early console in setup code
[    0.000000] Linux version 4.16.0-rc5-mm1-00298-g42658d5 (kbuild@lkp-nex06) (gcc version 7.3.0 (Debian 7.3.0-1)) #1 Fri Mar 30 22:04:39 CST 2018
[    0.000000] Command line: ip=::::vm-lkp-wsx03-quantal-x86_64-30::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-wsx03-quantal-x86_64-30/boot-1-quantal-core-x86_64.cgz-42658d54ce4d9c25c8a286651c60cbc869f2f91e-20180330-17214-djniun-1.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s5-03231935 branch=linux-devel/devel-catchup-201803232002 commit=42658d54ce4d9c25c8a286651c60cbc869f2f91e BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s5-03231935/gcc-7/42658d54ce4d9c25c8a286651c60cbc869f2f91e/vmlinuz-4.16.0-rc5-mm1-00298-g42658d5 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-wsx03-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-s5-03231935/gcc-7/42658d54ce4d9c25c8a286651c60cbc869f2f91e/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,1152
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffdffff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffe0000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1ffe0 max_arch_pfn = 0x400000000
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6a80-0x000f6a8f] mapped at [        (ptrval)]
[    0.000000]   mpc: f6a90-f6b74
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 99000 size 24576
[    0.000000] BRK [0x04a80000, 0x04a80fff] PGTABLE
[    0.000000] BRK [0x04a81000, 0x04a81fff] PGTABLE
[    0.000000] BRK [0x04a82000, 0x04a82fff] PGTABLE
[    0.000000] BRK [0x04a83000, 0x04a83fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1e748000-0x1ffdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6870 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000001FFE1628 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000001FFE147C 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000001FFE0040 00143C (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000001FFE0000 000040
[    0.000000] ACPI: APIC 0x000000001FFE1570 000080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000001FFE15F0 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] kvm-clock: cpu 0, msr 0:1e746001, primary cpu clock
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 2885427478 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000001000-0x000000001ffdffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001ffdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffdffff]
[    0.000000] On node 0 totalpages: 130942
[    0.000000]   DMA32 zone: 2048 pages used for memmap
[    0.000000]   DMA32 zone: 21 pages reserved
[    0.000000]   DMA32 zone: 130942 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 31e3640
[    0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 128873
[    0.000000] Kernel command line: ip=::::vm-lkp-wsx03-quantal-x86_64-30::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-wsx03-quantal-x86_64-30/boot-1-quantal-core-x86_64.cgz-42658d54ce4d9c25c8a286651c60cbc869f2f91e-20180330-17214-djniun-1.yaml ARCH=x86_64 kconfig=x86_64-randconfig-s5-03231935 branch=linux-devel/devel-catchup-201803232002 commit=42658d54ce4d9c25c8a286651c60cbc869f2f91e BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s5-03231935/gcc-7/42658d54ce4d9c25c8a286651c60cbc869f2f91e/vmlinuz-4.16.0-rc5-mm1-00298-g42658d5 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-wsx03-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-s5-03231935/gcc-7/42658d54ce4d9c25c8a286651c60cbc869f2f91e/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=tty
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Memory: 429512K/523768K available (20492K kernel code, 3981K rwdata, 8088K rodata, 1140K init, 23896K bss, 94256K reserved, 0K cma-reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.003333] Running RCU self tests
[    0.003333] NR_IRQS: 4352, nr_irqs: 48, preallocated irqs: 16
[    0.003333] console [ttyS0] enabled
[    0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.003333] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.003333] ... MAX_LOCK_DEPTH:          48
[    0.003333] ... MAX_LOCKDEP_KEYS:        8191
[    0.003333] ... CLASSHASH_SIZE:          4096
[    0.003333] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.003333] ... MAX_LOCKDEP_CHAINS:      65536
[    0.003333] ... CHAINHASH_SIZE:          32768
[    0.003333]  memory used by lock dependency info: 7903 kB
[    0.003333]  per task-struct memory footprint: 2688 bytes
[    0.003333] ------------------------
[    0.003333] | Locking API testsuite:
[    0.003333] ----------------------------------------------------------------------------
[    0.003333]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.003333]   --------------------------------------------------------------------------
[    0.003333]                      A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]                  A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]              A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]              A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]          A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]          A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]          A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]   --------------------------------------------------------------------------
[    0.003333]               recursive read-lock:             |  ok  |             |  ok  |
[    0.003333]            recursive read-lock #2:             |  ok  |             |  ok  |
[    0.003333]             mixed read-write-lock:             |  ok  |             |  ok  |
[    0.003333]             mixed write-read-lock:             |  ok  |             |  ok  |
[    0.003333]   mixed read-lock/lock-write ABBA:             |FAILED|             |  ok  |
[    0.003333]    mixed read-lock/lock-read ABBA:             |  ok  |             |  ok  |
[    0.003333]  mixed write-lock/lock-write ABBA:             |  ok  |             |  ok  |
[    0.003333]   --------------------------------------------------------------------------
[    0.003333]      hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.003333]      soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.003333]      hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.003333]      soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.003333]        sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
