Hi Andreas,
On Sat, Feb 17, 2018 at 10:41:48PM +0100, Andreas Färber wrote:
> Am 17.02.2018 um 21:44 schrieb Manivannan Sadhasivam:
> > Add pinctrl driver for Actions Semi S900 SoC. The driver supports
> > pinctrl, pinmux and pinconf functionalities through a range of registers
> > common to both gpio driver and pinctrl driver.
> >
> > Pinmux functionality is available only for the pin groups while the
> > pinconf functionality is available for both pin groups and individual
> > pins.
> >
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasi...@linaro.org>
> > ---
> > drivers/pinctrl/Kconfig | 1 +
> > drivers/pinctrl/Makefile | 1 +
> > drivers/pinctrl/actions/Kconfig | 12 +
> > drivers/pinctrl/actions/Makefile | 2 +
> > drivers/pinctrl/actions/pinctrl-owl.c | 573 ++++++++
> > drivers/pinctrl/actions/pinctrl-owl.h | 178 +++
> > drivers/pinctrl/actions/pinctrl-s900.c | 2536
> > ++++++++++++++++++++++++++++++++
> > 7 files changed, 3303 insertions(+)
> > create mode 100644 drivers/pinctrl/actions/Kconfig
> > create mode 100644 drivers/pinctrl/actions/Makefile
> > create mode 100644 drivers/pinctrl/actions/pinctrl-owl.c
> > create mode 100644 drivers/pinctrl/actions/pinctrl-owl.h
> > create mode 100644 drivers/pinctrl/actions/pinctrl-s900.c
> >
> > diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
> > index 0f254b35c378..838c8fff8c24 100644
> > --- a/drivers/pinctrl/Kconfig
> > +++ b/drivers/pinctrl/Kconfig
> > @@ -368,6 +368,7 @@ config PINCTRL_OCELOT
> > select GENERIC_PINMUX_FUNCTIONS
> > select REGMAP_MMIO
> >
> > +source "drivers/pinctrl/actions/Kconfig"
> > source "drivers/pinctrl/aspeed/Kconfig"
> > source "drivers/pinctrl/bcm/Kconfig"
> > source "drivers/pinctrl/berlin/Kconfig"
> > diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
> > index d3692633e9ed..bf41d2484a44 100644
> > --- a/drivers/pinctrl/Makefile
> > +++ b/drivers/pinctrl/Makefile
> > @@ -48,6 +48,7 @@ obj-$(CONFIG_PINCTRL_INGENIC) += pinctrl-ingenic.o
> > obj-$(CONFIG_PINCTRL_RK805) += pinctrl-rk805.o
> > obj-$(CONFIG_PINCTRL_OCELOT) += pinctrl-ocelot.o
> >
> > +obj-$(CONFIG_ARCH_ACTIONS) += actions/
>
> Here you require CONFIG_ARCH_ACTIONS ...
>
How about making this as obj-y and having separate
CONFIG_PINCTRL_OWL and CONFIG_PINCTRL_S900 options in platform
makefile?
> > obj-$(CONFIG_ARCH_ASPEED) += aspeed/
> > obj-y += bcm/
> > obj-$(CONFIG_PINCTRL_BERLIN) += berlin/
> > diff --git a/drivers/pinctrl/actions/Kconfig
> > b/drivers/pinctrl/actions/Kconfig
> > new file mode 100644
> > index 000000000000..6075909d04e9
> > --- /dev/null
> > +++ b/drivers/pinctrl/actions/Kconfig
> > @@ -0,0 +1,12 @@
> > +config PINCTRL_OWL
> > + bool
>
> Indentation.
>
Ack.
> > + depends on (ARCH_ACTIONS || COMPILE_TEST) && OF
>
> ... so || COMPILE_TEST becomes moot.
>
> Use CONFIG_PINCTRL_OWL in Makefile instead?
>
Yes, as said above.
