From: Qiufang Dai <qiufang....@amlogic.com>

Adds a Clock and Reset controller driver for the Always-On part
of the Amlogic Meson-AXG SoC.

Signed-off-by: Qiufang Dai <qiufang....@amlogic.com>
Signed-off-by: Yixun Lan <yixun....@amlogic.com>
---
 drivers/clk/meson/Kconfig     |   1 +
 drivers/clk/meson/Makefile    |   2 +-
 drivers/clk/meson/axg-aoclk.c | 164 ++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/axg-aoclk.h |  31 ++++++++
 4 files changed, 197 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/meson/axg-aoclk.c
 create mode 100644 drivers/clk/meson/axg-aoclk.h

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index fddc7ec7b820..815659eebea3 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -38,6 +38,7 @@ config COMMON_CLK_AXG
        bool
        depends on COMMON_CLK_AMLOGIC
        select RESET_CONTROLLER
+       select COMMON_CLK_MESON_AO
        select COMMON_CLK_REGMAP_MESON
        select MFD_SYSCON
        help
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 0a8df284f4e7..d0d13aeb369a 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -6,5 +6,5 @@ obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o 
clk-audio-divider.o
 obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
 obj-$(CONFIG_COMMON_CLK_GXBB)   += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
-obj-$(CONFIG_COMMON_CLK_AXG)    += axg.o
+obj-$(CONFIG_COMMON_CLK_AXG)    += axg.o axg-aoclk.o
 obj-$(CONFIG_COMMON_CLK_REGMAP_MESON)  += clk-regmap.o
diff --git a/drivers/clk/meson/axg-aoclk.c b/drivers/clk/meson/axg-aoclk.c
new file mode 100644
index 000000000000..cb56d809d3df
--- /dev/null
+++ b/drivers/clk/meson/axg-aoclk.c
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson-AXG Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturque...@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang....@amlogic.com>
+ */
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/mfd/syscon.h>
+#include <linux/init.h>
+#include "clkc.h"
+#include "axg-aoclk.h"
+
+#define AXG_AO_GATE(_name, _bit)                                       \
+static struct clk_regmap _name##_ao = {                                        
\
+       .data = &(struct clk_regmap_gate_data) {                        \
+               .offset = (AO_RTI_GEN_CNTL_REG0),                       \
+               .bit_idx = (_bit),                                      \
+       },                                                              \
+       .hw.init = &(struct clk_init_data) {                            \
+               .name = #_name "_ao",                                   \
+               .ops = &clk_regmap_gate_ops,                            \
+               .parent_names = (const char *[]){ "clk81" },            \
+               .num_parents = 1,                                       \
+               .flags = CLK_IGNORE_UNUSED,                             \
+       },                                                              \
+}
+
+AXG_AO_GATE(remote, 0);
+AXG_AO_GATE(i2c_master, 1);
+AXG_AO_GATE(i2c_slave, 2);
+AXG_AO_GATE(uart1, 3);
+AXG_AO_GATE(uart2, 5);
+AXG_AO_GATE(ir_blaster, 6);
+AXG_AO_GATE(saradc, 7);
+
+static struct clk_regmap ao_clk81 = {
+       .data = &(struct clk_regmap_mux_data) {
+               .offset = AO_RTI_PWR_CNTL_REG0,
+               .mask = 0x1,
+               .shift = 8,
+       },
+       .hw.init = &(struct clk_init_data){
+               .name = "ao_clk81",
+               .ops = &clk_regmap_mux_ro_ops,
+               .parent_names = (const char *[]){ "clk81", "ao_alt_xtal"},
+               .num_parents = 2,
+       },
+};
+
+static struct clk_regmap axg_saradc_mux = {
+       .data = &(struct clk_regmap_mux_data) {
+               .offset = AO_SAR_CLK,
+               .mask = 0x3,
+               .shift = 9,
+       },
+       .hw.init = &(struct clk_init_data){
+               .name = "axg_saradc_mux",
+               .ops = &clk_regmap_mux_ops,
+               .parent_names = (const char *[]){ "xtal", "ao_clk81" },
+               .num_parents = 2,
+       },
+};
+
+static struct clk_regmap axg_saradc_div = {
+       .data = &(struct clk_regmap_div_data) {
+               .offset = AO_SAR_CLK,
+               .shift = 0,
+               .width = 8,
