On Mon, 2018-02-12 at 16:32 +0100, Jerome Brunet wrote:
> On Fri, 2018-02-09 at 15:00 +0800, Yixun Lan wrote:
> > Adds a Clock and Reset controller driver for the Always-On part
> > of the Amlogic Meson-AXG SoC.
> > 
> > Signed-off-by: Qiufang Dai <qiufang....@amlogic.com>
> > Signed-off-by: Yixun Lan <yixun....@amlogic.com>
> > ---
> >   drivers/clk/meson/Makefile    |   2 +-
> >   drivers/clk/meson/axg-aoclk.c | 236 
> > ++++++++++++++++++++++++++++++++++++++++++
> >   drivers/clk/meson/axg-aoclk.h |  25 +++++
> >   3 files changed, 262 insertions(+), 1 deletion(-)
> >   create mode 100644 drivers/clk/meson/axg-aoclk.c
> >   create mode 100644 drivers/clk/meson/axg-aoclk.h

Yixun,

Actually, looking at this driver further, except for some of the data, the
driver is exactly the same as gxbb-aoclk. There is no reason to duplicate all
this code.

I'd prefer if you'd factor all this in a dedicated driver.
This philosophy is more or less the same as meson's pinctrl drivers, which all
provides their own data and bindings but share the driver code.

Regards
Jerome

Reply via email to