ST Multi-Function eXpander (MFX) is a slave controller using I2C
for communication with the main MCU. Main features are:
- 16 fast GPIOs individually configurable in input/output
- 8 alternate GPIOs individually configurable in input/output
- Main MCU IDD measurement
- Resistive touchscreen controller
Only GPIO expander (16 fast GPIOs + 8 alternate) feature is
supported for the moment.
Signed-off-by: Amelie Delaunay <amelie.delau...@st.com>
---
drivers/mfd/Kconfig | 15 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/st-mfx.c | 526 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/st-mfx.h | 116 ++++++++++
4 files changed, 658 insertions(+)
create mode 100644 drivers/mfd/st-mfx.c
create mode 100644 include/linux/mfd/st-mfx.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1d20a80..e78e818 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1823,6 +1823,21 @@ config MFD_STM32_TIMERS
for PWM and IIO Timer. This driver allow to share the
registers between the others drivers.
+config MFD_ST_MFX
+ bool "STMicroelectronics MFX"
+ depends on I2C
+ depends on OF || COMPILE_TEST
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Support for the STMicroelectronics Multi-Function eXpander.
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device. Currently available sub drivers are:
+
+ GPIO: mfx-gpio
+
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index d9474ad..1379a18 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -230,3 +230,4 @@ obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o
obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o
obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o
obj-$(CONFIG_MFD_SC27XX_PMIC) += sprd-sc27xx-spi.o
+obj-$(CONFIG_MFD_ST_MFX) += st-mfx.o
diff --git a/drivers/mfd/st-mfx.c b/drivers/mfd/st-mfx.c
new file mode 100644
index 0000000..5bee5d3
--- /dev/null
+++ b/drivers/mfd/st-mfx.c
@@ -0,0 +1,526 @@
+/*
+ * STMicroelectronics Multi-Function eXpander (ST-MFX) Core Driver
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Amelie Delaunay <amelie.delau...@st.com> for STMicroelectronics.
+ *
+ * License terms: GPL V2.0.
+ *
+ * st-mfx Core Driver is free software; you can redistribute it and/or modify
it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * st-mfx Core Driver is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * st-mfx Core Driver. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/bitfield.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/st-mfx.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+
+/**
+ * struct mfx_priv - MFX MFD private structure
+ * @dev: device, mostly for logs
+ * @regmap: register map
+ * @mfx: MFX MFD public structure, to share information with subdrivers
+ * @irq_domain: IRQ domain
+ * @irq: IRQ number for mfx
+ * @irq_lock: IRQ bus lock
+ * @irqen: cache of IRQ_SRC_EN register for bus_lock
+ * @oldirqen: cache of IRQ_SRC_EN register for bus_lock
+ */
+struct mfx_priv {
+ struct device *dev;
+ struct regmap *regmap;
+ struct mfx mfx;
+ struct irq_domain *irq_domain;
+ int irq;
+ struct mutex irq_lock; /* IRQ bus lock */
+ u8 irqen;
+ u8 oldirqen;
+};
+
+#define to_mfx_priv(_mfx) container_of(_mfx, struct mfx_priv, mfx)
+
+/* MFX boot time is around 10ms, so after reset, we have to wait this delay */
+#define MFX_BOOT_TIME 10
+
+static u8 mfx_blocks_to_mask(u32 blocks)
+{
+ u8 mask = 0;
+
+ if (blocks & MFX_BLOCK_GPIO)