+       },
+       .hw.init = &(struct clk_init_data){
+               .name = "axg_saradc_div",
+               .ops = &clk_regmap_divider_ops,
+               .parent_names = (const char *[]){ "axg_saradc_mux" },
+               .num_parents = 1,
+               .flags = CLK_SET_RATE_PARENT,
+       },
+};
+
+static struct clk_regmap axg_saradc_gate = {
+       .data = &(struct clk_regmap_gate_data) {
+               .offset = AO_SAR_CLK,
+               .bit_idx = 8,
+       },
+       .hw.init = &(struct clk_init_data){
+               .name = "axg_saradc_gate",
+               .ops = &clk_regmap_gate_ops,
+               .parent_names = (const char *[]){ "axg_saradc_div" },
+               .num_parents = 1,
+               .flags = CLK_SET_RATE_PARENT,
+       },
+};
+
+static const unsigned int axg_aoclk_reset[] = {
+       [RESET_AO_REMOTE] = 16,
+       [RESET_AO_I2C_MASTER] = 18,
+       [RESET_AO_I2C_SLAVE] = 19,
+       [RESET_AO_UART1] = 17,
+       [RESET_AO_UART2] = 22,
+       [RESET_AO_IR_BLASTER] = 23,
+};
+
+static struct clk_regmap *axg_aoclk_regmap[] = {
+       [CLKID_AO_REMOTE]       = &remote_ao,
+       [CLKID_AO_I2C_MASTER]   = &i2c_master_ao,
+       [CLKID_AO_I2C_SLAVE]    = &i2c_slave_ao,
+       [CLKID_AO_UART1]        = &uart1_ao,
+       [CLKID_AO_UART2]        = &uart2_ao,
+       [CLKID_AO_IR_BLASTER]   = &ir_blaster_ao,
+       [CLKID_AO_SAR_ADC]      = &saradc_ao,
+       [CLKID_AO_CLK81]        = &ao_clk81,
+       [CLKID_AO_SAR_ADC_SEL]  = &axg_saradc_mux,
+       [CLKID_AO_SAR_ADC_DIV]  = &axg_saradc_div,
+       [CLKID_AO_SAR_ADC_CLK]  = &axg_saradc_gate,
+};
+
+static const struct clk_hw_onecell_data axg_aoclk_onecell_data = {
+       .hws = {
+               [CLKID_AO_REMOTE]       = &remote_ao.hw,
+               [CLKID_AO_I2C_MASTER]   = &i2c_master_ao.hw,
+               [CLKID_AO_I2C_SLAVE]    = &i2c_slave_ao.hw,
+               [CLKID_AO_UART1]        = &uart1_ao.hw,
+               [CLKID_AO_UART2]        = &uart2_ao.hw,
+               [CLKID_AO_IR_BLASTER]   = &ir_blaster_ao.hw,
+               [CLKID_AO_SAR_ADC]      = &saradc_ao.hw,
+               [CLKID_AO_CLK81]        = &ao_clk81.hw,
+               [CLKID_AO_SAR_ADC_SEL]  = &axg_saradc_mux.hw,
+               [CLKID_AO_SAR_ADC_DIV]  = &axg_saradc_div.hw,
+               [CLKID_AO_SAR_ADC_CLK]  = &axg_saradc_gate.hw,
+       },
+       .num = NR_CLKS,
+};
+
+static const struct meson_aoclk_data axg_aoclkc_data = {
+       .reset_reg      = AO_RTI_GEN_CNTL_REG0,
+       .num_reset      = ARRAY_SIZE(axg_aoclk_reset),
+       .reset          = axg_aoclk_reset,
+       .num_clks       = ARRAY_SIZE(axg_aoclk_regmap),
+       .clks           = axg_aoclk_regmap,
+       .hw_data        = &axg_aoclk_onecell_data,
+};
+
+static const struct of_device_id axg_aoclkc_match_table[] = {
+       {
+               .compatible     = "amlogic,meson-axg-aoclkc",
+               .data           = &axg_aoclkc_data,
+       },
+       { }
+};
+
+static struct platform_driver axg_aoclkc_driver = {
+       .probe          = meson_aoclkc_probe,
+       .driver         = {
+               .name   = "axg-aoclkc",
+               .of_match_table = axg_aoclkc_match_table,
+       },
+};
+
+builtin_platform_driver(axg_aoclkc_driver);
diff --git a/drivers/clk/meson/axg-aoclk.h b/drivers/clk/meson/axg-aoclk.h
new file mode 100644
index 000000000000..396cd3023064
--- /dev/null
+++ b/drivers/clk/meson/axg-aoclk.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstr...@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang....@amlogic.com>
+ */
+
+#ifndef __AXG_AOCLKC_H
+#define __AXG_AOCLKC_H
+
+#include "meson-aoclk.h"
+
+#define NR_CLKS        11
+/* AO Configuration Clock registers offsets
+ * Register offsets from the data sheet must be multiplied by 4.
+ */
+#define AO_RTI_PWR_CNTL_REG1   0x0C
+#define AO_RTI_PWR_CNTL_REG0   0x10
+#define AO_RTI_GEN_CNTL_REG0   0x40
+#define AO_OSCIN_CNTL          0x58
+#define AO_CRT_CLK_CNTL1       0x68
+#define AO_SAR_CLK             0x90
+#define AO_RTC_ALT_CLK_CNTL0   0x94
+#define AO_RTC_ALT_CLK_CNTL1   0x98
+
+#include <dt-bindings/clock/axg-aoclkc.h>
+#include <dt-bindings/reset/axg-aoclkc.h>
+
+#endif /* __AXG_AOCLKC_H */
-- 
2.15.1

Reply via email to