From: Xiaofei Tan <tanxiao...@huawei.com>

It is not right to set the register PROG_PHY_LINK_RATE while PHY
is still enabled. So if we want to change PHY linkrate, we need to
disable PHY before setting the register PROG_PHY_LINK_RATE, and then
start-up PHY. This patch is to fix this issue.

Signed-off-by: Xiaofei Tan <tanxiao...@huawei.com>
Signed-off-by: John Garry <john.ga...@huawei.com>
---
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 5 +++--
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 5 +++--
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 5 +++--
 3 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c 
b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 38bbda9..2eb8980 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -881,10 +881,11 @@ static void phy_set_linkrate_v1_hw(struct hisi_hba 
*hisi_hba, int phy_no,
        prog_phy_link_rate &= ~0xff;
        prog_phy_link_rate |= rate_mask;
 
+       disable_phy_v1_hw(hisi_hba, phy_no);
+       msleep(100);
        hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
                        prog_phy_link_rate);
-
-       phy_hard_reset_v1_hw(hisi_hba, phy_no);
+       start_phy_v1_hw(hisi_hba, phy_no);
 }
 
 static int get_wideport_bitmap_v1_hw(struct hisi_hba *hisi_hba, int port_id)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c 
b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index edd0c89..80fd4f4 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -1611,10 +1611,11 @@ static void phy_set_linkrate_v2_hw(struct hisi_hba 
*hisi_hba, int phy_no,
        prog_phy_link_rate &= ~0xff;
        prog_phy_link_rate |= rate_mask;
 
+       disable_phy_v2_hw(hisi_hba, phy_no);
+       msleep(100);
        hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
                        prog_phy_link_rate);
-
-       phy_hard_reset_v2_hw(hisi_hba, phy_no);
+       start_phy_v2_hw(hisi_hba, phy_no);
 }
 
 static int get_wideport_bitmap_v2_hw(struct hisi_hba *hisi_hba, int port_id)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c 
b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 1ee95ab..8da9de7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1862,10 +1862,11 @@ static void phy_set_linkrate_v3_hw(struct hisi_hba 
*hisi_hba, int phy_no,
        prog_phy_link_rate &= ~0xff;
        prog_phy_link_rate |= rate_mask;
 
+       disable_phy_v3_hw(hisi_hba, phy_no);
+       msleep(100);
        hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
                        prog_phy_link_rate);
-
-       phy_hard_reset_v3_hw(hisi_hba, phy_no);
+       start_phy_v3_hw(hisi_hba, phy_no);
 }
 
 static void interrupt_disable_v3_hw(struct hisi_hba *hisi_hba)
-- 
1.9.1

Reply via email to