This patch adds syscon property for specifying soc-glue core into device-tree of LD11/LD20 SoC.
Currently, soc-glue core is used for changing the state of S/PDIF signal output pin to signal output state or Hi-Z state. Signed-off-by: Katsuhiro Suzuki <[email protected]> --- arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi | 3 ++- arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index efa95573b2aa..e62bda1cf2d9 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -197,6 +197,7 @@ reset-names = "aio"; resets = <&sys_rst 40>; #sound-dai-cells = <1>; + socionext,syscon = <&soc_glue>; i2s_port0: port@0 { i2s_hdmi: endpoint { @@ -479,7 +480,7 @@ }; }; - soc-glue@5f800000 { + soc_glue: soc-glue@5f800000 { compatible = "socionext,uniphier-ld11-soc-glue", "simple-mfd", "syscon"; reg = <0x5f800000 0x2000>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 19c935688a77..9efe20d07589 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -297,6 +297,7 @@ reset-names = "aio"; resets = <&sys_rst 40>; #sound-dai-cells = <1>; + socionext,syscon = <&soc_glue>; i2s_port0: port@0 { i2s_hdmi: endpoint { @@ -525,7 +526,7 @@ cdns,phy-dll-delay-sdclk-hsmmc = <21>; }; - soc-glue@5f800000 { + soc_glue: soc-glue@5f800000 { compatible = "socionext,uniphier-ld20-soc-glue", "simple-mfd", "syscon"; reg = <0x5f800000 0x2000>; -- 2.16.2
