Hi Ryan,

On 2018/1/17 20:35, oscardagrach wrote:
> According to the hi6220 datasheet, the MMC controller is JEDEC eMMC 4.5
> compliant, in addition to supporting a clock of up to 150MHz. The Hikey
> schematic also indicates the device utilizes 1.8v signaling. Define these
> parameters in the device tree to enable HS200 mode.
> 
> Signed-off-by: Ryan Grachek <r...@edited.us>
> ---

Applied into hisilicon dt tree.
Thanks!

BR,
Wei

>  arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts 
> b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> index 3aee6123d161..964e43e05ac6 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> @@ -299,7 +299,9 @@
>               /* GPIO blocks 16 thru 19 do not appear to be routed to pins */
>  
>               dwmmc_0: dwmmc0@f723d000 {
> +                     max-frequency = <150000000>;
>                       cap-mmc-highspeed;
> +                     mmc-hs200-1_8v;
>                       non-removable;
>                       bus-width = <0x8>;
>                       vmmc-supply = <&ldo19>;
> 

Reply via email to