[    0.003333]        sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
[    0.003333]          hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.003333]          soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.003333]          hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.003333]          soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.003333]       hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.003333]       soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.003333]       hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.003333]       soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.003333]       hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.003333]       soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.003333]       hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.003333]       soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.003333]       hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.003333]       soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.003333]       hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.003333]       soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.003333]       hard-irq read-recursion/123:  ok  |
[    0.003333]       soft-irq read-recursion/123:  ok  |
[    0.003333]       hard-irq read-recursion/132:  ok  |
[    0.003333]       soft-irq read-recursion/132:  ok  |
[    0.003333]       hard-irq read-recursion/213:  ok  |
[    0.003333]       soft-irq read-recursion/213:  ok  |
[    0.003333]       hard-irq read-recursion/231:  ok  |
[    0.003333]       soft-irq read-recursion/231:  ok  |
[    0.003333]       hard-irq read-recursion/312:  ok  |
[    0.003333]       soft-irq read-recursion/312:  ok  |
[    0.003333]       hard-irq read-recursion/321:  ok  |
[    0.003333]       soft-irq read-recursion/321:  ok  |
[    0.003333]   --------------------------------------------------------------------------
[    0.003333]   | Wound/wait tests |
[    0.003333]   ---------------------
[    0.003333]                   ww api failures:  ok  |  ok  |  ok  |
[    0.003333]                ww contexts mixing:  ok  |  ok  |
[    0.003333]              finishing ww context:  ok  |  ok  |  ok  |  ok  |
[    0.003333]                locking mismatches:  ok  |  ok  |  ok  |
[    0.003333]                  EDEADLK handling:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]            spinlock nest unlocked:  ok  |
[    0.003333]   -----------------------------------------------------
[    0.003333]                                  |block | try  |context|
[    0.003333]   -----------------------------------------------------
[    0.003333]                           context:  ok  |  ok  |  ok  |
[    0.003333]                               try:  ok  |  ok  |  ok  |
[    0.003333]                             block:  ok  |  ok  |  ok  |
[    0.003333]                          spinlock:  ok  |  ok  |  ok  |
[    0.003333] -------------------------------------------------------
[    0.003333] Good, all 261 testcases passed! |
[    0.003333] ---------------------------------
[    0.003333] ACPI: Core revision 20180209
[    0.003333] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.003333] hpet clockevent registered
[    0.006796] APIC: Switch to symmetric I/O mode setup
[    0.013650] x2apic enabled
[    0.016709] Switched APIC routing to physical x2apic.
[    0.020229] enabled ExtINT on CPU#0
[    0.034437] ENABLING IO-APIC IRQs
[    0.040089] init IO_APIC IRQs
[    0.043405]  apic 0 pin 0 not connected
[    0.047021] IOAPIC[0]: Set routing entry (0-1 -> 0xef -> IRQ 1 Mode:0 Active:0 Dest:0)
[    0.050294] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0)
[    0.053333] IOAPIC[0]: Set routing entry (0-3 -> 0xef -> IRQ 3 Mode:0 Active:0 Dest:0)
[    0.053333] IOAPIC[0]: Set routing entry (0-4 -> 0xef -> IRQ 4 Mode:0 Active:0 Dest:0)
[    0.053333] IOAPIC[0]: Set routing entry (0-5 -> 0xef -> IRQ 5 Mode:1 Active:0 Dest:0)
[    0.053333] IOAPIC[0]: Set routing entry (0-6 -> 0xef -> IRQ 6 Mode:0 Active:0 Dest:0)
[    0.053333] IOAPIC[0]: Set routing entry (0-7 -> 0xef -> IRQ 7 Mode:0 Active:0 Dest:0)
[    0.053333] IOAPIC[0]: Set routing entry (0-8 -> 0xef -> IRQ 8 Mode:0 Active:0 Dest:0)
[    0.053333] IOAPIC[0]: Set routing entry (0-9 -> 0xef -> IRQ 9 Mode:1 Active:0 Dest:0)
[    0.053333] IOAPIC[0]: Set routing entry (0-10 -> 0xef -> IRQ 10 Mode:1 Active:0 Dest:0)
[    0.053333] IOAPIC[0]: Set routing entry (0-11 -> 0xef -> IRQ 11 Mode:1 Active:0 Dest:0)
[    0.053333] IOAPIC[0]: Set routing entry (0-12 -> 0xef -> IRQ 12 Mode:0 Active:0 Dest:0)
[    0.053333] IOAPIC[0]: Set routing entry (0-13 -> 0xef -> IRQ 13 Mode:0 Active:0 Dest:0)
[    0.053333] IOAPIC[0]: Set routing entry (0-14 -> 0xef -> IRQ 14 Mode:0 Active:0 Dest:0)
[    0.053333] IOAPIC[0]: Set routing entry (0-15 -> 0xef -> IRQ 15 Mode:0 Active:0 Dest:0)
[    0.053333]  apic 0 pin 16 not connected
[    0.053333]  apic 0 pin 17 not connected
[    0.053333]  apic 0 pin 18 not connected
[    0.053333]  apic 0 pin 19 not connected
[    0.053333]  apic 0 pin 20 not connected
[    0.053333]  apic 0 pin 21 not connected
[    0.053333]  apic 0 pin 22 not connected
[    0.053333]  apic 0 pin 23 not connected
[    0.053333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.053333] tsc: Detected 2260.998 MHz processor
[    0.053422] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x20974986637, max_idle_ns: 440795286310 ns
[    0.056884] Calibrating delay loop (skipped) preset value.. 4523.41 BogoMIPS (lpj=7536660)
[    0.060064] pid_max: default: 4096 minimum: 301
[    0.067088] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.070131] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.082010] mce: CPU supports 10 MCE banks
[    0.083787] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.086709] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.090060] CPU: Intel Core Processor (Haswell) (family: 0x6, model: 0x3c, stepping: 0x4)
[    0.093436] Spectre V2 : Mitigation: Full generic retpoline
[    0.117796] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only.
