Add rpmpd device node and its OPP table
Signed-off-by: Rajendra Nayak <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 46 +++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi
b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 0a6f7952bbb1..43757a078146 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -297,6 +297,52 @@
#clock-cells = <1>;
};
+ rpmpd: qcom,rpmpd {
+ compatible = "qcom,rpmpd-msm8996";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>, /* cx
*/
+ <&rpmpd_opp_table>, /*
cx_ao */
+ <&rpmpd_opp_table>, /*
cx_vfc */
+ <&rpmpd_opp_table>, /* mx
*/
+ <&rpmpd_opp_table>, /*
mx_ao */
+ <&rpmpd_opp_table>, /*
sscx */
+ <&rpmpd_opp_table>; /*
sscx_vfc */
+ };
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2",
"operating-points-v2-qcom";
+
+ rpmpd_opp1: opp@1 {
+ opp-hz = /bits/ 64 <1>;
+ qcom,level = <1>;
+ };
+
+ rpmpd_opp2: opp@2 {
+ opp-hz = /bits/ 64 <2>;
+ qcom,level = <2>;
+ };
+
+ rpmpd_opp3: opp@3 {
+ opp-hz = /bits/ 64 <3>;
+ qcom,level = <3>;
+ };
+
+ rpmpd_opp4: opp@4 {
+ opp-hz = /bits/ 64 <4>;
+ qcom,level = <4>;
+ };
+
+ rpmpd_opp5: opp@5 {
+ opp-hz = /bits/ 64 <5>;
+ qcom,level = <5>;
+ };
+
+ rpmpd_opp6: opp@6 {
+ opp-hz = /bits/ 64 <6>;
+ qcom,level = <6>;
+ };
+ };
+
pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
