The "cooling-min-level" and "cooling-max-level" properties are not
parsed by any part of the kernel currently and the max cooling state of
a CPU cooling device is found by referring to the cpufreq table instead.

Moreover, the entries are incorrect here as min level is 4 and the max
level is 0.

Remove the unused properties from the CPU nodes.

Signed-off-by: Viresh Kumar <viresh.ku...@linaro.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi 
b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 6a180d1926e8..fca8e4ee98e7 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -88,8 +88,6 @@
                        next-level-cache = <&CLUSTER0_L2>;
                        clocks = <&stub_clock 0>;
                        operating-points-v2 = <&cpu_opp_table>;
-                       cooling-min-level = <4>;
-                       cooling-max-level = <0>;
                        #cooling-cells = <2>; /* min followed by max */
                        cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
                        dynamic-power-coefficient = <311>;
-- 
2.15.0.194.g9af6a3dea062

Reply via email to