On Mon, Jan 15, 2018 at 06:28:44PM -0500, Jim Quinlan wrote:
> diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi
> b/arch/mips/boot/dts/brcm/bcm7425.dtsi
> index e4fb9b6..02168d0 100644
> --- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
> +++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
> @@ -495,4 +495,30 @@
> status = "disabled";
> };
> };
> +
> + pcie: pcie@10410000 {
> + reg = <0x10410000 0x830c>;
> + compatible = "brcm,bcm7425-pcie";
> + interrupts = <37>, <37>;
> + interrupt-names = "pcie", "msi";
> + interrupt-parent = <&periph_intc>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + linux,pci-domain = <0>;
> + brcm,enable-ssc;
> + bus-range = <0x00 0xff>;
> + msi-controller;
> + #interrupt-cells = <1>;
> + /* 4x128mb windows */
> + ranges = <0x2000000 0x0 0xd0000000 0xd0000000 0 0x08000000>,
> + <0x2000000 0x0 0xd8000000 0xd8000000 0 0x08000000>,
> + <0x2000000 0x0 0xe0000000 0xe0000000 0 0x08000000>,
> + <0x2000000 0x0 0xe8000000 0xe8000000 0 0x08000000>;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0 0 0 1 &periph_intc 33
> + 0 0 0 2 &periph_intc 34
> + 0 0 0 3 &periph_intc 35
> + 0 0 0 4 &periph_intc 36>;
no status = "disabled" like the other dtsi?
> + };
> +
> };
> diff --git a/arch/mips/boot/dts/brcm/bcm7435.dtsi
> b/arch/mips/boot/dts/brcm/bcm7435.dtsi
> index 1484e89..84881224 100644
> --- a/arch/mips/boot/dts/brcm/bcm7435.dtsi
> +++ b/arch/mips/boot/dts/brcm/bcm7435.dtsi
> @@ -510,4 +510,31 @@
> status = "disabled";
> };
> };
> +
> + pcie: pcie@10410000 {
> + reg = <0x10410000 0x930c>;
> + interrupts = <0x27>, <0x27>;
> + interrupt-names = "pcie", "msi";
> + interrupt-parent = <&periph_intc>;
> + compatible = "brcm,bcm7435-pcie";
Might be nice to be consistent in your property ordering between these
two dtsi files. I for one would prefer compatible to be near the top
too, if only for consistency with most other nodes in these files.
> + #address-cells = <3>;
> + #size-cells = <2>;
> + linux,pci-domain = <0>;
> + brcm,enable-ssc;
> + bus-range = <0x00 0xff>;
> + msi-controller;
> + #interrupt-cells = <1>;
> + /* 4x128mb windows */
> + ranges = <0x2000000 0x0 0xd0000000 0xd0000000 0 0x08000000>,
> + <0x2000000 0x0 0xd8000000 0xd8000000 0 0x08000000>,
> + <0x2000000 0x0 0xe0000000 0xe0000000 0 0x08000000>,
> + <0x2000000 0x0 0xe8000000 0xe8000000 0 0x08000000>;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0 0 0 1 &periph_intc 35
> + 0 0 0 2 &periph_intc 36
> + 0 0 0 3 &periph_intc 37
> + 0 0 0 4 &periph_intc 38>;
> + status = "disabled";
> + };
> +
> };
Cheers
James
signature.asc
Description: Digital signature
