The AD5694/AD5694R/AD5695R/AD5696/AD5696R are a family of 4 channel DAC s with 12-bit, 14-bit and 16-bit precision respectively. The devices have either no built-in reference, or built-in 2.5V reference.
The AD5671R/AD5675R are similar, except that they have 8 instead of 4 channels. These devices are similar to AD5672R/AD5676/AD5676R and AD5684/AD5684R/AD5684/AD5685R/AD5686/AD5686R, except that they use i2c instead of spi. In order to add support in the previously existing driver, three modules were created. One baseline module that has all the chip-logic and then one module for SPI and one for I2C. Datasheets: http://www.analog.com/media/en/technical-documentation/data-sheets/AD5671R_5675R.pdf http://www.analog.com/media/en/technical-documentation/data-sheets/AD5696R_5695R_5694R.pdf Signed-off-by: Stefan Popa <stefan.p...@analog.com> --- MAINTAINERS | 8 ++ drivers/iio/dac/Kconfig | 27 ++++-- drivers/iio/dac/ad5686-spi.c | 93 ++++++++++++++++++ drivers/iio/dac/ad5686.c | 222 +++++++++++++------------------------------ drivers/iio/dac/ad5686.h | 114 ++++++++++++++++++++++ drivers/iio/dac/ad5696-i2c.c | 98 +++++++++++++++++++ 6 files changed, 400 insertions(+), 162 deletions(-) create mode 100644 drivers/iio/dac/ad5686-spi.c create mode 100644 drivers/iio/dac/ad5686.h create mode 100644 drivers/iio/dac/ad5696-i2c.c diff --git a/MAINTAINERS b/MAINTAINERS index 473ac00..002cb01 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -791,6 +791,14 @@ M: Michael Hanselmann <linux-ker...@hansmi.ch> S: Supported F: drivers/macintosh/ams/ +ANALOG DEVICES INC AD5686 DRIVER +M: Stefan Popa <stefan.p...@analog.com> +L: linux...@vger.kernel.org +W: http://ez.analog.com/community/linux-device-drivers +S: Supported +F: drivers/iio/dac/ad5686* +F: drivers/iio/dac/ad5696* + ANALOG DEVICES INC AD9389B DRIVER M: Hans Verkuil <hans.verk...@cisco.com> L: linux-me...@vger.kernel.org diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index 965d5c0..dab0b8a 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -131,15 +131,30 @@ config LTC2632 module will be called ltc2632. config AD5686 - tristate "Analog Devices AD5686R/AD5685R/AD5684R DAC SPI driver" + tristate + +config AD5686_SPI + tristate "Analog Devices AD5686 and similar multi-channel DACs (SPI)" depends on SPI + select AD5686 help - Say yes here to build support for Analog Devices AD5686R, AD5685R, - AD5684R, AD5791 Voltage Output Digital to - Analog Converter. + Say yes here to build support for Analog Devices AD5672R, AD5676, + AD5676R, AD5684, AD5684R, AD5684R, AD5685R, AD5686, AD5686R. + Voltage Output Digital to Analog Converter. - To compile this driver as a module, choose M here: the - module will be called ad5686. + To compile this driver as a module, choose M here: the + module will be called ad5686. + +config AD5696_I2C + tristate "Analog Devices AD5696 and similar multi-channel DACs (I2C)" + depends on I2C + select AD5686 + help + Say yes here to build support for Analog Devices AD5671R, AD5675R, + AD5694, AD5694R, AD5695R, AD5696, AD5696R Voltage Output Digital to + Analog Converter. + To compile this driver as a module, choose M here: the module will be + called ad5696. config AD5755 tristate "Analog Devices