From: Wadim Egorov <w.ego...@phytec.de>

The phyCORE-RK3288 RDK could enable SD3.0 card but need vdd_io_sd to
support the voltage range from 1.8V to 3.3V.
And we have also to add relevant UHS modes to the sdmmc node.
Let's also turn off the vdd_io_sd regulator in suspend state.

Signed-off-by: Wadim Egorov <w.ego...@phytec.de>
Signed-off-by: Daniel Schultz <d.schu...@phytec.de>
---
 arch/arm/boot/dts/rk3288-phycore-rdk.dts  | 4 ++++
 arch/arm/boot/dts/rk3288-phycore-som.dtsi | 5 ++---
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts 
b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
index ecb26f0..985743f 100644
--- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts
+++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
@@ -265,6 +265,10 @@
        disable-wp;
        pinctrl-names = "default";
        pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+       sd-uhs-sdr12;
+       sd-uhs-sdr25;
+       sd-uhs-sdr50;
+       sd-uhs-sdr104;
        vmmc-supply = <&vdd_sd>;
        vqmmc-supply = <&vdd_io_sd>;
        status = "okay";
diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi 
b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
index 5eae477..f13bcb1 100644
--- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
@@ -336,11 +336,10 @@
                                regulator-name = "vdd_io_sd";
                                regulator-always-on;
                                regulator-boot-on;
-                               regulator-min-microvolt = <3300000>;
+                               regulator-min-microvolt = <1800000>;
                                regulator-max-microvolt = <3300000>;
                                regulator-state-mem {
-                                       regulator-on-in-suspend;
-                                       regulator-suspend-microvolt = <3300000>;
+                                       regulator-off-in-suspend;
                                };
                        };
                };
-- 
2.7.4

Reply via email to