From: Patrice Chotard <patrice.chot...@st.com>
Leds are not part of soc, so nove them outside soc node.
This allows to fix the following warnings when compiling
dtb with W=1 option :
arch/arm/boot/dts/stih407-b2120.dtb: Warning (simple_bus_reg):
Node /soc/leds missing or empty reg/ranges property
arch/arm/boot/dts/stih410-b2120.dtb: Warning (simple_bus_reg):
Node /soc/leds missing or empty reg/ranges property
arch/arm/boot/dts/stih418-b2199.dtb: Warning (simple_bus_reg):
Node /soc/leds missing or empty reg/ranges property
Signed-off-by: Patrice Chotard <patrice.chot...@st.com>
---
v2: _ none
arch/arm/boot/dts/stih410-b2260.dts | 49 ++++++++++++++++++------------------
arch/arm/boot/dts/stih418-b2199.dts | 26 +++++++++----------
arch/arm/boot/dts/stihxxx-b2120.dtsi | 26 +++++++++----------
3 files changed, 50 insertions(+), 51 deletions(-)
diff --git a/arch/arm/boot/dts/stih410-b2260.dts
b/arch/arm/boot/dts/stih410-b2260.dts
index faafc7b12951..69c2abcaeda8 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -29,36 +29,35 @@
ethernet0 = ðernet0;
};
- soc {
-
- leds {
- compatible = "gpio-leds";
- user_green_1 {
- label = "User_green_1";
- gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "heartbeat";
- default-state = "off";
- };
+ leds {
+ compatible = "gpio-leds";
+ user_green_1 {
+ label = "User_green_1";
+ gpios = <&pio1 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
- user_green_2 {
- label = "User_green_2";
- gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
+ user_green_2 {
+ label = "User_green_2";
+ gpios = <&pio4 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
- user_green_3 {
- label = "User_green_3";
- gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
+ user_green_3 {
+ label = "User_green_3";
+ gpios = <&pio2 1 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
- user_green_4 {
- label = "User_green_4";
- gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
+ user_green_4 {
+ label = "User_green_4";
+ gpios = <&pio2 5 GPIO_ACTIVE_LOW>;
+ default-state = "off";
};
+ };
+ soc {
/* Low speed expansion connector */
uart0: serial@9830000 {
label = "LS-UART0";
diff --git a/arch/arm/boot/dts/stih418-b2199.dts
b/arch/arm/boot/dts/stih418-b2199.dts
index 5418a0ece659..1ce38ce79952 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -28,24 +28,24 @@
ethernet0 = ðernet0;
};
+ leds {
+ compatible = "gpio-leds";
+ red {
+ label = "Front Panel LED";
+ gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ green {
+ gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
soc {
sbc_serial0: serial@9530000 {
status = "okay";
};
- leds {
- compatible = "gpio-leds";
- red {
- label = "Front Panel LED";
- gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- green {
- gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
i2c@9842000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi
b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 68783e8223b8..1fd3a2b5b938 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -10,24 +10,24 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/c8sectpfe.h>
/ {
+ leds {
+ compatible = "gpio-leds";
+ red {
+ label = "Front Panel LED";
+ gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ green {
+ gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
soc {
sbc_serial0: serial@9530000 {
status = "okay";
};
- leds {
- compatible = "gpio-leds";
- red {
- label = "Front Panel LED";
- gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- green {
- gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
pwm0: pwm@9810000 {
status = "okay";
};
--
1.9.1