> > + select PINMUX
> > + select PINCONF
> > + select GENERIC_PINCONF
> > +
> > +config PINCTRL_S900
> > + bool "Actions Semi S900 pinctrl driver"
> > + select PINCTRL_OWL
> > + help
> > + Say Y here to enable Actions S900 pinctrl driver
>
> Repeating the shortened name does not seem too helpful?
>
Okay. Will make Actions Semi S900 everywhere.
> > diff --git a/drivers/pinctrl/actions/Makefile
> > b/drivers/pinctrl/actions/Makefile
> > new file mode 100644
> > index 000000000000..bd232d28400f
> > --- /dev/null
> > +++ b/drivers/pinctrl/actions/Makefile
> > @@ -0,0 +1,2 @@
> > +obj-$(CONFIG_PINCTRL_OWL) += pinctrl-owl.o
> > +obj-$(CONFIG_PINCTRL_S900) += pinctrl-s900.o
> > diff --git a/drivers/pinctrl/actions/pinctrl-owl.c
> > b/drivers/pinctrl/actions/pinctrl-owl.c
> > new file mode 100644
> > index 000000000000..7ed8625c30f3
> > --- /dev/null
> > +++ b/drivers/pinctrl/actions/pinctrl-owl.c
> > @@ -0,0 +1,573 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * OWL SoC's Pinctrl driver
> > + *
> > + * Copyright (c) 2014 Actions Semi Inc.
> > + * Author: David Liu <liu...@actions-semi.com>
> > + *
> > + * Copyright (c) 2018 Linaro Ltd.
> > + * Author: Manivannan Sadhasivam <manivannan.sadhasi...@linaro.org>
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/err.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pinctrl/machine.h>
> > +#include <linux/pinctrl/pinctrl.h>
> > +#include <linux/pinctrl/pinmux.h>
> > +#include <linux/pinctrl/pinconf.h>
> > +#include <linux/pinctrl/pinconf-generic.h>
> > +#include <linux/slab.h>
> > +#include <linux/spinlock.h>
> > +
> > +#include "../core.h"
> > +#include "../pinctrl-utils.h"
> > +#include "pinctrl-owl.h"
> > +
> > +/**
> > + * struct owl_pinctrl - pinctrl state of the device
> > + * @dev: device handle
> > + * @pctrldev: pinctrl handle
> > + * @lock: spinlock to protect registers
> > + * @soc: reference to soc_data
> > + * @base: pinctrl register base address
> > + */
> > +struct owl_pinctrl {
> > + struct device *dev;
> > + struct pinctrl_dev *pctrldev;
> > + raw_spinlock_t lock;
> > + struct clk *clk;
> > + const struct owl_pinctrl_soc_data *soc;
> > + void __iomem *base;
> > +};
> > +
> > +static int owl_get_groups_count(struct pinctrl_dev *pctrldev)
> > +{
> > + struct owl_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrldev);
> > +
> > + return pctrl->soc->ngroups;
> > +}
> > +
> > +static const char *owl_get_group_name(struct pinctrl_dev *pctrldev,
> > + unsigned int group)
> > +{
> > + struct owl_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrldev);
> > +
> > + return pctrl->soc->groups[group].name;
> > +}
> > +
> > +static int owl_get_group_pins(struct pinctrl_dev *pctrldev,
> > + unsigned int group,
> > + const unsigned int **pins,
> > + unsigned int *num_pins)
> > +{
> > + struct owl_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrldev);
> > +
> > + *pins = pctrl->soc->groups[group].pads;
> > + *num_pins = pctrl->soc->groups[group].npads;
> > +
> > + return 0;
> > +}
> > +
> > +static void owl_pin_dbg_show(struct pinctrl_dev *pctrldev,
> > + struct seq_file *s,
> > + unsigned int offset)
> > +{
> > + struct owl_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrldev);
> > +
> > + seq_printf(s, "%s", dev_name(pctrl->dev));
> > +}
> > +
> > +static struct pinctrl_ops owl_pinctrl_ops = {
