Anson Huang Best Regards!
> -----Original Message----- > From: Rob Herring [mailto:[email protected]] > Sent: Friday, March 2, 2018 5:23 AM > To: Anson Huang <[email protected]> > Cc: Leonard Crestez <[email protected]>; [email protected]; > [email protected]; [email protected]; [email protected]; > [email protected]; Fabio Estevam <[email protected]>; > [email protected]; [email protected]; > [email protected]; dl-linux-imx <[email protected]>; > [email protected]; [email protected] > Subject: Re: [PATCH V5 2/2] thermal: imx: add i.MX7 thermal sensor support > > On Thu, Mar 01, 2018 at 07:09:40AM +0800, Anson Huang wrote: > > This patch adds i.MX7 thermal sensor support, most of the i.MX7 > > thermal sensor functions are same with > > i.MX6 except the registers offset/layout, so we move those registers > > offset/layout definitions to soc data structure. > > > > i.MX7 uses single calibration data @25C, the calibration data is > > located at OCOTP offset 0x4F0, bit[17:9], the formula is as below: > > > > Tmeas = (Nmeas - n1) + 25; n1 is the fuse value for 25C. > > > > Signed-off-by: Anson Huang <[email protected]> > > Signed-off-by: Bai Ping <[email protected]> > > Acked-by: Dong Aisheng <[email protected]> > > Acked-by: Shawn Guo <[email protected]> > > --- > > changes since V4: > > drop direct OCOTP register access for i.mx7d since it is a new added > platform, > > only support reading ocotp values through the ocotp nvmem driver which > handles clock. > > .../devicetree/bindings/thermal/imx-thermal.txt | 9 +- > > drivers/thermal/imx_thermal.c | 295 > ++++++++++++++++----- > > 2 files changed, 239 insertions(+), 65 deletions(-) > > Please add ack/reviewed-by's when posting new versions. > > Rob Sorry for missing it, I just sent out a V6 adding Reviewed-by, thanks. Anson.