+ mask |= MFX_REG_SYS_CTRL_GPIO_EN;
+ else
+ mask &= ~MFX_REG_SYS_CTRL_GPIO_EN;
+
+ if (blocks & MFX_BLOCK_TS)
+ mask |= MFX_REG_SYS_CTRL_TS_EN;
+ else
+ mask &= ~MFX_REG_SYS_CTRL_TS_EN;
+
+ if (blocks & MFX_BLOCK_IDD)
+ mask |= MFX_REG_SYS_CTRL_IDD_EN;
+ else
+ mask &= ~MFX_REG_SYS_CTRL_IDD_EN;
+
+ if (blocks & MFX_BLOCK_ALTGPIO)
+ mask |= MFX_REG_SYS_CTRL_ALTGPIO_EN;
+ else
+ mask &= ~MFX_REG_SYS_CTRL_ALTGPIO_EN;
+
+ return mask;
+}
+
+static int mfx_reset(struct mfx *mfx)
+{
+ struct mfx_priv *mfx_priv = to_mfx_priv(mfx);
+ int ret;
+
+ ret = regmap_update_bits(mfx_priv->regmap, MFX_REG_SYS_CTRL,
+ MFX_REG_SYS_CTRL_SWRST,
+ MFX_REG_SYS_CTRL_SWRST);
+
+ if (ret < 0)
+ return ret;
+
+ msleep(MFX_BOOT_TIME);
+
+ return ret;
+}
+
+int mfx_block_read(struct mfx *mfx, u8 reg, u8 length, u8 *values)
+{
+ struct mfx_priv *mfx_priv = to_mfx_priv(mfx);
+
+ return regmap_bulk_read(mfx_priv->regmap, reg, values, length);
+}
+EXPORT_SYMBOL_GPL(mfx_block_read);
+
+int mfx_block_write(struct mfx *mfx, u8 reg, u8 length, const u8 *values)
+{
+ struct mfx_priv *mfx_priv = to_mfx_priv(mfx);
+
+ return regmap_bulk_write(mfx_priv->regmap, reg, values, length);
+}
+EXPORT_SYMBOL_GPL(mfx_block_write);
+
+int mfx_reg_read(struct mfx *mfx, u8 reg)
+{
+ struct mfx_priv *mfx_priv = to_mfx_priv(mfx);
+ u32 val;
+ int ret;
+
+ ret = regmap_read(mfx_priv->regmap, reg, &val);
+
+ return ret ? ret : val;
+}
+EXPORT_SYMBOL_GPL(mfx_reg_read);
+
+int mfx_reg_write(struct mfx *mfx, u8 reg, u8 val)
+{
+ struct mfx_priv *mfx_priv = to_mfx_priv(mfx);
+
+ return regmap_write(mfx_priv->regmap, reg, val);
+}
+EXPORT_SYMBOL_GPL(mfx_reg_write);
+
+int mfx_set_bits(struct mfx *mfx, u8 reg, u8 mask, u8 val)
+{
+ struct mfx_priv *mfx_priv = to_mfx_priv(mfx);
+
+ return regmap_update_bits(mfx_priv->regmap, reg, mask, val);
+}
+EXPORT_SYMBOL_GPL(mfx_set_bits);
+
+int mfx_enable(struct mfx *mfx, u32 blocks)
+{
+ struct mfx_priv *mfx_priv = to_mfx_priv(mfx);
+ u8 mask = mfx_blocks_to_mask(blocks);
+
+ return regmap_update_bits(mfx_priv->regmap, MFX_REG_SYS_CTRL,
+ mask, mask);
+}
+EXPORT_SYMBOL_GPL(mfx_enable);
+
+int mfx_disable(struct mfx *mfx, u32 blocks)
+{
+ struct mfx_priv *mfx_priv = to_mfx_priv(mfx);
+ u8 mask = mfx_blocks_to_mask(blocks);
+
+ return regmap_update_bits(mfx_priv->regmap, MFX_REG_SYS_CTRL,
+ mask, 0);
+}
+EXPORT_SYMBOL_GPL(mfx_disable);
+
+static void mfx_irq_lock(struct irq_data *data)
+{
+ struct mfx_priv *mfx_priv = irq_data_get_irq_chip_data(data);
+
+ mutex_lock(&mfx_priv->irq_lock);
+}
+
+static void mfx_irq_sync_unlock(struct irq_data *data)
+{
+ struct mfx_priv *mfx_priv = irq_data_get_irq_chip_data(data);
+ u8 new = mfx_priv->irqen;
+ u8 old = mfx_priv->oldirqen;
+
+ if (new == old)
+ goto unlock;
+
+ mfx_priv->oldirqen = new;
+ mfx_reg_write(&mfx_priv->mfx, MFX_REG_IRQ_SRC_EN, new);
+unlock:
+ mutex_unlock(&mfx_priv->irq_lock);
+}
+
+static void mfx_irq_mask(struct irq_data *data)
+{
+ struct mfx_priv *mfx_priv = irq_data_get_irq_chip_data(data);
+
+ mfx_priv->irqen &= ~BIT(data->hwirq % 8);
+}
+
+static void mfx_irq_unmask(struct irq_data *data)
+{
+ struct mfx_priv *mfx_priv = irq_data_get_irq_chip_data(data);
+
+ mfx_priv->irqen |= BIT(data->hwirq % 8);
+}
+
+static struct irq_chip mfx_irq_chip = {
+ .name = "mfx",
+ .irq_bus_lock = mfx_irq_lock,
+ .irq_bus_sync_unlock = mfx_irq_sync_unlock,
+ .irq_mask = mfx_irq_mask,
+ .irq_unmask = mfx_irq_unmask,
+};
+
