v4: Fix comments from Guenter
v3: Address comments from Guenter and Tomer, add Rob's review
v2: Address comments from Guenter and Marcus

This is a driver for the Poleg board that is in the process of being
upstreamed. I have tested it on an evaluation board.

The watchdog is a single register inside of the timer IP. This made me
think about how to describe the device tree bindings for a while, but
after some discussion I settled on describing the watchdog separately,
and giving it's own compatible string, and it's own driver.

The timer is being reviewed over here:


Joel Stanley (2):
  dt-bindings: watchdog: Add Nuvoton NPCM description
  watchdog: Add Nuvoton NPCM watchdog driver

 .../bindings/watchdog/nuvoton,npcm-wdt.txt         |  28 +++
 drivers/watchdog/Kconfig                           |  11 +
 drivers/watchdog/Makefile                          |   1 +
 drivers/watchdog/npcm_wdt.c                        | 254 +++++++++++++++++++++
 4 files changed, 294 insertions(+)
 create mode 100644 
 create mode 100644 drivers/watchdog/npcm_wdt.c


Reply via email to