[    0.122045] NMI watchdog: Perf event create on CPU 0 failed with -2
[    0.123392] NMI watchdog: Perf NMI watchdog permanently disabled
[    0.128159] TSC deadline timer enabled
[    0.130511] devtmpfs: initialized
[    0.135315] x86/mm: Memory block size: 128MB
[    0.161520] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.163439] futex hash table entries: 16 (order: -2, 1536 bytes)
[    0.167702] xor: measuring software checksum speed
[    0.203400]    prefetch64-sse:  1168.800 MB/sec
[    0.240120]    generic_sse:   826.800 MB/sec
[    0.243427] xor: using function: prefetch64-sse (1168.800 MB/sec)
[    0.249557] regulator-dummy: no parameters
[    0.257613] NET: Registered protocol family 16
[    0.274137] audit: initializing netlink subsys (disabled)
[    0.282947] cpuidle: using governor menu
[    0.283589] audit: type=2000 audit(1522419262.866:1): state=initialized audit_enabled=0 res=1
[    0.298507] ACPI: bus type PCI registered
[    0.301807] PCI: Using configuration type 1 for base access
[    1.102532] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    1.105083] cryptd: max_cpu_qlen set to 1000
[    1.163497] raid6: sse2x1   gen()   553 MB/s
[    1.223404] raid6: sse2x1   xor()   394 MB/s
[    1.283466] raid6: sse2x2   gen()   665 MB/s
[    1.343430] raid6: sse2x2   xor()   478 MB/s
[    1.403494] raid6: sse2x4   gen()   587 MB/s
[    1.463438] raid6: sse2x4   xor()   407 MB/s
[    1.466737] raid6: using algorithm sse2x2 gen() 665 MB/s
[    1.470086] raid6: .... xor() 478 MB/s, rmw enabled
[    1.473425] raid6: using ssse3x2 recovery algorithm
[    1.479032] ACPI: Added _OSI(Module Device)
[    1.480133] ACPI: Added _OSI(Processor Device)
[    1.483433] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.486767] ACPI: Added _OSI(Processor Aggregator Device)
[    1.544014] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    1.594983] ACPI: Interpreter enabled
[    1.596917] ACPI: (supports S0 S5)
[    1.600221] ACPI: Using IOAPIC for interrupt routing
[    1.603754] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.609999] ACPI: Enabled 2 GPEs in block 00 to 0F
[    1.773242] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.773492] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments]
[    1.777089] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    1.781854] PCI host bridge to bus 0000:00
[    1.783435] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.786789] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.790121] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.793455] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window]
[    1.796772] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.800908] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    1.813790] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    1.828149] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    1.860099] pci 0000:00:01.1: reg 0x20: [io  0xc040-0xc04f]
[    1.877116] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.880120] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.883453] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.886768] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.896379] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    1.902690] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    1.903562] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    1.913819] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    1.923493] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    1.940138] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    1.970135] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    1.980719] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    1.990072] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    2.000093] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    2.036785] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    2.046870] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[    2.056758] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[    2.095544] pci_bus 0000:00: on NUMA node 0
[    2.112336] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    2.118199] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    2.124533] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    2.131163] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    2.135636] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    2.159775] SCSI subsystem initialized
[    2.161229] libata version 3.00 loaded.
[    2.164630] media: Linux media interface: v0.10
[    2.167119] Linux video capture interface: v2.00
[    2.170477] pps_core: LinuxPPS API ver. 1 registered
[    2.173424] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.177255] EDAC MC: Ver: 3.0.0
[    2.188603] Advanced Linux Sound Architecture Driver Initialized.
[    2.190769] PCI: Using ACPI for IRQ routing
[    2.193420] PCI: pci_cache_line_size set to 64 bytes
[    2.197802] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    2.200122] e820: reserve RAM buffer [mem 0x1ffe0000-0x1fffffff]
[    2.210130] nfc: nfc_init: NFC Core ver 0.1
[    2.213758] NET: Registered protocol family 39
[    2.225933] clocksource: Switched to clocksource kvm-clock
[    2.242030] VFS: Disk quotas dquot_6.6.0
[    2.248955] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.274759] FS-Cache: Loaded
[    2.283179] pnp: PnP ACPI init
[    2.292543] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    2.303991] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    2.314061] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    2.323563] pnp 00:03: [dma 2]
[    2.328319] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    2.340990] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    2.357330] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    2.367792] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    2.392939] pnp: PnP ACPI: found 7 devices
[    2.411994] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    2.425448] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    2.434158] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    2.442873] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    2.458564] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfebfffff window]
[    2.476001] NET: Registered protocol family 2
[    2.485430] tcp_listen_portaddr_hash hash table entries: 256 (order: 2, 22528 bytes)
[    2.505709] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    2.521106] TCP bind hash table entries: 4096 (order: 6, 327680 bytes)
[    2.538411] TCP: Hash tables configured (established 4096 bind 4096)
[    2.554387] UDP hash table entries: 256 (order: 3, 49152 bytes)
[    2.567119] UDP-Lite hash table entries: 256 (order: 3, 49152 bytes)
[    2.581512] NET: Registered protocol family 1
[    2.591951] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    2.604809] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    2.615797] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    2.630607] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    2.646360] PCI: CLS 0 bytes, default 64
[    2.655762] Unpacking initramfs...
