Add a skeletal sdm845 SoC dtsi and MTP board dts/dtsi files

Signed-off-by: Rajendra Nayak <rna...@codeaurora.org>
Reviewed-by: Doug Anderson <diand...@chromium.org>
---
 arch/arm64/boot/dts/qcom/Makefile       |   1 +
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts |  15 ++
 arch/arm64/boot/dts/qcom/sdm845.dtsi    | 277 ++++++++++++++++++++++++++++++++
 3 files changed, 293 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sdm845-mtp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sdm845.dtsi

diff --git a/arch/arm64/boot/dts/qcom/Makefile 
b/arch/arm64/boot/dts/qcom/Makefile
index 55ec5ee7f7e8..9319e74b8906 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -6,3 +6,4 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8992-bullhead-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8994-angler-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)        += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)        += sdm845-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts 
b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
new file mode 100644
index 000000000000..979ab49913f1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 MTP board device tree source
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sdm845.dtsi"
+
+/ {
+       model = "Qualcomm Technologies, Inc. SDM845 MTP";
+       compatible = "qcom,sdm845-mtp";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi 
b/arch/arm64/boot/dts/qcom/sdm845.dtsi
new file mode 100644
index 000000000000..da3d6ac906c8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -0,0 +1,277 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 SoC device tree source
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+       interrupt-parent = <&intc>;
+
+       #address-cells = <2>;
+       #size-cells = <2>;
+
+       chosen { };
+
+       memory@80000000 {
+               device_type = "memory";
+               /* We expect the bootloader to fill in the size */
+               reg = <0 0x80000000 0 0>;
+       };
+
+       cpus {
+               #address-cells = <2>;
+               #size-cells = <0>;
+
+               CPU0: cpu@0 {
+                       device_type = "cpu";
+                       compatible = "qcom,kryo385";
+                       reg = <0x0 0x0>;
+                       enable-method = "psci";
+                       next-level-cache = <&L2_0>;
+                       L2_0: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                               L3_0: l3-cache {
+                                     compatible = "cache";
+                               };
+                       };
+               };
+
+               CPU1: cpu@100 {
+                       device_type = "cpu";
+                       compatible = "qcom,kryo385";
+                       reg = <0x0 0x100>;
+                       enable-method = "psci";
+                       next-level-cache = <&L2_100>;
+                       L2_100: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                       };
+               };
+
+               CPU2: cpu@200 {
+                       device_type = "cpu";
+                       compatible = "qcom,kryo385";
+                       reg = <0x0 0x200>;
+                       enable-method = "psci";
+                       next-level-cache = <&L2_200>;
+                       L2_200: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                       };
+               };
+
+               CPU3: cpu@300 {
+                       device_type = "cpu";
+                       compatible = "qcom,kryo385";
+                       reg = <0x0 0x300>;
+                       enable-method = "psci";
+                       next-level-cache = <&L2_300>;
+                       L2_300: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                       };
+               };
+
+               CPU4: cpu@400 {
+                       device_type = "cpu";
+                       compatible = "qcom,kryo385";
+                       reg = <0x0 0x400>;
+                       enable-method = "psci";
+                       next-level-cache = <&L2_400>;
+                       L2_400: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                       };
+               };
+
+               CPU5: cpu@500 {
+                       device_type = "cpu";
+                       compatible = "qcom,kryo385";
+                       reg = <0x0 0x500>;
+                       enable-method = "psci";
+                       next-level-cache = <&L2_500>;
+                       L2_500: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                       };
+               };
+
+               CPU6: cpu@600 {
+                       device_type = "cpu";
+                       compatible = "qcom,kryo385";
+                       reg = <0x0 0x600>;
+                       enable-method = "psci";
+                       next-level-cache = <&L2_600>;
+                       L2_600: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                       };
+               };
+
+               CPU7: cpu@700 {
+                       device_type = "cpu";
+                       compatible = "qcom,kryo385";
+                       reg = <0x0 0x700>;
+                       enable-method = "psci";
+                       next-level-cache = <&L2_700>;
+                       L2_700: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                       };
+               };
+       };
+
+       timer {
+               compatible = "arm,armv8-timer";
