Excerpts from gabriel.fernan...@st.com's message of March 8, 2018 8:53 am:
From: Gabriel Fernandez <gabriel.fernan...@st.com>
v2:
- Don't use MFD, use existing binding of STM32 RCC.
- Rework Peripheral and Kernel clocks
- cosmetic changes
This patch-set introduces clock driver for STM32MP157 based on Arm Cortex-A7.
The driver patch is split in several patches (by kind of clock) to facilitate
code reviewing.
Applied to clk-stm32mp1 towards v4.17.
Regards,
Mike
Gabriel Fernandez (12):
dt-bindings: Document STM32MP1 Reset Clock Controller (RCC) bindings
clk: stm32mp1: Introduce STM32MP1 clock driver
clk: stm32mp1: add MP1 gate for hse/hsi/csi oscillators
clk: stm32mp1: add Source Clocks for PLLs
clk: stm32mp1: add PLL clocks
clk: stm32mp1: add Post-dividers for PLL
clk: stm32mp1: add Sub System clocks
clk: stm32mp1: add Kernel timers
clk: stm32mp1: add Peripheral & Kernel Clocks
clk: stm32mp1: add RTC clock
clk: stm32mp1: add MCO clocks
clk: stm32mp1: add Debug clocks
.../devicetree/bindings/clock/st,stm32mp1-rcc.txt | 60 +
drivers/clk/Kconfig | 6 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-stm32mp1.c | 2117 ++++++++++++++++++++
include/dt-bindings/clock/stm32mp1-clks.h | 254 +++
5 files changed, 2438 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt
create mode 100644 drivers/clk/clk-stm32mp1.c
create mode 100644 include/dt-bindings/clock/stm32mp1-clks.h
--
1.9.1