[   21.382979] Freeing initrd memory: 25184K
[   21.416551] Scanning for low memory corruption every 60 seconds
[   21.457033] PCLMULQDQ-NI instructions are not detected.
[   21.474140] AVX or AES-NI instructions are not detected.
[   21.486549] CPU feature 'AVX registers' is not supported.
[   21.498864] CPU feature 'AVX registers' is not supported.
[   21.511730] AVX2 or AES-NI instructions are not detected.
[   21.534928] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[   21.571880] spin_lock-torture: Creating torture_shuffle task
[   21.580402] spin_lock-torture: Creating torture_stutter task
[   21.588662] spin_lock-torture: torture_shuffle task started
[   21.597310] spin_lock-torture: torture_stutter task started
[   21.607422] spin_lock-torture: Creating lock_torture_writer task
[   21.617861] spin_lock-torture: Creating lock_torture_writer task
[   21.625957] spin_lock-torture: lock_torture_writer task started
[   21.635581] spin_lock-torture: lock_torture_writer task started
[   21.645634] spin_lock-torture: Creating lock_torture_stats task
[   21.657392] spin_lock-torture: lock_torture_stats task started
[   28.297795] torture_init_begin: Refusing rcu init: spin_lock running.
[   28.310509] torture_init_begin: One torture test at a time!
[   28.340353] Initialise system trusted keyrings
[   28.355060] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[   28.375449] zbud: loaded
[   28.388638] ntfs: driver 2.1.32 [Flags: R/W].
[   28.400883] fuse init (API version 7.26)
[   28.413874] JFS: nTxBlock = 3552, nTxLock = 28418
[   28.442272] SGI XFS with ACLs, security attributes, scrub, no debug enabled
[   28.464856] NILFS version 2 loaded
[   28.562747] NET: Registered protocol family 38
[   28.575331] Key type asymmetric registered
[   28.585534] Asymmetric key parser 'x509' registered
[   28.593149] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[   28.603873] io scheduler noop registered (default)
[   28.615310] io scheduler kyber registered
[   30.955643] String selftests succeeded
[   30.975995] test_string_helpers: Running tests...
[   30.992299] 
[   30.992299] Start testing find_bit() with random-filled bitmap
[   31.029921] find_next_bit:                12017308 ns, 164428 iterations
[   31.056588] find_next_zero_bit:           11992123 ns, 163253 iterations
[   31.082970] find_last_bit:                11307022 ns, 164428 iterations
[   36.380530] find_first_bit:             5282800307 ns, 164429 iterations
[   36.403155] find_next_and_bit:		218884 cycles, 1 iterations
[   36.416993] 
[   36.416993] Start testing find_bit() with sparse bitmap
[   36.434036] find_next_bit:                  136970 ns,    655 iterations
[   36.475847] find_next_zero_bit:           26386275 ns, 327026 iterations
[   36.487673] find_last_bit:                  203339 ns,    655 iterations
[   36.527862] find_first_bit:               29128028 ns,    655 iterations
[   36.542993] find_next_and_bit:		287190 cycles, 1 iterations
[   36.564185] test_firmware: interface ready
[   36.586319] test_printf: all 240 tests passed
[   36.597987] test_bitmap: test 13: input is '0-2047:128/256' OK, Time: 3128
[   36.668500] test_bitmap: all 1524 tests passed
[   36.678676] test_uuid: all 18 tests passed
[   36.696495] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[   36.704143] crc32: self tests passed, processed 225944 bytes in 1685636 nsec
[   36.715643] crc32c: CRC_LE_BITS = 32
[   36.720966] crc32c: self tests passed, processed 225944 bytes in 753917 nsec
[   36.919450] crc32_combine: 8373 self tests passed
[   37.120272] crc32c_combine: 8373 self tests passed
[   37.155789] rbtree testing
[   37.238682]  -> test 1 (latency of nnodes insert+delete): 187222 cycles
[   37.339917]  -> test 2 (latency of nnodes cached insert+delete): 184273 cycles
[   37.363804]  -> test 3 (latency of inorder traversal): 25866 cycles
[   37.373229]  -> test 4 (latency to fetch first node)
[   37.380749]         non-cached: 277 cycles
[   37.387197]         cached: 0 cycles
[   37.940362] augmented rbtree testing
[   38.067807]  -> test 1 (latency of nnodes insert+delete): 287947 cycles
[   38.203042]  -> test 2 (latency of nnodes cached insert+delete): 263996 cycles
[   38.870831] gpio_it87: no device
[   38.898674] rivafb_setup START
[   38.904076] nvidiafb_setup START
[   38.909784] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[   38.927220] hgafb: HGA card not detected.
