Add resin key support to handle different types of key events
defined in different platforms.

Signed-off-by: Tirupathi Reddy <tirup...@codeaurora.org>
---
 .../bindings/input/qcom,pm8941-pwrkey.txt          | 20 ++++++-
 drivers/input/misc/pm8941-pwrkey.c                 | 65 +++++++++++++++++++++-
 2 files changed, 83 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt 
b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
index 07bf55f..f499cf8 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
+++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
@@ -20,6 +20,14 @@ PROPERTIES
                    defined by the binding document describing the node's
                    interrupt parent.
 
+- interrupt-names:
+       Usage: required
+       Value type: <stringlist>
+       Definition: Interrupt names.  This list must match up 1-to-1 with the
+                   interrupts specified in the 'interrupts' property. "kpdpwr"
+                   must be specified and should be the first entry of the list.
+                   "resin" may be specified for some platforms.
+
 - debounce:
        Usage: optional
        Value type: <u32>
@@ -32,12 +40,22 @@ PROPERTIES
        Definition: presence of this property indicates that the KPDPWR_N pin
                    should be configured for pull up.
 
+- linux,code:
+       Usage: required for "resin" key
+       Value type: <u32>
+       Definition: The input key-code associated with the resin key.
+                   Use the linux event codes defined in
+                   include/dt-bindings/input/linux-event-codes.h
+
 EXAMPLE
 
        pwrkey@800 {
                compatible = "qcom,pm8941-pwrkey";
                reg = <0x800>;
-               interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+               interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>,
+                            <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+               interrupt-names = "kpdpwr", "resin";
                debounce = <15625>;
                bias-pull-up;
+               linux,code = <KEY_VOLUMEDOWN>;
        };
diff --git a/drivers/input/misc/pm8941-pwrkey.c 
b/drivers/input/misc/pm8941-pwrkey.c
index 18ad956..2fffc7c 100644
--- a/drivers/input/misc/pm8941-pwrkey.c
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -28,6 +28,7 @@
 
 #define PON_RT_STS                     0x10
 #define  PON_KPDPWR_N_SET              BIT(0)
+#define  PON_RESIN_N_SET               BIT(1)
 
 #define PON_PS_HOLD_RST_CTL            0x5a
 #define PON_PS_HOLD_RST_CTL2           0x5b
@@ -46,6 +47,7 @@
 struct pm8941_pwrkey {
        struct device *dev;
        int irq;
+       u32 resin_key_code;
        u32 baseaddr;
        struct regmap *regmap;
        struct input_dev *input;
@@ -130,6 +132,24 @@ static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
        return IRQ_HANDLED;
 }
 
+static irqreturn_t pm8941_resinkey_irq(int irq, void *_data)
+{
+       struct pm8941_pwrkey *pwrkey = _data;
+       unsigned int sts;
+       int error;
+
+       error = regmap_read(pwrkey->regmap,
+                           pwrkey->baseaddr + PON_RT_STS, &sts);
+       if (error)
+               return IRQ_HANDLED;
+
+       input_report_key(pwrkey->input, pwrkey->resin_key_code,
+                        !!(sts & PON_RESIN_N_SET));
+       input_sync(pwrkey->input);
+
+       return IRQ_HANDLED;
+}
+
 static int __maybe_unused pm8941_pwrkey_suspend(struct device *dev)
 {
        struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
@@ -153,12 +173,40 @@ static int __maybe_unused pm8941_pwrkey_resume(struct 
device *dev)
 static SIMPLE_DEV_PM_OPS(pm8941_pwr_key_pm_ops,
                         pm8941_pwrkey_suspend, pm8941_pwrkey_resume);
 
+static int pm8941_resin_key_init(struct pm8941_pwrkey *pwrkey, int irq)
+{
+       int error;
+
+       /*
+        * Get the standard-key parameters. This might not be
+        * specified if there is no key mapping on the reset line.
+        */
+       error = of_property_read_u32(pwrkey->dev->of_node, "linux,code",
+                       &pwrkey->resin_key_code);
+       if (error) {
+               dev_err(pwrkey->dev, "failed to read key-code for resin key\n");
+               return error;
+       }
+
+       /* Register key configuration */
+       input_set_capability(pwrkey->input, EV_KEY, pwrkey->resin_key_code);
+
+       error = devm_request_threaded_irq(pwrkey->dev, irq, NULL,
+                                         pm8941_resinkey_irq, IRQF_ONESHOT,
+                                         "pm8941_resinkey", pwrkey);
+       if (error)
+               dev_err(pwrkey->dev, "failed requesting resin key IRQ: %d\n",
+                       error);
+
+       return error;
+}
+
 static int pm8941_pwrkey_probe(struct platform_device *pdev)
 {
        struct pm8941_pwrkey *pwrkey;
        bool pull_up;
        u32 req_delay;
-       int error;
+       int error, resin_irq;
 
        if (of_property_read_u32(pdev->dev.of_node, "debounce", &req_delay))
                req_delay = 15625;
@@ -241,6 +289,21 @@ static int pm8941_pwrkey_probe(struct platform_device 
*pdev)
                return error;
        }
 
+       resin_irq = platform_get_irq_byname(pdev, "resin");
+       if (resin_irq < 0 && resin_irq != -ENXIO) {
+               if (resin_irq != -EPROBE_DEFER)
+                       dev_err(&pdev->dev, "failed to get resin irq\n");
+               return resin_irq;
+       } else if (resin_irq >= 0) {
+               /* resin key capabilities are defined in device node */
+               error = pm8941_resin_key_init(pwrkey, resin_irq);
+               if (error) {
+                       dev_err(&pdev->dev, "failed resin key initialization: 
%d\n",
+                               error);
+                       return error;
+               }
+       }
+
        error = input_register_device(pwrkey->input);
        if (error) {
                dev_err(&pdev->dev, "failed to register input device: %d\n",
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of 
Code Aurora Forum, hosted by The Linux Foundation

Reply via email to