AD5755/AD5755-1/AD5757/AD5735/AD5737 DAC driver" diff --git a/drivers/iio/dac/ad5686-spi.c b/drivers/iio/dac/ad5686-spi.c new file mode 100644 index 0000000..d68579b --- /dev/null +++ b/drivers/iio/dac/ad5686-spi.c @@ -0,0 +1,93 @@ +/* + * AD5672R, AD5676, AD5676R, AD5684, AD5684R, AD5684R, AD5685R, AD5686, AD5686R + * Digital to analog converters driver + * + * Copyright 2018 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#include "ad5686.h" + +#include <linux/module.h> +#include <linux/spi/spi.h> + +static int ad5686_spi_write(struct ad5686_state *st, + u8 cmd, u8 addr, u16 val) +{ + struct spi_device *spi = to_spi_device(st->dev); + + st->data[0].d32 = cpu_to_be32(AD5686_CMD(cmd) | + AD5686_ADDR(addr) | + val); + + return spi_write(spi, &st->data[0].d8[1], 3); +} + +static int ad5686_spi_read(struct ad5686_state *st, u8 addr) +{ + struct spi_transfer t[] = { + { + .tx_buf = &st->data[0].d8[1], + .len = 3, + .cs_change = 1, + }, { + .tx_buf = &st->data[1].d8[1], + .rx_buf = &st->data[2].d8[1], + .len = 3, + }, + }; + struct spi_device *spi = to_spi_device(st->dev); + int ret; + + st->data[0].d32 = cpu_to_be32(AD5686_CMD(AD5686_CMD_READBACK_ENABLE) | + AD5686_ADDR(addr)); + st->data[1].d32 = cpu_to_be32(AD5686_CMD(AD5686_CMD_NOOP)); + + ret = spi_sync_transfer(spi, t, ARRAY_SIZE(t)); + if (ret < 0) + return ret; + + return be32_to_cpu(st->data[2].d32); +} + +static int ad5686_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + + return ad5686_probe(&spi->dev, id->driver_data, id->name, + ad5686_spi_write, ad5686_spi_read); +} + +static int ad5686_spi_remove(struct spi_device *spi) +{ + return ad5686_remove(&spi->dev); +} + +static const struct spi_device_id ad5686_spi_id[] = { + {"ad5672r", ID_AD5672R}, + {"ad5676", ID_AD5676}, + {"ad5676r", ID_AD5676R}, + {"ad5684", ID_AD5684}, + {"ad5684r", ID_AD5684R}, + {"ad5685r", ID_AD5685R}, + {"ad5686", ID_AD5686}, + {"ad5686r", ID_AD5686R}, + {} +}; +MODULE_DEVICE_TABLE(spi, ad5686_spi_id); + +static struct spi_driver ad5686_spi_driver = { + .driver = { + .name = "ad5686", + }, + .probe = ad5686_spi_probe, + .remove = ad5686_spi_remove, + .id_table = ad5686_spi_id, +}; + +module_spi_driver(ad5686_spi_driver); + +MODULE_AUTHOR("Stefan Popa <stefan.p...@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD5686 and similar multi-channel DACs"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/dac/ad5686.c b/drivers/iio/dac/ad5686.c index 5fb0179..e4ea0dc 100644 --- a/drivers/iio/dac/ad5686.c +++ b/drivers/iio/dac/ad5686.c @@ -11,7 +11,6 @@ #include <linux/device.h> #include <linux/module.h> #include <linux/kernel.h> -#include <linux/spi/spi.h> #include <linux/slab.h> #include <linux/sysfs.h> #include <linux/regulator/consumer.h> @@ -19,128 +18,28 @@ #include <linux/iio/iio.h> #include <linux/iio/sysfs.h> -#define AD5686_ADDR(x) ((x) << 16) -#define AD5686_CMD(x) ((x) << 20) - -#define AD5686_ADDR_DAC(chan) (0x1 << (chan)) -#define AD5686_ADDR_ALL_DAC 0xF - -#define AD5686_CMD_NOOP 0x0 -#define AD5686_CMD_WRITE_INPUT_N 0x1 -#define AD5686_CMD_UPDATE_DAC_N 0x2 -#define AD5686_CMD_WRITE_INPUT_N_UPDATE_N 0x3 -#define AD5686_CMD_POWERDOWN_DAC 0x4 -#define AD5686_CMD_LDAC_MASK 0x5 -#define AD5686_CMD_RESET 0x6 -#define AD5686_CMD_INTERNAL_REFER_SETUP 0x7 -#define AD5686_CMD_DAISY_CHAIN_ENABLE 0x8 -#define AD5686_CMD_READBACK_ENABLE 0x9 - -#define AD5686_LDAC_PWRDN_NONE 0x0 -#define AD5686_LDAC_PWRDN_1K 0x1 -#define AD5686_LDAC_PWRDN_100K 0x2 -#define AD5686_LDAC_PWRDN_3STATE 0x3 - -/** - * struct ad5686_chip_info - chip specific information - * @int_vref_mv: AD5620/40/60: the internal reference voltage - * @num_channels: number of channels - * @channel: channel specification -*/ - -struct ad5686_chip_info { - u16 int_vref_mv; - unsigned int num_channels; - struct iio_chan_spec *channels; -}; - -/** - * struct ad5446_state - driver instance specific data - * @spi: spi_device - * @chip_info: chip model specific constants, available modes etc - * @reg: supply regulator - * @vref_mv: actual reference voltage used - * @pwr_down_mask: power down mask - * @pwr_down_mode: current power down mode - * @data: spi transfer buffers - */ +#include "ad5686.h" -struct ad5686_state { - struct spi_device *spi; - const struct ad5686_chip_info *chip_info; - struct regulator *reg; - unsigned short vref_mv; - unsigned pwr_down_mask; - unsigned pwr_down_mode; - /* - * DMA (thus cache coherency maintenance) requires the - * transfer buffers to live in their own cache lines. - */ - - union { - __be32 d32; - u8 d8[4]; - } data[3] ____cacheline_aligned; +static const char * const ad5686_powerdown_modes[] = { + "1kohm_to_gnd", + "100kohm_to_gnd", + "three_state" }; -/** - * ad5686_supported_device_ids: - */ - -enum ad5686_supported_device_ids { - ID_AD5672R, - ID_AD5676, - ID_AD5676R, - ID_AD5684, - ID_AD5684R, - ID_AD5685R, - ID_AD5686, - ID_AD5686R -}; -static int ad5686_spi_write(struct ad5686_state *st, - u8 cmd, u8 addr, u16 val, u8 shift) +static int ad5686_write(struct ad5686_state *st, + u8 cmd, u8 addr, u16 val, u8 shift) { val <<= shift; - st->data[0].d32 = cpu_to_be32(AD5686_CMD(cmd) | - AD5686_ADDR(addr) | - val); - - return spi_write(st->spi, &st->data[0].d8[1], 3); + return st->write(st, cmd, addr, val); } -static int ad5686_spi_read(struct ad5686_state *st, u8 addr) +static int ad5686_read(struct ad5686_state *st, u8 addr) { - struct spi_transfer t[] = { - { - .tx_buf = &st->data[0].d8[1], - .len = 3, - .cs_change = 1, - }, { - .tx_buf = &st->data[1].d8[1], - .rx_buf = &st->data[2].d8[1], - .len = 3, - }, - }; - int ret; - st->data[0].d32 = cpu_to_be32(AD5686_CMD(AD5686_CMD_READBACK_ENABLE) | - AD5686_ADDR(addr)); - st->data[1].d32 = cpu_to_be32(AD5686_CMD(AD5686_CMD_NOOP)); - - ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t)); - if (ret < 0) - return ret; - - return be32_to_cpu(st->data[2].d32); + return st->read(st, addr); } -static const char * const ad5686_powerdown_modes[] = { - "1kohm_to_gnd", - "100kohm_to_gnd", - "three_state" -}; - static int ad5686_get_powerdown_mode(struct iio_dev *indio_dev, const struct iio_chan_spec *chan) { @@ -196,8 +95,8 @@ static ssize_t ad5686_write_dac_powerdown(struct iio_dev *indio_dev, else st->pwr_down_mask &= ~(0x3 << (chan->channel * 2)); - ret = ad5686_spi_write(st, AD5686_CMD_POWERDOWN_DAC, 0, - st->pwr_down_mask & st->pwr_down_mode, 0); + ret = ad5686_write(st, AD5686_CMD_POWERDOWN_DAC, 0, + st->pwr_down_mask & st->pwr_down_mode, 