On Fri, 23 Feb 2018 14:46:19 +0100
Arnaud Pouliquen <arnaud.pouliq...@st.com> wrote:
> Hello,
>
> Acked-by: Arnaud Pouliquen <arnaud.pouliq...@st.com>
Applied to the fixes-togreg branch of iio.git.
Thanks,
Jonathan
>
> Regards,
> Arnaud
>
> On 02/23/2018 12:07 PM, Fabrice Gasnier wrote:
> > io-channel-cells should be <0> since sigma delta modulator exports only
> > one channel, as described in ../iio/iio-bindings.txt "IIO providers"
> > section. Only the phandle is necessary for IIO consumers in this case.
> >
> > Fixes: af11143757b7 ("IIO: Add DT bindings for sigma delta adc modulator")
> >
> > Signed-off-by: Fabrice Gasnier <fabrice.gasn...@st.com>
> > ---
> > Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt | 4
> > ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
> > b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
> > index e9ebb8a..ba24ca7 100644
> > --- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
> > +++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
> > @@ -3,11 +3,11 @@ Device-Tree bindings for sigma delta modulator
> > Required properties:
> > - compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be
> > use
> > as a generic SD modulator if modulator not specified in compatible list.
> > -- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers".
> > +- #io-channel-cells = <0>: See the IIO bindings section "IIO consumers".
> >
> > Example node:
> >
> > ads1202: adc@0 {
> > compatible = "sd-modulator";
> > - #io-channel-cells = <1>;
> > + #io-channel-cells = <0>;
> > };
> >
