On Mon, 2018-03-19 at 19:05 +0100, Greg Kroah-Hartman wrote: > 4.4-stable review patch. If anyone has any objections, please let me know. > > ------------------ > > From: John Stultz <[email protected]> > > > [ Upstream commit dad3f793f20fbb5c0c342f0f5a0bdf69a4d76089 ]
Maybe we should also have: commit d2471d4a24dfbff5e463d382e2c6fec7d7e25a09 Author: John Stultz <[email protected]> Date: Mon Oct 23 14:32:48 2017 -0700 usb: dwc2: Improve gadget state disconnection handling Ben. > I had seen some odd behavior with HiKey's usb-gadget interface > that I finally seemed to have chased down. Basically every other > time I plugged in the OTG port, the gadget interface would > properly initialize. The other times, I'd get a big WARN_ON > in dwc2_hsotg_init_fifo() about the fifo_map not being clear. > > Ends up if we don't disconnect the gadget state, the fifo-map > doesn't get cleared properly, which causes WARN_ON messages and > also results in the device not properly being setup as a gadget > every other time the OTG port is connected. > > So this patch adds a call to dwc2_hsotg_disconnect() in the > reset path so the state is properly cleared. > > With it, the gadget interface initializes properly on every > plug in. > > Cc: Wei Xu <[email protected]> > Cc: Guodong Xu <[email protected]> > Cc: Amit Pundir <[email protected]> > Cc: Rob Herring <[email protected]> > Cc: John Youn <[email protected]> > Cc: Douglas Anderson <[email protected]> > Cc: Chen Yu <[email protected]> > Cc: Felipe Balbi <[email protected]> > Cc: Greg Kroah-Hartman <[email protected]> > Cc: [email protected] > Acked-by: John Youn <[email protected]> > Signed-off-by: John Stultz <[email protected]> > Signed-off-by: Felipe Balbi <[email protected]> > Signed-off-by: Sasha Levin <[email protected]> > Signed-off-by: Greg Kroah-Hartman <[email protected]> > --- > drivers/usb/dwc2/hcd.c | 1 + > 1 file changed, 1 insertion(+) > > --- a/drivers/usb/dwc2/hcd.c > +++ b/drivers/usb/dwc2/hcd.c > @@ -1385,6 +1385,7 @@ static void dwc2_conn_id_status_change(s > dwc2_core_init(hsotg, false, -1); > dwc2_enable_global_interrupts(hsotg); > spin_lock_irqsave(&hsotg->lock, flags); > + dwc2_hsotg_disconnect(hsotg); > dwc2_hsotg_core_init_disconnected(hsotg, false); > spin_unlock_irqrestore(&hsotg->lock, flags); > dwc2_hsotg_core_connect(hsotg); -- Ben Hutchings Software Developer, Codethink Ltd.
