From: Thierry Escande <thierry.esca...@collabora.com>
Add a new serial node for the Qualcomm BT controller QCA6174. This
allows automatic probing and hci registration through the serdev
framework instead of relying on the userspace helpers.
Signed-off-by: Thierry Escande <thierry.esca...@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi | 14 ++++++++++
.../boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi | 17 ++++++++++++
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 32 ++++++++++++++++++++++
arch/arm64/boot/dts/qcom/msm8996.dtsi | 10 +++++++
4 files changed, 73 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
index 24552f19b3fa..172165d84669 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
@@ -36,4 +36,18 @@
drive-strength = <2>; /* 2 MA */
};
};
+
+ blsp1_uart1_default: blsp1_uart1_default {
+ function = "blsp_uart2";
+ pins = "gpio41", "gpio42", "gpio43", "gpio44";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp1_uart1_sleep: blsp1_uart1_sleep {
+ function = "gpio";
+ pins = "gpio41", "gpio42", "gpio43", "gpio44";
+ drive-strength = <2>;
+ bias-disable;
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
index 59b29ddfb6e9..f8d2a3b10b1f 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
@@ -26,6 +26,23 @@
};
};
+ divclk4_pin_a: divclk4 {
+ pins = "gpio18";
+ function = "func2";
+
+ bias-disable;
+ power-source = <PM8994_GPIO_S4>;
+ };
+
+ bt_en_pin_a: bt-en-active {
+ pins = "gpio19";
+ function = "normal";
+
+ output-low;
+ power-source = <PM8994_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+
usb3_vbus_det_gpio: pm8996_gpio22 {
pinconf {
pins = "gpio22";
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 1c8f1b86472d..b05d6bc0b856 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -23,6 +23,7 @@
aliases {
serial0 = &blsp2_uart1;
serial1 = &blsp2_uart2;
+ serial2 = &blsp1_uart1;
i2c0 = &blsp1_i2c2;
i2c1 = &blsp2_i2c1;
i2c2 = &blsp2_i2c0;
@@ -34,7 +35,38 @@
stdout-path = "serial0:115200n8";
};
+ clocks {
+ divclk4: divclk4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "divclk4";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&divclk4_pin_a>;
+ };
+ };
+
soc {
+ serial@7570000 {
+ label = "BT-UART";
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_uart1_default>;
+ pinctrl-1 = <&blsp1_uart1_sleep>;
+
+ bluetooth {
+ compatible = "qcom,qca6174-bt";
+
+ bt-disable-n-gpios = <&pm8994_gpios 19
GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_en_pin_a>;
+
+ clocks = <&divclk4>;
+ };
+ };
+
serial@75b0000 {
label = "LS-UART1";
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi
b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 0a6f7952bbb1..2d54a86a027f 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -408,6 +408,16 @@
#clock-cells = <1>;
};
+ blsp1_uart1: serial@7570000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x07570000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
blsp1_spi0: spi@7575000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x07575000 0x600>;
--
2.14.1
