From: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>

Add the LVDS device to r8a77970.dtsi in a disabled state. Also connect
the it to the LVDS output of the DU. While at it align the endpoint name
of the du to du_out_lvds0 which is used in other Renesas DTS files to
describe this link.

Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
---
 arch/arm64/boot/dts/renesas/r8a77970.dtsi | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi 
b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index e649e86..b48d62c 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -658,7 +658,34 @@
 
                                port@1 {
                                        reg = <1>;
-                                       du_out_lvds: endpoint {
+                                       du_out_lvds0: endpoint {
+                                               remote-endpoint = <&lvds0_in>;
+                                       };
+                               };
+                       };
+               };
+
+               lvds0: lvds@feb90000 {
+                       compatible = "renesas,r8a77970-lvds";
+                       reg = <0 0xfeb90000 0 0x14>;
+                       clocks = <&cpg CPG_MOD 727>;
+                       power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+                       resets = <&cpg 727>;
+                       status = "disabled";
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               port@0 {
+                                       reg = <0>;
+                                       lvds0_in: endpoint {
+                                               remote-endpoint = 
<&du_out_lvds0>;
+                                       };
+                               };
+                               port@1 {
+                                       reg = <1>;
+                                       lvds0_out: endpoint {
                                        };
                                };
                        };
-- 
2.7.4

Reply via email to