On 2.3.2018 19:50, Rob Herring wrote:
> On Fri, Feb 23, 2018 at 04:00:20PM +0100, Michal Simek wrote:
>> zc770 is based board which is extended by FMC/DC cards for SoC
>> validation. FMCs/DCs are supposed to cover all SoC configurations.
>> FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb.
>>
>> Signed-off-by: Michal Simek <michal.si...@xilinx.com>
>> ---
>>
>> Changes in v2:
>> - Record compatible string to xilinx.txt
>>
>> Documentation/devicetree/bindings/arm/xilinx.txt | 3 +
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/zynq-zc770-xm010.dts | 92
>> ++++++++++++++++++++++++
>> 3 files changed, 96 insertions(+)
>> create mode 100644 arch/arm/boot/dts/zynq-zc770-xm010.dts
>>
>> diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt
>> b/Documentation/devicetree/bindings/arm/xilinx.txt
>> index 425c74fcc560..019e69037d42 100644
>> --- a/Documentation/devicetree/bindings/arm/xilinx.txt
>> +++ b/Documentation/devicetree/bindings/arm/xilinx.txt
>> @@ -11,6 +11,9 @@ Additional compatible strings:
>> - Xilinx internal board cc108
>> "xlnx,zynq-cc108"
>>
>> +- Xilinx internal board zc770 with different FMC cards
>> + "xlnx,zynq-zc770-xm010"
>> +
>> ---------------------------------------------------------------
>>
>> Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index c6810e84d4d7..be9ffae2a1ec 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -1067,6 +1067,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
>> zynq-parallella.dtb \
>> zynq-zc702.dtb \
>> zynq-zc706.dtb \
>> + zynq-zc770-xm010.dtb \
>> zynq-zed.dtb \
>> zynq-zybo.dtb
>> dtb-$(CONFIG_MACH_ARMADA_370) += \
>> diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts
>> b/arch/arm/boot/dts/zynq-zc770-xm010.dts
>> new file mode 100644
>> index 000000000000..b1cfb4ede434
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts
>> @@ -0,0 +1,92 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Xilinx ZC770 XM010 board DTS
>> + *
>> + * Copyright (C) 2013-2018 Xilinx, Inc.
>> + */
>> +/dts-v1/;
>> +#include "zynq-7000.dtsi"
>> +
>> +/ {
>> + compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
>> + model = "Xilinx Zynq";
>> +
>> + aliases {
>> + ethernet0 = &gem0;
>> + i2c0 = &i2c0;
>> + serial0 = &uart1;
>> + spi1 = &spi1;
>> + };
>> +
>> + chosen {
>> + bootargs = "";
>> + stdout-path = "serial0:115200n8";
>> + };
>> +
>> + memory@0 {
>> + device_type = "memory";
>> + reg = <0x0 0x40000000>;
>> + };
>> +
>> + usb_phy0: phy0 {
>> + compatible = "usb-nop-xceiv";
>> + #phy-cells = <0>;
>> + };
>> +};
>> +
>> +&can0 {
>> + status = "okay";
>> +};
>> +
>> +&gem0 {
>> + status = "okay";
>> + phy-mode = "rgmii-id";
>> + phy-handle = <ðernet_phy>;
>> +
>> + ethernet_phy: ethernet-phy@7 {
>> + reg = <7>;
>> + device_type = "ethernet-phy";
>> + };
>> +};
>> +
>> +&i2c0 {
>> + status = "okay";
>> + clock-frequency = <400000>;
>> +
>> + eeprom: eeprom@52 {
>> + compatible = "atmel,24c02";
>> + reg = <0x52>;
>> + };
>> +
>> +};
>> +
>> +&sdhci0 {
>> + status = "okay";
>> +};
>> +
>> +&spi1 {
>> + status = "okay";
>> + num-cs = <4>;
>> + is-decoded-cs = <0>;
>> + flash@0 {
>> + compatible = "sst25wf080", "jedec,spi-nor";
>> + reg = <1>;
>> + spi-max-frequency = <1000000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + partition@test {
>
> @test?
>
> Use a partitions node too.ok done. > >> + label = "spi-flash"; > > Should be what the partition contains. I have fixed this to data. Thanks, M -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP SoCs
signature.asc
Description: OpenPGP digital signature