> > + .get_groups_count = owl_get_groups_count,
> > + .get_group_name = owl_get_group_name,
> > + .get_group_pins = owl_get_group_pins,
> > + .pin_dbg_show = owl_pin_dbg_show,
> > + .dt_node_to_map = pinconf_generic_dt_node_to_map_all,
> > + .dt_free_map = pinctrl_utils_free_map,
> > +};
> > +
> > +static int owl_get_funcs_count(struct pinctrl_dev *pctrldev)
> > +{
> > + struct owl_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrldev);
> > +
> > + return pctrl->soc->nfunctions;
> > +}
> > +
> > +static const char *owl_get_func_name(struct pinctrl_dev *pctrldev,
> > + unsigned int function)
> > +{
> > + struct owl_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrldev);
> > +
> > + return pctrl->soc->functions[function].name;
> > +}
> > +
> > +static int owl_get_func_groups(struct pinctrl_dev *pctrldev,
> > + unsigned int function,
> > + const char * const **groups,
> > + unsigned int * const num_groups)
> > +{
> > + struct owl_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrldev);
> > +
> > + *groups = pctrl->soc->functions[function].groups;
> > + *num_groups = pctrl->soc->functions[function].ngroups;
> > +
> > + return 0;
> > +}
> > +
> > +static inline int get_group_mfp_mask_val(const struct owl_pingroup *g,
> > + int function,
> > + u32 *mask,
> > + u32 *val)
> > +{
> > + int id;
> > + u32 option_num;
> > + u32 option_mask;
> > +
> > + for (id = 0; id < g->nfuncs; id++) {
> > + if (g->funcs[id] == function)
> > + break;
> > + }
> > + if (WARN_ON(id == g->nfuncs))
> > + return -EINVAL;
> > +
> > + option_num = (1 << g->mfpctl_width);
> > + if (id > option_num)
> > + id -= option_num;
> > +
> > + option_mask = option_num - 1;
> > + *mask = (option_mask << g->mfpctl_shift);
> > + *val = (id << g->mfpctl_shift);
> > +
> > + return 0;
> > +}
> > +
> > +static int owl_set_mux(struct pinctrl_dev *pctrldev,
> > + unsigned int function,
> > + unsigned int group)
> > +{
> > + struct owl_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrldev);
> > + const struct owl_pingroup *g;
> > + unsigned long flags;
> > + u32 val, mask, mfpval;
> > +
> > + g = &pctrl->soc->groups[group];
> > +
> > + if (get_group_mfp_mask_val(g, function, &mask, &val))
> > + return -EINVAL;
> > +
> > + raw_spin_lock_irqsave(&pctrl->lock, flags);
> > +
> > + mfpval = readl(pctrl->base + g->mfpctl_reg);
> > + mfpval &= ~mask;
> > + mfpval |= val;
> > + writel(mfpval, pctrl->base + g->mfpctl_reg);
> > +
> > + raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> > +
> > + return 0;
> > +}
> > +
> > +static struct pinmux_ops owl_pinmux_ops = {
> > + .get_functions_count = owl_get_funcs_count,
> > + .get_function_name = owl_get_func_name,
> > + .get_function_groups = owl_get_func_groups,
> > + .set_mux = owl_set_mux,
> > +};
> > +
> > +static int owl_pad_pinconf_reg(const struct owl_padinfo *info,
> > + unsigned int param,
> > + u32 *reg,
> > + u32 *bit,
> > + u32 *width)
> > +{
> > + switch (param) {
> > + case PIN_CONFIG_BIAS_BUS_HOLD:
> > + case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
> > + case PIN_CONFIG_BIAS_PULL_DOWN:
> > + case PIN_CONFIG_BIAS_PULL_UP:
> > + if (!info->pullctl)
> > + return -EINVAL;
> > + *reg = info->pullctl->reg;
> > + *bit = info->pullctl->shift;
> > + *width = info->pullctl->width;
> > + break;
> > + case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
