Hi all, This series of changes makes ti-sysc driver to use device tree data for configuring the interconnect target module registers. We already have smartreflex dts data configured according to the binding for ti-sysc, so that will be the first user.
I've added code to check the dts data against the existing platform data to make sure we're not causing regressions. And I've verified that PM still works. Regards, Tony Tony Lindgren (12): bus: ti-sysc: Add fck clock alias for children with notifier_block bus: ti-sysc: Add suspend and resume handling bus: ti-sysc: Handle stdout-path for debug console bus: ti-sysc: Improve handling for no-reset-on-init and no-idle-on-init bus: ti-sysc: Remove unnecessary debugging statements bus: ti-sysc: Add support for platform data callbacks bus: ti-sysc: Handle some devices in omap_device compatible way ARM: OMAP2+: Add functions to allocate module data from device tree ARM: OMAP2+: Add checks for device tree based sysconfig data ARM: OMAP2+: Try to parse earlycon from parent too PM / AVS: SmartReflex: Prepare to use device tree based probing ARM: OMAP2+: Enable ti-sysc to use device tree data for smartreflex arch/arm/mach-omap2/board-n8x0.c | 4 +- arch/arm/mach-omap2/omap_device.c | 5 + arch/arm/mach-omap2/omap_hwmod.c | 418 ++++++++++++++++++++++++++- arch/arm/mach-omap2/omap_hwmod.h | 7 + arch/arm/mach-omap2/pdata-quirks.c | 41 ++- arch/arm/mach-omap2/sr_device.c | 25 +- drivers/bus/ti-sysc.c | 527 +++++++++++++++++++++++++++++++--- drivers/power/avs/smartreflex.c | 41 ++- include/linux/platform_data/ti-sysc.h | 50 ++++ 9 files changed, 1063 insertions(+), 55 deletions(-) -- 2.16.2