[   38.934408] hgafb: probe of hgafb.0 failed with error -22
[   38.951427] uvesafb: failed to execute /sbin/v86d
[   38.957193] uvesafb: make sure that the v86d helper is installed and executable
[   38.965681] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[   38.973165] uvesafb: vbe_init() failed with -22
[   38.978585] uvesafb: probe of uvesafb.0 failed with error -22
[   38.989337] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   38.998188] ACPI: Power Button [PWRF]
[   39.428709] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[   39.523130] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[   39.600323] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[   39.633981] lp: driver loaded but no devices found
[   39.640535] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[   39.650644] ac.o: No PCI boards found.
[   39.655991] ac.o: For an ISA board you must supply memory and irq parameters.
[   39.667143] Non-volatile memory driver v1.3
[   39.678630] ppdev: user-space parallel port driver
[   39.686635] Linux agpgart interface v0.103
[   39.694026] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[   39.708153] drm_mm: Testing DRM range manger (struct drm_mm), with random_seed=0xac24cbaf max_iterations=8192 max_prime=128
[   39.724624] drm_mm: igt_sanitycheck - ok!
[   39.731912] igt_debug 0x0000000000000000-0x0000000000000200: 512: free
[   39.742762] igt_debug 0x0000000000000200-0x0000000000000600: 1024: used
[   39.753101] igt_debug 0x0000000000000600-0x0000000000000a00: 1024: free
[   39.763674] igt_debug 0x0000000000000a00-0x0000000000000e00: 1024: used
[   39.773518] igt_debug 0x0000000000000e00-0x0000000000001000: 512: free
[   39.781514] igt_debug total: 4096, used 2048 free 2048
[   83.817190] Writes:  Total: 369266  Max/Min: 0/0   Fail: 0 
[  145.074171] Writes:  Total: 468491  Max/Min: 0/0   Fail: 0 
[  206.822636] Writes:  Total: 565998  Max/Min: 0/0   Fail: 0 
[  267.890694] Writes:  Total: 667038  Max/Min: 0/0   Fail: 0 
[  329.804297] Writes:  Total: 770356  Max/Min: 0/0   Fail: 0 
[  390.506854] Writes:  Total: 879500  Max/Min: 0/0   Fail: 0 
[  451.913726] Writes:  Total: 936708  Max/Min: 0/0   Fail: 0 
[  453.681542] [drm] Initialized vgem 1.0.0 20120112 for virtual device on minor 0
[  453.703903] [drm] Found bochs VGA, ID 0xb0c0.
[  453.712033] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebf0000.
[  453.727942] [TTM] Zone  kernel: Available graphics memory: 227348 kiB
[  453.739586] [TTM] Initializing pool allocator
[  453.753254] [TTM] Initializing DMA pool allocator
[  453.791562] bochs-drm 0000:00:02.0: fb0: bochsdrmfb frame buffer device
[  453.812847] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 1
[  453.844172] parport_pc 00:04: reported by Plug and Play ACPI
[  453.855892] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[  453.873970] lp0: using parport0 (interrupt-driven).
[  453.916395] lkdtm: No crash points registered, enable through debugfs
[  453.931915] Phantom Linux Driver, version n0.9.8, init OK
[  453.945300] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[  453.962143] c2port c2port0: C2 port uc added
[  453.969074] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[  453.994578] Guest personality initialized and is inactive
[  454.010658] VMCI host device registered (name=vmci, major=10, minor=59)
[  454.027086] Initialized host personality
[  454.044285] mic_init not running on X100 ret -19
[  454.100163] Uniform Multi-Platform E-IDE driver
[  454.109883] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[  454.123780] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[  454.142669]     ide0: BM-DMA at 0xc040-0xc047
[  454.151090]     ide1: BM-DMA at 0xc048-0xc04f
[  454.160134] Probing IDE interface ide0...
[  454.745978] Probing IDE interface ide1...
[  455.501373] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[  456.191070] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[  456.204232] hdc: MWDMA2 mode selected
[  456.215989] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[  456.240754] ide1 at 0x170-0x177,0x376 on irq 15
[  456.279835] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[  456.305893] Loading iSCSI transport class v2.0-870.
[  456.320736] snic:Cisco SCSI NIC Driver, ver 0.0.1.18
[  456.335859] Adaptec aacraid driver 1.2.1[50877]-custom
[  456.348150] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[  456.367658] iscsi: registered transport (qla4xxx)
[  456.380388] QLogic iSCSI HBA Driver
[  456.392353] megasas: 07.704.04.00-rc1
[  456.402649] mpt3sas version 17.100.00.00 loaded
[  456.419347] 3ware Storage Controller device driver for Linux v1.26.02.003.
[  456.438358] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[  456.456055] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[  456.477124] ppa: Version 2.07 (for Linux 2.4.x)
[  456.510628] RocketRAID 3xxx/4xxx Controller driver v1.10.0
[  456.524112] stex: Promise SuperTrak EX Driver version: 6.02.0000.01
[  456.542485] iscsi: registered transport (be2iscsi)
[  456.554599] In beiscsi_module_init, tt=00000000c507d435
[  456.568827] esas2r: driver will not be loaded because no ATTO esas2r devices were found
[  456.624403] scsi host0: scsi_debug: version 0188 [20180128]
[  456.624403]   dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0
[  456.666987] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0188 PQ: 0 ANSI: 7
[  456.699264] sd 0:0:0:0: Power-on or device reset occurred
[  456.727813] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB)
[  456.761265] Error: Driver 'pata_platform' is already registered, aborting...
