Dear Heiko,

在 2018年02月11日 03:55, Heiko Stuebner 写道:
Hi Wulf,

Am Montag, 22. Januar 2018, 12:33:05 CET schrieb wlf:
在 2018年01月20日 05:49, Rob Herring 写道:
On Thu, Jan 18, 2018 at 09:47:50AM -0800, Brian Norris wrote:
On Thu, Jan 18, 2018 at 06:20:09PM +0100, Enric Balletbo Serra wrote:
As Brian said commit 06c47e6286d5 'usb: dwc3: of-simple: Add support
to get resets for the device' introduced the support to get the resets
from dwc3-of-simple and the queued commit 'b7e63d95c14d arm64: dts:
rockchip: add reset property for dwc3 controllers on rk3399' started
using it. Without the latest I get errors like this doing bind/unbind

     dwc3: probe of fe900000.dwc3 failed with error -110

I just tested these series on top of mainline, I reverted my patch
because otherwise two drivers are requesting the same reset and fails,
and I did some of the bind/unbind test. They just worked fine, and
seems that this is right way, so this makes me think some questions.
Actually, this was intended to coexist with DWC3 optionally controlling
the same reset. It was written before the reset framework was rewritten
to have shared and exclusive resets. Should this be rewritten to use
shared resets? We'd have to modify both dwc3 core and the PHY driver.
Seems like abuse of DT to me. If you need to control the controller's
reset from the phy driver, then get the reset out of the controller
node. The phy node should describe the connections to the phy.
I try to get the reset out of the controller, but I don't find a good
way to get the reset ofthe controller associated with the given phy
device node.  Is there an API like theof_usb_get_dr_mode_by_phy() to
get 'dr_mode' of the controller?
I guess the easiest way would be taking the of_usb_get_dr_mode_by_phy()
function move the part above the "finish" label into a separate function
like of_usb_get_node_by_phy (or possibly move that to an even more general
place as it is not usb-related at all) and use that function in
of_usb_get_dr_mode_by_phy() and also use it to get the reset you want via
something like:

node = of_usb_get_node_by_phy(...);
rst = of_reset_control_get(node, ...);
Thanks for your good suggestion. I think it's a good way to get the reset of the
controller by phy.
And we're trying to find another method to fix the RK3399 tcphy power
on fail issue.If we get another proper method, we may not need these
phy patch series.
Did you find any different solution for that yet?

Yes, finally, we have found another way to fix the  RK3399 tcphy usb power
on fail issue. And Enric Balletbo i Serra <Enric Balletbo i Serra> has submitted
new patch series, refer to the following patches:

So my patches can be abandoned.

Reply via email to