> > + if (!info->st)
> > + return -EINVAL;
> > + *reg = info->st->reg;
> > + *bit = info->st->shift;
> > + *width = info->st->width;
> > + break;
> > + default:
> > + return -ENOTSUPP;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int owl_pad_pinconf_arg2val(const struct owl_padinfo *info,
> > + unsigned int param,
> > + u32 *arg)
> > +{
> > + switch (param) {
> > + case PIN_CONFIG_BIAS_BUS_HOLD:
> > + *arg = OWL_PINCONF_PULL_HOLD;
> > + break;
> > + case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
> > + *arg = OWL_PINCONF_PULL_HIZ;
> > + break;
> > + case PIN_CONFIG_BIAS_PULL_DOWN:
> > + *arg = OWL_PINCONF_PULL_DOWN;
> > + break;
> > + case PIN_CONFIG_BIAS_PULL_UP:
> > + *arg = OWL_PINCONF_PULL_UP;
> > + break;
> > + case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
> > + *arg = (*arg >= 1 ? 1 : 0);
> > + break;
> > + default:
> > + return -ENOTSUPP;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int owl_pad_pinconf_val2arg(const struct owl_padinfo *padinfo,
> > + unsigned int param,
> > + u32 *arg)
> > +{
> > + switch (param) {
> > + case PIN_CONFIG_BIAS_BUS_HOLD:
> > + *arg = *arg == OWL_PINCONF_PULL_HOLD;
> > + break;
> > + case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
> > + *arg = *arg == OWL_PINCONF_PULL_HIZ;
> > + break;
> > + case PIN_CONFIG_BIAS_PULL_DOWN:
> > + *arg = *arg == OWL_PINCONF_PULL_DOWN;
> > + break;
> > + case PIN_CONFIG_BIAS_PULL_UP:
> > + *arg = *arg == OWL_PINCONF_PULL_UP;
> > + break;
> > + case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
> > + *arg = *arg == 1;
> > + break;
> > + default:
> > + return -ENOTSUPP;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int owl_pin_config_get(struct pinctrl_dev *pctrldev,
> > + unsigned int pin,
> > + unsigned long *config)
> > +{
> > + int ret = 0;
> > + struct owl_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrldev);
> > + const struct owl_padinfo *info;
> > + unsigned int param = pinconf_to_config_param(*config);
> > + u32 reg, bit, width;
> > + u32 tmp, mask;
> > + u32 arg = 0;
> > +
> > + info = &pctrl->soc->padinfo[pin];
> > +
> > + ret = owl_pad_pinconf_reg(info, param, ®, &bit, &width);
> > + if (ret)
> > + return ret;
> > +
> > + tmp = readl(pctrl->base + reg);
> > + mask = (1 << width) - 1;
> > + arg = (tmp >> bit) & mask;
> > +
> > + ret = owl_pad_pinconf_val2arg(info, param, &arg);
> > + if (ret)
> > + return ret;
> > +
> > + *config = pinconf_to_config_packed(param, arg);
> > +
> > + return ret;
> > +}
> > +
> > +static int owl_pin_config_set(struct pinctrl_dev *pctrldev,
> > + unsigned int pin,
> > + unsigned long *configs,
> > + unsigned int num_configs)
> > +{
> > + int ret = 0;
> > + struct owl_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrldev);
> > + const struct owl_padinfo *info;
> > + unsigned long flags;
> > + unsigned int param;
> > + u32 reg, bit, width;
> > + u32 mask = 0, tmp, arg = 0;
> > + int i;
> > +
> > + info = &pctrl->soc->padinfo[pin];
> > +
> > + for (i = 0; i < num_configs; i++) {
> > + param = pinconf_to_config_param(configs[i]);
> > + arg = pinconf_to_config_argument(configs[i]);
> > +
> > + ret = owl_pad_pinconf_reg(info, param, ®, &bit, &width);
> > + if (ret)
> > + return ret;
> > +
> > + ret = owl_pad_pinconf_arg2val(info, param, &arg);
> > + if (ret)