[  456.778406] sd 0:0:0:0: [sda] Write Protect is off
[  456.790653] sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08
[  456.816386] Rounding down aligned max_sectors from 4294967295 to 4294967288
[  456.845169] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[  456.861728] e1000: Copyright (c) 1999-2006 Intel Corporation.
[  456.874650] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[  460.717301] PCI Interrupt Link [LNKC] enabled at IRQ 11
[  460.821921] sd 0:0:0:0: [sda] Attached SCSI disk
[  461.739257] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[  461.755720] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[  461.771147] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[  461.784956] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[  461.799335] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[  461.816315] igb: Copyright (c) 2007-2014 Intel Corporation.
[  461.831641] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
[  461.849811] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[  461.874101] AX.25: bpqether driver version 004
[  461.884635] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[  461.884635] baycom_ser_fdx: version 0.10
[  461.932306] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
[  461.944661] hdlcdrv: version 0.8
[  461.951663] baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[  461.951663] baycom_ser_hdx: version 0.10
[  461.990446] baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[  461.990446] baycom_par: version 0.9
[  462.167026] panel: panel driver registered on parport0 (io=0x378).
[  462.184559] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[  462.214381] serio: i8042 KBD port at 0x60,0x64 irq 1
[  462.226397] serio: i8042 AUX port at 0x60,0x64 irq 12
[  462.262072] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[  462.294316] rtc rtc0: alarm rollover: day
[  462.307477] rtc rtc0: test: dev (0:0)
[  462.315446] rtc-test rtc-test.0: rtc core: registered test as rtc0
[  462.352299] rtc rtc1: alarm rollover: day
[  462.368110] rtc rtc1: test: dev (0:1)
[  462.375666] rtc-test rtc-test.1: rtc core: registered test as rtc1
[  462.395624] i2c /dev entries driver
[  462.407251] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[  462.441699] i2c-parport-light: adapter type unspecified
[  462.458425] Marvell M88ALP01 'CAFE' Camera Controller version 2
[  462.482543] smssdio: Siano SMS1xxx SDIO driver
[  462.492580] smssdio: Copyright Pierre Ossman
[  462.505806] pps pps0: new PPS source ktimer
[  462.513741] pps pps0: ktimer PPS source registered
[  462.522662] pps_parport: parallel port PPS client
[  462.532025] parport0: cannot grant exclusive access for device pps_parport
[  462.545055] pps_parport: couldn't register with parport0
[  462.555490] Driver for 1-wire Dallas network protocol.
[  462.571597] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[  462.814641] f71882fg: Not a Fintek device
[  462.824616] f71882fg: Not a Fintek device
[  463.091381] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[  463.281246] pc87360: PC8736x not detected, module not inserted
[  463.295282] sch56xx_common: Unsupported device id: 0xff
[  463.305260] sch56xx_common: Unsupported device id: 0xff
[  463.422468] intel_powerclamp: CPU does not support MWAIT
[  463.439282] advantechwdt: WDT driver for Advantech single board computer initialising
[  463.467100] advantechwdt: initialized. timeout=60 sec (nowayout=0)
[  463.477591] ib700wdt: WDT driver for IB700 single board computer initialising
[  463.490204] ib700wdt: START method I/O 443 is not available
[  463.498725] ib700wdt: probe of ib700wdt failed with error -5
[  463.507925] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising
[  463.524459] wafer5823wdt: I/O address 0x0443 already in use
[  463.536450] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[  463.549572] iTCO_vendor_support: vendor-support=0
[  463.559223] it87_wdt: no device
[  463.567298] sc1200wdt: build 20020303
[  463.575727] sc1200wdt: io parameter must be specified
[  463.583473] pc87413_wdt: Version 1.1 at io 0x2E
[  463.590273] pc87413_wdt: cannot register miscdev on minor=130 (err=-16)
[  463.600224] nv_tco: NV TCO WatchDog Timer Driver v0.01
[  463.610555] sbc60xxwdt: I/O address 0x0443 already in use
[  463.618470] cpu5wdt: misc_register failed
[  463.628118] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising...
[  463.643450] smsc37b787_wdt: Unable to register miscdev on minor 130
[  463.650934] w83877f_wdt: I/O address 0x0443 already in use
[  463.657974] w83977f_wdt: driver v1.00
[  463.665068] w83977f_wdt: cannot register miscdev on minor=130 (err=-16)
[  463.678352] machzwd: MachZ ZF-Logic Watchdog driver initializing
[  463.687132] machzwd: no ZF-Logic found
[  463.693426] sbc_epx_c3: cannot register miscdev on minor=130 (err=-16)
[  463.706024] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16).
[  463.721650] watchdog: Software Watchdog: a legacy watchdog module is probably present.
[  463.735746] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[  463.765363] No PC Engines board detected
[  463.775959] leds_ss4200: no LED devices found
[  463.789760] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[  463.903800] AMD(R) PCI-E Non-Transparent Bridge Driver 1.0
[  463.917054] IDT PCI-E Non-Transparent Bridge Driver 2.0
[  463.932318] Intel(R) PCI-E Non-Transparent Bridge Driver 2.0
[  464.050891] oprofile: using NMI timer interrupt.