+static irqreturn_t mfx_irq(int irq, void *data)
+{
+ struct mfx_priv *mfx_priv = data;
+ unsigned long status, bit;
+ u8 ack;
+ int ret;
+
+ ret = mfx_reg_read(&mfx_priv->mfx, MFX_REG_IRQ_PENDING);
+ if (ret < 0) {
+ dev_err(mfx_priv->dev, "can't get IRQ_PENDING: %d\n", ret);
+ return IRQ_NONE;
+ }
+
+ /* It can be GPIO, IDD, ERROR, TS* IRQs */
+ status = ret & mfx_priv->irqen;
+
+ /*
+ * There is no ACK for GPIO, MFX_REG_IRQ_PENDING_GPIO is a logical OR
+ * of MFX_REG_IRQ_GPI _PENDING1/_PENDING2/_PENDING3
+ */
+ ack = status & ~MFX_REG_IRQ_PENDING_GPIO;
+
+ for_each_set_bit(bit, &status, 8)
+ handle_nested_irq(irq_find_mapping(mfx_priv->irq_domain, bit));
+
+ if (ack)
+ mfx_reg_write(&mfx_priv->mfx, MFX_REG_IRQ_ACK, ack);
+
+ return IRQ_HANDLED;
+}
+
+static int mfx_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ struct mfx_priv *mfx_priv = d->host_data;
+
+ irq_set_chip_data(virq, mfx_priv);
+ irq_set_chip(virq, &mfx_irq_chip);
+ irq_set_nested_thread(virq, 1);
+ irq_set_parent(virq, mfx_priv->irq);
+ irq_set_noprobe(virq);
+
+ return 0;
+}
+
+static void mfx_irq_unmap(struct irq_domain *d, unsigned int virq)
+{
+ irq_set_chip_and_handler(virq, NULL, NULL);
+ irq_set_chip_data(virq, NULL);
+}
+
+static const struct irq_domain_ops mfx_irq_ops = {
+ .map = mfx_irq_map,
+ .unmap = mfx_irq_unmap,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int mfx_irq_init(struct mfx_priv *mfx_priv, struct device_node *np)
+{
+ int irqoutpin = MFX_REG_IRQ_OUT_PIN_TYPE; /* Push-Pull */
+ int irqtrigger, ret;
+
+ mfx_priv->irq = of_irq_get(np, 0);
+ if (mfx_priv->irq > 0) {
+ irqtrigger = irq_get_trigger_type(mfx_priv->irq);
+ } else {
+ dev_err(mfx_priv->dev, "failed to get irq: %d\n",
+ mfx_priv->irq);
+ return mfx_priv->irq;
+ }
+
+ if ((irqtrigger & IRQ_TYPE_EDGE_FALLING) ||
+ (irqtrigger & IRQ_TYPE_LEVEL_LOW))
+ irqoutpin &= ~MFX_REG_IRQ_OUT_PIN_POL; /* Active Low */
+ else
+ irqoutpin |= MFX_REG_IRQ_OUT_PIN_POL; /* Active High */
+
+ mfx_reg_write(&mfx_priv->mfx, MFX_REG_IRQ_OUT_PIN, irqoutpin);
+
+ mfx_priv->irq_domain = irq_domain_add_linear(np, MFX_IRQ_SRC_NR,
+ &mfx_irq_ops, mfx_priv);
+ if (!mfx_priv->irq_domain) {
+ dev_err(mfx_priv->dev, "failed to create irq domain\n");
+ return -ENOMEM;
+ }
+
+ ret = devm_request_threaded_irq(mfx_priv->dev, mfx_priv->irq,
+ NULL, mfx_irq,
+ irqtrigger | IRQF_ONESHOT, "mfx",
+ mfx_priv);
+ if (ret) {
+ dev_err(mfx_priv->dev, "failed to request irq: %d\n", ret);
+ irq_domain_remove(mfx_priv->irq_domain);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void mfx_irq_remove(struct mfx_priv *mfx_priv)
+{
+ int hwirq;
+
+ for (hwirq = 0; hwirq < MFX_IRQ_SRC_NR; hwirq++)
+ irq_dispose_mapping(irq_find_mapping(mfx_priv->irq_domain,
+ hwirq));
+ irq_domain_remove(mfx_priv->irq_domain);
+}
+
+static int mfx_chip_init(struct mfx_priv *mfx_priv, u16 i2c_addr)
+{
+ struct mfx *mfx = &mfx_priv->mfx;
+ int ret;
+ int id;
+ u8 version[2];
+
+ id = mfx_reg_read(mfx, MFX_REG_CHIP_ID);
+ if (id < 0) {
+ dev_err(mfx_priv->dev, "error reading chip id: %d\n", id);
+ return id;
+ }
+
+ ret = mfx_block_read(mfx, MFX_REG_FW_VERSION_MSB,
+ ARRAY_SIZE(version), version);
+ if (ret < 0) {
+ dev_err(mfx_priv->dev, "error reading fw version: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * Check that ID is the complement of the I2C address:
+ * MFX I2C address follows the 7-bit format (MSB), that's why
+ * i2c_addr is shifted.
