Hi,

This patch series adds initial support for the Microsemi MIPS SoCs. It
is currently focusing on the Microsemi Ocelot (VSC7513, VSC7514).

Changes in v4:
 - dropped the reset driver as it has already been taken
 - Updated the MAINTAINERS entry (new files, changed email address)
 - moved to the MIPS generic infrastructure
 - corrected the cpu compatible in ocelot.dtsi

Alexandre Belloni (6):
  dt-bindings: Add vendor prefix for Microsemi Corporation
  dt-bindings: mips: Add bindings for Microsemi SoCs
  MIPS: mscc: add ocelot dtsi
  MIPS: mscc: add ocelot PCB123 device tree
  MIPS: generic: Add support for Microsemi Ocelot
  MAINTAINERS: Add entry for Microsemi MIPS SoCs

 Documentation/devicetree/bindings/mips/mscc.txt    |  44 +++++++++
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 MAINTAINERS                                        |   9 ++
 arch/mips/Makefile                                 |   4 +
 arch/mips/boot/dts/Makefile                        |   1 +
 arch/mips/boot/dts/mscc/Makefile                   |   3 +
 arch/mips/boot/dts/mscc/ocelot.dtsi                | 110 +++++++++++++++++++++
 arch/mips/boot/dts/mscc/ocelot_pcb123.dts          |  27 +++++
 arch/mips/configs/generic/board-ocelot.config      |  40 ++++++++
 arch/mips/generic/Kconfig                          |  17 ++++
 arch/mips/generic/Makefile                         |   1 +
 arch/mips/generic/board-ocelot.c                   |  83 ++++++++++++++++
 12 files changed, 340 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mips/mscc.txt
 create mode 100644 arch/mips/boot/dts/mscc/Makefile
 create mode 100644 arch/mips/boot/dts/mscc/ocelot.dtsi
 create mode 100644 arch/mips/boot/dts/mscc/ocelot_pcb123.dts
 create mode 100644 arch/mips/configs/generic/board-ocelot.config
 create mode 100644 arch/mips/generic/board-ocelot.c

-- 
2.16.2

Reply via email to