[  464.065026] NET: Registered protocol family 26
[  464.078183] NET: Registered protocol family 10
[  464.099756] Segment Routing with IPv6
[  464.108834] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[  464.131200] NET: Registered protocol family 17
[  464.142638] NET: Registered protocol family 15
[  464.182620] NET: Registered protocol family 6
[  464.194484] NET: Registered protocol family 3
[  464.206577] 8021q: 802.1Q VLAN Support v1.8
[  464.218305] 9pnet: Installing 9P2000 support
[  464.230330] NET: Registered protocol family 37
[  464.243686] Key type dns_resolver registered
[  464.254924] start plist test
[  464.283959] end plist test
[  464.309630] ... APIC ID:      00000000 (0)
[  464.312412] ... APIC VERSION: 01050014
[  464.312412] 0000000000000000000000000000000000000000000000000000000000000000
[  464.312412] 0000000000000000000000000000000000000000000000000000000000000000
[  464.312412] 0000000000000000000000000000000000000000000000000000000000001000
[  464.374375] number of MP IRQ sources: 15.
[  464.382705] number of IO-APIC #0 registers: 24.
[  464.392066] testing the IO APIC.......................
[  464.403223] IO APIC #0......
[  464.409378] .... register #00: 00000000
[  464.417540] .......    : physical APIC id: 00
[  464.427234] .......    : Delivery Type: 0
[  464.435753] .......    : LTS          : 0
[  464.444117] .... register #01: 00170011
[  464.452185] .......     : max redirection entries: 17
[  464.461820] .......     : PRQ implemented: 0
[  464.468818] .......     : IO APIC version: 11
[  464.476020] .... register #02: 00000000
[  464.482429] .......     : arbitration: 00
[  464.488948] .... IRQ redirection table:
[  464.495332] IOAPIC 0:
[  464.499482]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[  464.512245]  pin01, enabled , edge , high, V(25), IRR(0), S(0), physical, D(00), M(0)
[  464.524333]  pin02, enabled , edge , high, V(30), IRR(0), S(0), physical, D(00), M(0)
[  464.536354]  pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[  464.548676]  pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[  464.560887]  pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[  464.573037]  pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[  464.585324]  pin07, enabled , edge , high, V(21), IRR(0), S(0), physical, D(00), M(0)
[  464.597544]  pin08, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[  464.609626]  pin09, enabled , level, high, V(20), IRR(0), S(0), physical, D(00), M(0)
[  464.621688]  pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[  464.633866]  pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[  464.646147]  pin0c, enabled , edge , high, V(24), IRR(0), S(0), physical, D(00), M(0)
[  464.658371]  pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[  464.670609]  pin0e, enabled , edge , high, V(22), IRR(0), S(0), physical, D(00), M(0)
[  464.683125]  pin0f, enabled , edge , high, V(23), IRR(0), S(0), physical, D(00), M(0)
[  464.700101]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[  464.717185]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[  464.734262]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[  464.751307]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[  464.768318]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[  464.785236]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[  464.802275]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[  464.814049]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[  464.827783] IRQ to pin mappings:
[  464.834682] IRQ0 -> 0:2
[  464.840260] IRQ1 -> 0:1
[  464.845934] IRQ3 -> 0:3
[  464.851475] IRQ4 -> 0:4
[  464.857148] IRQ5 -> 0:5
[  464.862754] IRQ6 -> 0:6
[  464.868256] IRQ7 -> 0:7
[  464.873899] IRQ8 -> 0:8
[  464.879475] IRQ9 -> 0:9
[  464.885083] IRQ10 -> 0:10
[  464.890947] IRQ11 -> 0:11
[  464.897008] IRQ12 -> 0:12
[  464.903028] IRQ13 -> 0:13
[  464.908866] IRQ14 -> 0:14
[  464.914763] IRQ15 -> 0:15
[  464.919042] .................................... done.
[  464.951149] sched_clock: Marking stable (464951019765, 0)->(469569659800, -4618640035)
[  464.976241] Loading compiled-in X.509 certificates
[  464.993871] Btrfs loaded, crc32c=crc32c-intel, assert=on, integrity-checker=on
[  465.015096] Key type big_key registered
[  465.026439] Key type encrypted registered
[  465.038621] RIO: rio_register_scan for mport_id=-1
[  465.061240] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[  465.074034] EDD information not available.
[  465.123842] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[  465.157806] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  465.167110] 8021q: adding VLAN 0 to HW filter on device eth0
[  465.176339] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  465.195206] Sending DHCP requests ., OK
[  465.217757] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15
[  465.228226] IP-Config: Complete:
[  465.234707]      device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2
[  465.251820]      host=vm-lkp-wsx03-quantal-x86_64-30, domain=, nis-domain=(none)
[  465.264877]      bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath=     nameserver0=10.0.2.3
[  465.285651] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[  465.318438] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  465.334935] ALSA device list:
[  465.342226]   No soundcards found.