> > + return ret;
> > +
> > + raw_spin_lock_irqsave(&pctrl->lock, flags);
> > +
> > + mask = (1 << width) - 1;
> > + mask = mask << bit;
> > + tmp = readl(pctrl->base + reg);
> > + tmp &= ~mask;
> > + tmp |= arg << bit;
> > + writel(tmp, pctrl->base + reg);
> > +
> > + raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int owl_group_pinconf_reg(const struct owl_pingroup *g,
> > + unsigned int param,
> > + u32 *reg,
> > + u32 *bit,
> > + u32 *width)
> > +{
> > + switch (param) {
> > + case PIN_CONFIG_DRIVE_STRENGTH:
> > + if (g->drv_reg < 0)
> > + return -EINVAL;
> > + *reg = g->drv_reg;
> > + *bit = g->drv_shift;
> > + *width = g->drv_width;
> > + break;
> > + case PIN_CONFIG_SLEW_RATE:
> > + if (g->sr_reg < 0)
> > + return -EINVAL;
> > + *reg = g->sr_reg;
> > + *bit = g->sr_shift;
> > + *width = g->sr_width;
> > + break;
> > + default:
> > + return -ENOTSUPP;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int owl_group_pinconf_arg2val(const struct owl_pingroup *g,
> > + unsigned int param,
> > + u32 *arg)
> > +{
> > + switch (param) {
> > + case PIN_CONFIG_DRIVE_STRENGTH:
> > + switch (*arg) {
> > + case 2:
> > + *arg = OWL_PINCONF_DRV_2MA;
> > + break;
> > + case 4:
> > + *arg = OWL_PINCONF_DRV_4MA;
> > + break;
> > + case 8:
> > + *arg = OWL_PINCONF_DRV_8MA;
> > + break;
> > + case 12:
> > + *arg = OWL_PINCONF_DRV_12MA;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > + case PIN_CONFIG_SLEW_RATE:
> > + if (*arg)
> > + *arg = OWL_PINCONF_SLEW_FAST;
> > + else
> > + *arg = OWL_PINCONF_SLEW_SLOW;
> > + break;
> > + default:
> > + return -ENOTSUPP;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int owl_group_pinconf_val2arg(const struct owl_pingroup *g,
> > + unsigned int param,
> > + u32 *arg)
> > +{
> > + switch (param) {
> > + case PIN_CONFIG_DRIVE_STRENGTH:
> > + switch (*arg) {
> > + case OWL_PINCONF_DRV_2MA:
> > + *arg = 2;
> > + break;
> > + case OWL_PINCONF_DRV_4MA:
> > + *arg = 4;
> > + break;
> > + case OWL_PINCONF_DRV_8MA:
> > + *arg = 8;
> > + break;
> > + case OWL_PINCONF_DRV_12MA:
> > + *arg = 12;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > + case PIN_CONFIG_SLEW_RATE:
> > + if (*arg)
> > + *arg = 1;
> > + else
> > + *arg = 0;
> > + break;
> > + default:
> > + return -ENOTSUPP;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int owl_group_config_get(struct pinctrl_dev *pctrldev,
> > + unsigned int group,
> > + unsigned long *config)
> > +{
> > + int ret = 0;
> > + const struct owl_pingroup *g;
> > + struct owl_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrldev);
> > + unsigned int param = pinconf_to_config_param(*config);
> > + u32 reg, bit, width;
> > + u32 mask, tmp, arg = 0;
> > +
> > + g = &pctrl->soc->groups[group];
> > +
> > + ret = owl_group_pinconf_reg(g, param, ®, &bit, &width);
> > + if (ret)
> > + return ret;
> > +
> > + tmp = readl(pctrl->base + reg);
> > + mask = (1 << width) - 1;
> > + arg = (tmp >> bit) & mask;
> > +
> > + ret = owl_group_pinconf_val2arg(g, param, &arg);
> > + if (ret)
> > + return ret;
> > +
> > + *config = pinconf_to_config_packed(param, arg);
> > +
> > + return ret;
> > +
> > +}
> > +
> > +static int owl_group_config_set(struct pinctrl_dev *pctrldev,
> > + unsigned int group,
> > + unsigned long *configs,
> > + unsigned int num_configs)
> > +{
> > + int ret = 0;