+ *
+ * MFX_I2C_ADDR | MFX | Linux
+ * input pin | I2C device address | I2C device address
+ *--------------------------------------------------------
+ * 0 | b: 1000 010x h:0x84 | 0x42
+ * 1 | b: 1000 011x h:0x86 | 0x43
+ */
+ if (FIELD_GET(MFX_REG_CHIP_ID_MASK, ~id) != (i2c_addr << 1)) {
+ dev_err(mfx_priv->dev, "unknown chip id: %#x\n", id);
+ return -EINVAL;
+ }
+
+ dev_info(mfx_priv->dev, "ST-MFX chip id: %#x, fw version: %x.%02x\n",
+ id, version[0], version[1]);
+
+ /* Disable all features, subdrivers should enable what they need */
+ ret = mfx_disable(mfx, ~0);
+ if (ret)
+ return ret;
+
+ return mfx_reset(mfx);
+}
+
+static const struct regmap_config mfx_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static const struct of_device_id mfx_of_match[] = {
+ { .compatible = "st,mfx" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mfx_of_match);
+
+static int mfx_of_probe(struct device_node *np, struct mfx_priv *mfx_priv)
+{
+ struct device_node *child;
+
+ if (!np)
+ return -ENODEV;
+
+ for_each_child_of_node(np, child) {
+ if (of_device_is_compatible(child, "st,mfx-gpio")) {
+ mfx_priv->mfx.blocks |= MFX_BLOCK_GPIO;
+ mfx_priv->mfx.num_gpio = 16;
+ }
+ /*
+ * Here we could find other children like "st,mfx-ts" or
+ * "st,mfx-idd.
+ */
+ }
+
+ if (!(mfx_priv->mfx.blocks & MFX_BLOCK_TS) &&
+ !(mfx_priv->mfx.blocks & MFX_BLOCK_IDD)) {
+ mfx_priv->mfx.blocks |= MFX_BLOCK_ALTGPIO;
+ mfx_priv->mfx.num_gpio += 8;
+ }
+
+ /*
+ * TODO: aGPIO[3:0] and aGPIO[7:4] can be used independently:
+ * - if IDD is used but not TS, aGPIO[3:0] can be used as GPIO,
+ * - if TS is used but not IDD: aGPIO[7:4] can be used as GPIO.
