On 01/03/2018 21:40, Rob Herring wrote:
On Tue, Feb 20, 2018 at 03:13:24AM +0800, John Garry wrote:
From: Xiaofei Tan <tanxiao...@huawei.com>

For some new boards with hip07 chipset we are required to
set PHY config registers differently. The hw property which
determines how to set these registers is in the PHY signal
attenuation readings.

This patch add an devicetree property, signal-attenuation, which
is used to describe the signal attenuation of an board.

Cc: Rob Herring <robh...@kernel.org>
Cc: Mark Rutland <mark.rutl...@arm.com>
Signed-off-by: Xiaofei Tan <tanxiao...@huawei.com>
Signed-off-by: John Garry <john.ga...@huawei.com>
 Documentation/devicetree/bindings/scsi/hisilicon-sas.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt 
index df3bef7..bd32ecd 100644
--- a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
+++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
@@ -53,6 +53,13 @@ Main node required properties:
 Optional main node properties:
  - hip06-sas-v2-quirk-amt : when set, indicates that the v2 controller has the
                            "am-max-transmissions" limitation.
+ - signal-attenuation : array of 3 32-bit values, containing de-emphasis,

Needs a vendor prefix.

Fine, I can add it. It's going to be "hisilicon-signal-attenuation" or similar.


+               preshoot, and boost attenuation readings for the board. They
+               are used to describe the signal attenuation of the board. These
+               values' range is 7600 to 12400, and used to represent -24dB to
+               24dB.
+               The formula is "y = (x-10000)/10000". For example, 10478
+               means 4.78dB.

        sas0: sas@c1000000 {


Reply via email to