> > + const struct owl_pingroup *g;
> > + struct owl_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctrldev);
> > + unsigned long flags;
> > + unsigned int param;
> > + u32 reg, bit, width;
> > + u32 mask, arg = 0;
> > + u32 tmp;
> > + int i;
> > +
> > + g = &pctrl->soc->groups[group];
> > +
> > + for (i = 0; i < num_configs; i++) {
> > + param = pinconf_to_config_param(configs[i]);
> > + arg = pinconf_to_config_argument(configs[i]);
> > +
> > + ret = owl_group_pinconf_reg(g, param, ®, &bit, &width);
> > + if (ret)
> > + return ret;
> > +
> > + ret = owl_group_pinconf_arg2val(g, param, &arg);
> > + if (ret)
> > + return ret;
> > +
> > + /* Update register */
> > + raw_spin_lock_irqsave(&pctrl->lock, flags);
> > +
> > + mask = (1 << width) - 1;
> > + mask = mask << bit;
> > + tmp = readl(pctrl->base + reg);
> > + tmp &= ~mask;
> > + tmp |= arg << bit;
> > + writel(tmp, pctrl->base + reg);
> > +
> > + raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static const struct pinconf_ops owl_pinconf_ops = {
> > + .is_generic = true,
> > + .pin_config_get = owl_pin_config_get,
> > + .pin_config_set = owl_pin_config_set,
> > + .pin_config_group_get = owl_group_config_get,
> > + .pin_config_group_set = owl_group_config_set,
> > +};
> > +
> > +static struct pinctrl_desc owl_pinctrl_desc = {
> > + .pctlops = &owl_pinctrl_ops,
> > + .pmxops = &owl_pinmux_ops,
> > + .confops = &owl_pinconf_ops,
> > + .owner = THIS_MODULE,
> > +};
> > +
> > +int owl_pinctrl_probe(struct platform_device *pdev,
> > + struct owl_pinctrl_soc_data *soc_data)
> > +{
> > + struct resource *res;
> > + struct owl_pinctrl *pctrl;
> > +
> > + pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
> > + if (!pctrl)
> > + return -ENOMEM;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + pctrl->base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(pctrl->base))
> > + return PTR_ERR(pctrl->base);
> > +
> > + /* enable GPIO/MFP clock */
> > + pctrl->clk = devm_clk_get(&pdev->dev, NULL);
> > + if (IS_ERR(pctrl->clk)) {
> > + dev_err(&pdev->dev, "no clock defined\n");
> > + return -ENODEV;
>
> You need to return PTR_ERR(pctrl->clk) to make deferred loading work.
>
Ack.
> > + }
> > + clk_prepare_enable(pctrl->clk);
> > +
> > + raw_spin_lock_init(&pctrl->lock);
> > +
> > + owl_pinctrl_desc.name = dev_name(&pdev->dev);
> > + owl_pinctrl_desc.pins = soc_data->pins;
> > + owl_pinctrl_desc.npins = soc_data->npins;
> > +
> > + pctrl->soc = soc_data;
> > + pctrl->dev = &pdev->dev;
> > +
> > + pctrl->pctrldev = devm_pinctrl_register(&pdev->dev,
> > + &owl_pinctrl_desc, pctrl);
> > + if (IS_ERR(pctrl->pctrldev)) {
> > + dev_err(&pdev->dev, "could not register Actions OWL pinmux
> > driver\n");
> > + return PTR_ERR(pctrl->pctrldev);
> > + }
> > +
> > + platform_set_drvdata(pdev, pctrl);
> > +
> > + pr_info("Initialized Actions OWL pin control driver\n");
>
> Drop?
>
Ack.
> > +
> > + return 0;
> > +}
> [snip]
>
> Let's discuss concerns about the naming and design separately.
>
So, as per our discussion I'll be making all the pin names as lowercase
and the register name based pin groups will be changed to handle pinmuxing
using individual pins.
Thanks,
Mani
> Regards,
> Andreas
>
> --
> SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
> GF: Felix Imendörffer, Jane Smithard, Graham Norton
> HRB 21284 (AG Nürnberg)