+ */
+
+ return of_platform_populate(np, NULL, NULL, mfx_priv->dev);
+}
+
+int mfx_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct device_node *np = client->dev.of_node;
+ struct mfx_priv *mfx_priv;
+ int ret;
+
+ mfx_priv = devm_kzalloc(&client->dev, sizeof(struct mfx_priv),
+ GFP_KERNEL);
+ if (!mfx_priv)
+ return -ENOMEM;
+
+ mfx_priv->regmap = devm_regmap_init_i2c(client, &mfx_regmap_config);
+ if (IS_ERR(mfx_priv->regmap)) {
+ ret = PTR_ERR(mfx_priv->regmap);
+ dev_err(&client->dev, "failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ mfx_priv->dev = &client->dev;
+ i2c_set_clientdata(client, &mfx_priv->mfx);
+
+ mutex_init(&mfx_priv->irq_lock);
+
+ ret = mfx_chip_init(mfx_priv, client->addr);
+ if (ret) {
+ if (ret == -ETIMEDOUT)
+ return -EPROBE_DEFER;
+
+ return ret;
+ }
+
+ ret = mfx_irq_init(mfx_priv, np);
+ if (ret < 0)
+ return ret;
+
+ ret = mfx_of_probe(np, mfx_priv);
+ if (ret < 0)
+ return ret;
+
+ dev_info(mfx_priv->dev, "ST-MFX (CORE) initialized\n");
+
+ return 0;
+}
+
+static int mfx_remove(struct i2c_client *client)
+{
+ struct mfx_priv *mfx_priv = to_mfx_priv(i2c_get_clientdata(client));
+
+ mfx_irq_remove(mfx_priv);
+ of_platform_depopulate(mfx_priv->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mfx_suspend(struct device *dev)
+{
+ struct mfx_priv *mfx_priv = to_mfx_priv(dev_get_drvdata(dev));
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(mfx_priv->irq);
+
+ /*
+ * TODO: Do we put MFX in STANDBY mode ?
+ * (Wakeup by rising edge on MFX_wakeup pin)
+ */
+
+ return 0;
+}
+
+static int mfx_resume(struct device *dev)
+{
+ struct mfx_priv *mfx_priv = to_mfx_priv(dev_get_drvdata(dev));
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(mfx_priv->irq);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(mfx_dev_pm_ops, mfx_suspend, mfx_resume);
+
+static const struct i2c_device_id mfx_i2c_id[] = {
+ { "mfx", },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, mfx_id);
+
+static struct i2c_driver mfx_driver = {
+ .driver = {
+ .name = "st-mfx",
+ .pm = &mfx_dev_pm_ops,
+ .of_match_table = mfx_of_match,
+ },
+ .probe = mfx_probe,
+ .remove = mfx_remove,
+ .id_table = mfx_i2c_id,
+};
+
+static int __init mfx_init(void)
+{
+ return i2c_add_driver(&mfx_driver);
+}
+subsys_initcall(mfx_init);
+
+static void __exit mfx_exit(void)
+{
+ i2c_del_driver(&mfx_driver);
+}
+module_exit(mfx_exit);
+
+MODULE_DESCRIPTION("STMicroelectronics Multi-Function eXpander MFD core
driver");
+MODULE_AUTHOR("Amelie Delaunay <amelie.delau...@st.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/st-mfx.h b/include/linux/mfd/st-mfx.h
new file mode 100644
index 0000000..1bf7e65
--- /dev/null
+++ b/include/linux/mfd/st-mfx.h
@@ -0,0 +1,116 @@
+/*
+ * STMicroelectronics Multi-Function eXpander (ST-MFX)
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author(s): Amelie Delaunay <amelie.delau...@st.com> for STMicroelectronics.
+ *
+ * License terms: GPL V2.0.
+ *
+ * st-mfx is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * st-mfx is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * st-mfx. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MFD_ST_MFX_H