[  465.353865] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[  465.375052] platform regulatory.0: Falling back to user helper
[  465.423890] Freeing unused kernel memory: 1140K
[  465.434948] Write protecting the kernel read-only data: 30720k
[  465.463555] Freeing unused kernel memory: 2004K
[  465.479594] Freeing unused kernel memory: 104K
[  465.489742] rodata_test: all tests were successful
[  465.702558] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[  465.721123] PGD 800000001740e067 P4D 800000001740e067 PUD 1740f067 PMD 0 
[  465.737033] Oops: 0002 [#1] PTI
[  465.744456] CPU: 0 PID: 163 Comm: rc.local Not tainted 4.16.0-rc5-mm1-00298-g42658d5 #1
[  465.760374] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[  465.773920] RIP: 0010:list_lru_add+0x1e/0x70
[  465.780850] RSP: 0018:ffffc90001f0fe18 EFLAGS: 00010246
[  465.791551] RAX: ffff88001a1f16f0 RBX: ffff88000001a508 RCX: 0000000000000001
[  465.806362] RDX: 0000000000000000 RSI: ffff88000001a520 RDI: 0000000000000246
[  465.821265] RBP: ffffc90001f0fe28 R08: 0000000000000000 R09: 0000000000000001
[  465.836206] R10: ffffc90001f0fd88 R11: 0000000000000001 R12: ffff88001a1f16f0
[  465.850706] R13: ffffffff82c213d8 R14: ffffffff811aa4d5 R15: ffff88001a1f15f0
[  465.865285] FS:  00007fccddf45700(0000) GS:ffffffff82e3f000(0000) knlGS:0000000000000000
[  465.881839] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  465.893412] CR2: 0000000000000000 CR3: 0000000017868004 CR4: 00000000000206f0
[  465.907019] Call Trace:
[  465.911369]  d_lru_add+0x37/0x40
[  465.917037]  dput+0x181/0x1d0
[  465.922225]  __fput+0x1a7/0x1c0
[  465.928052]  ____fput+0x9/0x10
[  465.933601]  task_work_run+0x84/0xc0
[  465.940404]  exit_to_usermode_loop+0x4e/0x80
[  465.948013]  do_syscall_64+0x179/0x190
[  465.954817]  entry_SYSCALL_64_after_hwframe+0x42/0xb7
[  465.963476] RIP: 0033:0x7fccdd625040
[  465.969435] RSP: 002b:00007fff689ff258 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
[  465.981362] RAX: 0000000000000000 RBX: 00000000006f1c08 RCX: 00007fccdd625040
[  465.993162] RDX: 00000000fbada408 RSI: 0000000000000001 RDI: 0000000000000003
[  466.005567] RBP: 0000000000000000 R08: 0000000000000078 R09: 0000000001000000
[  466.018316] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000000
[  466.030899] R13: 000000000046e150 R14: 00000000000004f0 R15: 0000000000000001
[  466.043602] Code: c3 66 90 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 54 53 48 8b 1f 49 89 f4 48 89 df e8 db f6 f5 00 49 8b 04 24 49 39 c4 75 3d <48> c7 04 25 00 00 00 00 00 00 00 00 48 8b 43 50 48 8d 53 48 4c 
[  466.077316] RIP: list_lru_add+0x1e/0x70 RSP: ffffc90001f0fe18
[  466.087943] CR2: 0000000000000000
[  466.094137] ---[ end trace aeec590ab6dccbb2 ]---
[  466.102126] Kernel panic - not syncing: Fatal exception
[  466.110551] Kernel Offset: disabled

Elapsed time: 470

#!/bin/bash

# To reproduce,
# 1) save job-script and this script (both are attached in 0day report email)
# 2) run this script with your compiled kernel and optional env $INSTALL_MOD_PATH

kernel=$1

initrds=(
	/osimage/quantal/quantal-core-x86_64.cgz
	/lkp/lkp/lkp-x86_64.cgz
)

HTTP_PREFIX=https://github.com/0day-ci/lkp-qemu/raw/master
wget --timestamping "${initrds[@]/#/$HTTP_PREFIX}"

{
	cat "${initrds[@]//*\//}"
	[[ $INSTALL_MOD_PATH ]] && (
		cd "$INSTALL_MOD_PATH"
		find lib | cpio -o -H newc --quiet | gzip
	)
	echo  job-script | cpio -o -H newc --quiet | gzip
} > initrd.img

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-cpu Haswell,+smep,+smap
	-kernel $kernel
	-initrd initrd.img
	-m 512
	-smp 2
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-serial stdio
	-display none
	-monitor null
)

append=(
	ip=::::vm-lkp-wsx03-quantal-x86_64-30::dhcp
	root=/dev/ram0
	user=lkp
	job=/job-script
	ARCH=x86_64
	kconfig=x86_64-randconfig-s5-03231935
	branch=linux-devel/devel-catchup-201803232002
	commit=42658d54ce4d9c25c8a286651c60cbc869f2f91e
	BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s5-03231935/gcc-7/42658d54ce4d9c25c8a286651c60cbc869f2f91e/vmlinuz-4.16.0-rc5-mm1-00298-g42658d5
	max_uptime=600
	RESULT_ROOT=/result/boot/1/vm-lkp-wsx03-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-s5-03231935/gcc-7/42658d54ce4d9c25c8a286651c60cbc869f2f91e/0
	result_service=tmpfs
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	drbd.minor_count=8
	systemd.log_level=err
	ignore_loglevel
	console=tty0
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	vga=normal
	rw
	drbd.minor_count=8
	rcuperf.shutdown=0
)

"${kvm[@]}" -append "${append[*]}"
