Hi! > > > > Do you have a tool to use and a script? > > > > > > Yes I used the shell script I posted earlier, but forgot it also > > > needs the ldattach done. > > > > > > Anyways, last night and today I wrote a quick test utility called > > > droid4-ngsm that initializes things and I can use to do some > > > experiments to get the ts27010 channel proxying to W3GLTE also > > > going: > > > > > > http://github.com/tmlind/droid4-ngsm/ > > > > Ok, now i'm confused. It wants to bind to ttyS0, but modem is on > > ttyUSB4 AFAICT? Or is the modem connected to serial port, too? (Do I > > need to enable some more drivers for that?) > > > > I do have ttyS0, but I don't think there's anything attached there. Or > > is ttyS0 for the LTE modem? > > The ttyS0 is connected to mdm6600, and ttyUSB4 seems to be > some buggy subset of ttyS0 n_gsm dlci1. You need need at least > the following commits in current mainline kernel: > > 984c7706ff18 ("ARM: dts: omap4-droid4: Configure uart1 pins") > e5b9fd7bdeb5 ("ARM: dts: omap4-droid4: Configure MDM6600 USB PHY") > > And then you need PHY_MAPPHONE_MDM6600 and CONFIG_N_GSM enabled.
Ok, I should have all that enabled. But droid4-ngsm still fails: user@devuan:/my/droid4-ngsm$ sudo ./droid4-ngsm Starting ngsm.. Testing ngsm.. Could not open /dev/gsmtty1: Level 2 halted Trying to start ngsm again: Level 2 halted Starting ngsm.. commit 984c7706ff180e33096c57183435d925cb644576 says: ARM: dts: omap4-droid4: Configure uart1 pins These are needed to use the n_gsm driver for TS 27.010 UART multiplexing. Note that support for the OOB wake gpio is still missing so the UART is not yet usable for n_gsm. ...am I still missing the OOB wake gpio support? Thanks, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Description: Digital signature