cortina_soft_reset() does the same thing as gen10g_soft_reset(), and
cortina_config_aneg() is actually doing what gen10g_config_init() does
for 10G capable PHYs.
Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
---
drivers/net/phy/cortina.c | 18 +++---------------
1 file changed, 3 insertions(+), 15 deletions(-)
diff --git a/drivers/net/phy/cortina.c b/drivers/net/phy/cortina.c
index 9442db221834..9afbeb8b3667 100644
--- a/drivers/net/phy/cortina.c
+++ b/drivers/net/phy/cortina.c
@@ -30,14 +30,6 @@ static int cortina_read_reg(struct phy_device *phydev, u16
regnum)
MII_ADDR_C45 | regnum);
}
-static int cortina_config_aneg(struct phy_device *phydev)
-{
- phydev->supported = SUPPORTED_10000baseT_Full;
- phydev->advertising = SUPPORTED_10000baseT_Full;
-
- return 0;
-}
-
static int cortina_read_status(struct phy_device *phydev)
{
int gpio_int_status, ret = 0;
@@ -61,11 +53,6 @@ static int cortina_read_status(struct phy_device *phydev)
return ret;
}
-static int cortina_soft_reset(struct phy_device *phydev)
-{
- return 0;
-}
-
static int cortina_probe(struct phy_device *phydev)
{
u32 phy_id = 0;
@@ -101,9 +88,10 @@ static struct phy_driver cortina_driver[] = {
.phy_id = PHY_ID_CS4340,
.phy_id_mask = 0xffffffff,
.name = "Cortina CS4340",
- .config_aneg = cortina_config_aneg,
+ .config_init = gen10g_config_init,
+ .config_aneg = gen10g_config_aneg,
.read_status = cortina_read_status,
- .soft_reset = cortina_soft_reset,
+ .soft_reset = gen10g_soft_reset,
.probe = cortina_probe,
},
};
--
2.14.1