+#define __MFD_ST_MFX_H
+
+enum mfx_block {
+ MFX_BLOCK_GPIO = BIT(0),
+ MFX_BLOCK_TS = BIT(1),
+ MFX_BLOCK_IDD = BIT(2),
+ MFX_BLOCK_ALTGPIO = BIT(3),
+};
+
+/*
+ * 8 events can activate the MFX_IRQ_OUT signal,
+ * but for the moment, only GPIO event is used
+ */
+enum mfx_irq {
+ MFX_IRQ_SRC_GPIO,
+
+ MFX_IRQ_SRC_NR,
+};
+
+/**
+ * struct mfx - MFX MFD structure
+ * @blocks: mask of mfx_block to be enabled
+ * @num_gpio: number of gpios
+ */
+struct mfx {
+ u32 blocks;
+ u32 num_gpio;
+};
+
+int mfx_reg_write(struct mfx *mfx, u8 reg, u8 data);
+int mfx_reg_read(struct mfx *mfx, u8 reg);
+int mfx_block_read(struct mfx *mfx, u8 reg, u8 length, u8 *values);
+int mfx_block_write(struct mfx *mfx, u8 reg, u8 length, const u8 *values);
+int mfx_set_bits(struct mfx *mfx, u8 reg, u8 mask, u8 val);
+int mfx_enable(struct mfx *mfx, unsigned int blocks);
+int mfx_disable(struct mfx *mfx, unsigned int blocks);
+
+/* General */
+#define MFX_REG_CHIP_ID 0x00 /* R */
+#define MFX_REG_FW_VERSION_MSB 0x01 /* R */
+#define MFX_REG_FW_VERSION_LSB 0x02 /* R */
+#define MFX_REG_SYS_CTRL 0x40 /* RW */
+/* IRQ output management */
+#define MFX_REG_IRQ_OUT_PIN 0x41 /* RW */
+#define MFX_REG_IRQ_SRC_EN 0x42 /* RW */
+#define MFX_REG_IRQ_PENDING 0x08 /* R */
+#define MFX_REG_IRQ_ACK 0x44 /* RW */
+/* GPIOs expander */
+/* GPIO_STATE1 0x10, GPIO_STATE2 0x11, GPIO_STATE3 0x12 */
+#define MFX_REG_GPIO_STATE 0x10 /* R */
+/* GPIO_DIR1 0x60, GPIO_DIR2 0x61, GPIO_DIR3 0x63 */
+#define MFX_REG_GPIO_DIR 0x60 /* RW */
+/* GPIO_TYPE1 0x64, GPIO_TYPE2 0x65, GPIO_TYPE3 0x66 */
+#define MFX_REG_GPIO_TYPE 0x64 /* RW */
+/* GPIO_PUPD1 0x68, GPIO_PUPD2 0x69, GPIO_PUPD3 0x6A */
+#define MFX_REG_GPIO_PUPD 0x68 /* RW */
+/* GPO_SET1 0x6C, GPO_SET2 0x6D, GPO_SET3 0x6E */
+#define MFX_REG_GPO_SET 0x6C /* RW */
+/* GPO_CLR1 0x70, GPO_CLR2 0x71, GPO_CLR3 0x72 */
+#define MFX_REG_GPO_CLR 0x70 /* RW */
+/* IRQ_GPI_SRC1 0x48, IRQ_GPI_SRC2 0x49, IRQ_GPI_SRC3 0x4A */
+#define MFX_REG_IRQ_GPI_SRC 0x48 /* RW */
+/* IRQ_GPI_EVT1 0x4C, IRQ_GPI_EVT2 0x4D, IRQ_GPI_EVT3 0x4E */
+#define MFX_REG_IRQ_GPI_EVT 0x4C /* RW */
+/* IRQ_GPI_TYPE1 0x50, IRQ_GPI_TYPE2 0x51, IRQ_GPI_TYPE3 0x52 */
+#define MFX_REG_IRQ_GPI_TYPE 0x50 /* RW */
+/* IRQ_GPI_PENDING1 0x0C, IRQ_GPI_PENDING2 0x0D, IRQ_GPI_PENDING3 0x0E*/
+#define MFX_REG_IRQ_GPI_PENDING 0x0C /* R */
+/* IRQ_GPI_ACK1 0x54, IRQ_GPI_ACK2 0x55, IRQ_GPI_ACK3 0x56 */
+#define MFX_REG_IRQ_GPI_ACK 0x54 /* RW */
+
+/* MFX_REG_CHIP_ID bitfields */
+#define MFX_REG_CHIP_ID_MASK GENMASK(7, 0)
+
+/* MFX_REG_SYS_CTRL bitfields */
+#define MFX_REG_SYS_CTRL_GPIO_EN BIT(0)
+#define MFX_REG_SYS_CTRL_TS_EN BIT(1)
+#define MFX_REG_SYS_CTRL_IDD_EN BIT(2)
+#define MFX_REG_SYS_CTRL_ALTGPIO_EN BIT(3)
+#define MFX_REG_SYS_CTRL_STANDBY BIT(6)
+#define MFX_REG_SYS_CTRL_SWRST BIT(7)
+
+/* MFX_REG_IRQ_OUT_PIN bitfields */
+#define MFX_REG_IRQ_OUT_PIN_TYPE BIT(0) /* 0-OD 1-PP */
+#define MFX_REG_IRQ_OUT_PIN_POL BIT(1) /* 0-active LOW 1-active
HIGH */
+
+/* MFX_REG_IRQ_SRC_EN bitfields */
+#define MFX_REG_IRQ_SRC_EN_GPIO BIT(0)
+
+/* MFX_REG_IRQ_PENDING bitfields */
+#define MFX_REG_IRQ_PENDING_GPIO BIT(0)
+
+#endif /* __MFD_ST_MFX_H */
+
--
2.7.4