0); return ret ? ret : len; } @@ -214,7 +113,7 @@ static int ad5686_read_raw(struct iio_dev *indio_dev, switch (m) { case IIO_CHAN_INFO_RAW: mutex_lock(&indio_dev->mlock); - ret = ad5686_spi_read(st, chan->address); + ret = ad5686_read(st, chan->address); mutex_unlock(&indio_dev->mlock); if (ret < 0) return ret; @@ -243,11 +142,11 @@ static int ad5686_write_raw(struct iio_dev *indio_dev, return -EINVAL; mutex_lock(&indio_dev->mlock); - ret = ad5686_spi_write(st, - AD5686_CMD_WRITE_INPUT_N_UPDATE_N, - chan->address, - val, - chan->scan_type.shift); + ret = ad5686_write(st, + AD5686_CMD_WRITE_INPUT_N_UPDATE_N, + chan->address, + val, + chan->scan_type.shift); mutex_unlock(&indio_dev->mlock); break; default: @@ -318,11 +217,21 @@ DECLARE_AD5686_CHANNELS(ad5685r_channels, 14, 2); DECLARE_AD5686_CHANNELS(ad5686_channels, 16, 0); static const struct ad5686_chip_info ad5686_chip_info_tbl[] = { + [ID_AD5671R] = { + .channels = ad5672_channels, + .int_vref_mv = 2500, + .num_channels = 8, + }, [ID_AD5672R] = { .channels = ad5672_channels, .int_vref_mv = 2500, .num_channels = 8, }, + [ID_AD5675R] = { + .channels = ad5676_channels, + .int_vref_mv = 2500, + .num_channels = 8, + }, [ID_AD5676] = { .channels = ad5676_channels, .num_channels = 8, @@ -355,22 +264,47 @@ static const struct ad5686_chip_info ad5686_chip_info_tbl[] = { .int_vref_mv = 2500, .num_channels = 4, }, + [ID_AD5694] = { + .channels = ad5684_channels, + .num_channels = 4, + }, + [ID_AD5694R] = { + .channels = ad5684_channels, + .int_vref_mv = 2500, + .num_channels = 4, + }, + [ID_AD5696] = { + .channels = ad5686_channels, + .num_channels = 4, + }, + [ID_AD5696R] = { + .channels = ad5686_channels, + .int_vref_mv = 2500, + .num_channels = 4, + }, }; -static int ad5686_probe(struct spi_device *spi) +int ad5686_probe(struct device *dev, + enum ad5686_supported_device_ids chip_type, + const char *name, ad5686_write_func write, + ad5686_read_func read) { struct ad5686_state *st; struct iio_dev *indio_dev; int ret, voltage_uv = 0; - indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); if (indio_dev == NULL) return -ENOMEM; st = iio_priv(indio_dev); - spi_set_drvdata(spi, indio_dev); + dev_set_drvdata(dev, indio_dev); + + st->dev = dev; + st->write = write; + st->read = read; - st->reg = devm_regulator_get_optional(&spi->dev, "vcc"); + st->reg = devm_regulator_get_optional(dev, "vcc"); if (!IS_ERR(st->reg)) { ret = regulator_enable(st->reg); if (ret) @@ -383,28 +317,25 @@ static int ad5686_probe(struct spi_device *spi) voltage_uv = ret; } - st->chip_info = - &ad5686_chip_info_tbl[spi_get_device_id(spi)->driver_data]; + st->chip_info = &ad5686_chip_info_tbl[chip_type]; if (voltage_uv) st->vref_mv = voltage_uv / 1000; else st->vref_mv = st->chip_info->int_vref_mv; - st->spi = spi; - /* Set all the power down mode for all channels to 1K pulldown */ st->pwr_down_mode = 0x55; - indio_dev->dev.parent = &spi->dev; - indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->dev.parent = dev; + indio_dev->name = name; indio_dev->info = &ad5686_info; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = st->chip_info->channels; indio_dev->num_channels = st->chip_info->num_channels; - ret = ad5686_spi_write(st, AD5686_CMD_INTERNAL_REFER_SETUP, 0, - !!voltage_uv, 0); + ret = ad5686_write(st, AD5686_CMD_INTERNAL_REFER_SETUP, + 0, !!voltage_uv, 0); if (ret) goto error_disable_reg; @@ -419,10 +350,11 @@ static int ad5686_probe(struct spi_device *spi) regulator_disable(st->reg); return ret; } +EXPORT_SYMBOL_GPL(ad5686_probe); -static int ad5686_remove(struct spi_device *spi) +int ad5686_remove(struct device *dev) { - struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ad5686_state *st = iio_priv(indio_dev); iio_device_unregister(indio_dev); @@ -431,29 +363,7 @@ static int ad5686_remove(struct spi_device *spi) return 0; } - -static const struct spi_device_id ad5686_id[] = { - {"ad5672r", ID_AD5672R}, - {"ad5676", ID_AD5676}, - {"ad5676r", ID_AD5676R}, - {"ad5684", ID_AD5684}, - {"ad5684r", ID_AD5684R}, - {"ad5685r", ID_AD5685R}, - {"ad5686", ID_AD5686}, - {"ad5686r", ID_AD5686R}, - {} -}; -MODULE_DEVICE_TABLE(spi, ad5686_id); - -static struct spi_driver ad5686_driver = { - .driver = { - .name = "ad5686", - }, - .probe = ad5686_probe, - .remove = ad5686_remove, - .id_table = ad5686_id, -}; -module_spi_driver(ad5686_driver); +EXPORT_SYMBOL_GPL(ad5686_remove); MODULE_AUTHOR("Michael Hennerich <henner...@blackfin.uclinux.org>"); MODULE_DESCRIPTION("Analog Devices AD5686/85/84 DAC"); diff --git a/drivers/iio/dac/ad5686.h b/drivers/iio/dac/ad5686.h new file mode 100644 index 0000000..b2b0110 --- /dev/null +++ b/drivers/iio/dac/ad5686.h @@ -0,0 +1,114 @@ +#ifndef __DRIVERS_IIO_DAC_AD5686_H__ +#define __DRIVERS_IIO_DAC_AD5686_H__ + +#include <linux/types.h> +#include <linux/cache.h> +#include <linux/mutex.h> +#include <linux/kernel.h> + +#define AD5686_ADDR(x) ((x) << 16) +#define AD5686_CMD(x) ((x) << 20) + +#define AD5686_ADDR_DAC(chan) (0x1 << (chan)) +#define AD5686_ADDR_ALL_DAC 0xF + +#define AD5686_CMD_NOOP 0x0 +#define AD5686_CMD_WRITE_INPUT_N 0x1 +#define AD5686_CMD_UPDATE_DAC_N 0x2 +#define AD5686_CMD_WRITE_INPUT_N_UPDATE_N 0x3 +#define AD5686_CMD_POWERDOWN_DAC 0x4 +#define AD5686_CMD_LDAC_MASK 0x5 +#define AD5686_CMD_RESET 0x6 +#define AD5686_CMD_INTERNAL_REFER_SETUP 0x7 +#define AD5686_CMD_DAISY_CHAIN_ENABLE 0x8 +#define AD5686_CMD_READBACK_ENABLE 0x9 + +#define AD5686_LDAC_PWRDN_NONE 0x0 +#define AD5686_LDAC_PWRDN_1K 0x1 +#define AD5686_LDAC_PWRDN_100K 0x2 +#define AD5686_LDAC_PWRDN_3STATE 0x3 + +/** + * ad5686_supported_device_ids: + */ +enum ad5686_supported_device_ids { + ID_AD5671R, + ID_AD5672R, + ID_AD5675R, + ID_AD5676, + ID_AD5676R, + ID_AD5684, + ID_AD5684R, + ID_AD5685R, + ID_AD5686, + ID_AD5686R, + ID_AD5694, + ID_AD5694R, + ID_AD5695R, + ID_AD5696, + ID_AD5696R, +}; + +struct ad5686_state; + +typedef int (*ad5686_write_func)(struct ad5686_state *st, + u8 cmd, u8 addr, u16 val); + +typedef int (*ad5686_read_func)(struct ad5686_state *st, u8 addr); + +/** + * struct ad5686_chip_info - chip specific information + * @int_vref_mv: AD5620/40/60: the internal reference voltage + * @num_channels: number of channels + * @channel: channel specification + */ + +struct ad5686_chip_info { + u16 int_vref_mv; + unsigned int num_channels; + struct iio_chan_spec *channels; +}; + +/** + * struct ad5446_state - driver instance specific data + * @spi: spi_device + * @chip_info: chip model specific constants, available modes etc + * @reg: supply regulator + * @vref_mv: actual reference voltage used + * @pwr_down_mask: power down mask + * @pwr_down_mode: current power down mode + * @data: spi transfer buffers + */ + +struct ad5686_state { + struct device *dev; + const struct ad5686_chip_info *chip_info; + struct regulator *reg; + unsigned short vref_mv; + unsigned int pwr_down_mask; + unsigned int pwr_down_mode; + ad5686_write_func write; + ad5686_read_func read; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + + union { + __be32 d32; + __be16 d16; + u8 d8[4]; + } data[3] ____cacheline_aligned; +}; + + +int ad5686_probe(struct device *dev, + enum ad5686_supported_device_ids chip_type, + const char *name, ad5686_write_func write, + ad5686_read_func read); + +int ad5686_remove(struct device *dev); + + +#endif /* __DRIVERS_IIO_DAC_AD5686_H__ */ diff --git a/drivers/iio/dac/ad5696-i2c.c b/drivers/iio/dac/ad5696-i2c.c new file mode 100644 index 0000000..c9187de --- /dev/null +++ b/drivers/iio/dac/ad5696-i2c.c @@ -0,0 +1,98 @@ +/* + * AD5671R, AD5675R, AD5694, AD5694R, AD5695R, AD5696, AD5696R + * Digital to analog converters driver + * + * Copyright 2018 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#include "ad5686.h" + +#include <linux/module.h> +#include <linux/i2c.h> + +static int ad5686_i2c_read(struct ad5686_state *st, u8 addr) +{ + struct i2c_client *i2c = to_i2c_client(st->dev); + struct i2c_msg msg[2] = { + { + .addr = i2c->addr, + .flags = i2c->flags, + .len = 3, + .buf = &st->data[0].d8[1], + }, + { + .addr = i2c->addr, + .flags = i2c->flags | I2C_M_RD, + .len = 2, + .buf = (char *)&st->data[0].d16, + }, + }; + int ret; + + st->data[0].d32 = cpu_to_be32(AD5686_CMD(AD5686_CMD_NOOP) | + AD5686_ADDR(addr) | + 0x00); + + ret = i2c_transfer(i2c->adapter, msg, 2); + if (ret < 0) + return ret; + + return be16_to_cpu(st->data[0].d16); +} + +static int ad5686_i2c_write(struct ad5686_state *st, + u8 cmd, u8 addr, u16 val) +{ + struct i2c_client *i2c = to_i2c_client(st->dev); + int ret; + + st->data[0].d32 = cpu_to_be32(AD5686_CMD(cmd) | AD5686_ADDR(addr) + | val); + + ret = i2c_master_send(i2c, &st->data[0].d8[1], 3); + if (ret < 0) + return ret; + + return (ret != 3) ? -EIO : 0; +} + +static int ad5686_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + return ad5686_probe(&i2c->dev, id->driver_data, id->name, + ad5686_i2c_write, ad5686_i2c_read); +} + +static int ad5686_i2c_remove(struct i2c_client *i2c) +{ + return ad5686_remove(&i2c->dev); +} + +static const struct i2c_device_id ad5686_i2c_id[] = { + {"ad5671r", ID_AD5671R}, + {"ad5675r", ID_AD5675R}, + {"ad5694", ID_AD5694}, + {"ad5694r", ID_AD5694R}, + {"ad5695r", ID_AD5695R}, + {"ad5696", ID_AD5696}, + {"ad5696r", ID_AD5696R}, + {} +}; +MODULE_DEVICE_TABLE(i2c, i2c_device_id); + +static struct i2c_driver ad5686_i2c_driver = { + .driver = { + .name = "ad5696", + }, + .probe = ad5686_i2c_probe, + .remove = ad5686_i2c_remove, + .id_table = ad5686_i2c_id, +}; + +module_i2c_driver(ad5686_i2c_driver); + +MODULE_AUTHOR("Stefan Popa <stefan.p...@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD5686 and similar multi-channel DACs"); +MODULE_LICENSE("GPL v2"); -- 2.7.4