+               interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+                            <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+                            <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+                            <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+       };
+
+       clocks {
+               xo_board: xo-board {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <19200000>;
+               };
+
+               sleep_clk: sleep-clk {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <32764>;
+               };
+       };
+
+       psci {
+               compatible = "arm,psci-1.0";
+               method = "smc";
+       };
+
+       soc: soc {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges = <0 0 0 0xffffffff>;
+               compatible = "simple-bus";
+
+               intc: interrupt-controller@17a00000 {
+                       compatible = "arm,gic-v3";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges;
+                       #interrupt-cells = <3>;
+                       interrupt-controller;
+                       #redistributor-regions = <1>;
+                       redistributor-stride = <0x0 0x20000>;
+                       reg = <0x17a00000 0x10000>,     /* GICD */
+                             <0x17a60000 0x100000>;    /* GICR * 8 */
+                       interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+                       gic-its@17a40000 {
+                               compatible = "arm,gic-v3-its";
+                               msi-controller;
+                               #msi-cells = <1>;
+                               reg = <0x17a40000 0x20000>;
+                               status = "disabled";
+                       };
+               };
+
+               gcc: clock-controller@100000 {
+                       compatible = "qcom,gcc-sdm845";
+                       reg = <0x100000 0x1f0000>;
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+               };
+
+               tlmm: pinctrl@3400000 {
+                       compatible = "qcom,sdm845-pinctrl";
+                       reg = <0x03400000 0xc00000>;
+                       interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               timer@17c90000 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges;
+                       compatible = "arm,armv7-timer-mem";
+                       reg = <0x17c90000 0x1000>;
+
+                       frame@17ca0000 {
+                               frame-number = <0>;
+                               interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+                               reg = <0x17ca0000 0x1000>,
+                                     <0x17cb0000 0x1000>;
+                       };
+
+                       frame@17cc0000 {
+                               frame-number = <1>;
+                               interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+                               reg = <0x17cc0000 0x1000>;
+                               status = "disabled";
+                       };
+
+                       frame@17cd0000 {
+                               frame-number = <2>;
+                               interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+                               reg = <0x17cd0000 0x1000>;
+                               status = "disabled";
+                       };
+
+                       frame@17ce0000 {
+                               frame-number = <3>;
+                               interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+                               reg = <0x17ce0000 0x1000>;
+                               status = "disabled";
+                       };
+
+                       frame@17cf0000 {
+                               frame-number = <4>;
+                               interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+                               reg = <0x17cf0000 0x1000>;
+                               status = "disabled";
+                       };
+
+                       frame@17d00000 {
+                               frame-number = <5>;
+                               interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+                               reg = <0x17d00000 0x1000>;
+                               status = "disabled";
+                       };
+
+                       frame@17d10000 {
+                               frame-number = <6>;
+                               interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+                               reg = <0x17d10000 0x1000>;
+                               status = "disabled";
+                       };
+               };
+
+               spmi_bus: spmi@c440000 {
+                       compatible = "qcom,spmi-pmic-arb";
+                       reg = <0xc440000 0x1100>,
+                             <0xc600000 0x2000000>,
+                             <0xe600000 0x100000>,
+                             <0xe700000 0xa0000>,
+                             <0xc40a000 0x26000>;
+                       reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+                       interrupt-names = "periph_irq";
+                       interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+                       qcom,ee = <0>;
+                       qcom,channel = <0>;
+                       #address-cells = <2>;
+                       #size-cells = <0>;
+                       interrupt-controller;
+                       #interrupt-cells = <4>;
+                       cell-index = <0>;
+               };
+       };
+};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

Reply via email to