cpu")) {
+               of_node_put(np);
+               return -ENODEV;
+       }
+
+       pvs_nvmem = of_nvmem_cell_get(np, NULL);
+       if (IS_ERR(pvs_nvmem)) {
+               dev_err(cpu_dev, "Could not get nvmem cell\n");
+               return PTR_ERR(pvs_nvmem);
+       }
+
+       of_node_put(np);
+
+       ret = qcom_cpufreq_populate_opps(pvs_nvmem);
+       if (ret)
+               return ret;
+
+       return PTR_ERR(platform_device_register_simple("cpufreq-dt",
+                                                      -1, NULL, 0));
+}
+module_init(qcom_cpufreq_driver_init);
+
+MODULE_DESCRIPTION("Qualcomm CPUfreq driver");
+MODULE_LICENSE("GPL v2");
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of 
Code Aurora Forum, hosted by The Linux Foundation

Reply via email to