On Fri, Mar 30, 2018 at 09:47:45AM +0200, Boris Brezillon wrote:
> A new I3C subsystem has been added and a generic description has been
> created to represent the I3C bus and the devices connected on it.
> 
> Document this generic representation.
> 
> Signed-off-by: Boris Brezillon <boris.brezil...@bootlin.com>
> ---
> Changes in v4:
> - Clarify the fact that static address == I3C address and dynamic
>   address == I3C address
> - Use i2c-scl-hz in the example
> 
> Changes in v3:
> - Rename {i2c,i3c}-scl-frequency DT prop into {i2c,i3c}-scl-hz
> - Rework the way we expose the provisional ID and LVR information
> - Rename dynamic-address into assigned-address
> - Enforce the I3C master node name
> 
> Changes in v2:
> - Define how to describe I3C devices in the DT and when it should be
>   used. Note that the parsing of I3C devices is not yet implemented in
>   the framework. Will be added when someone really needs it.
> ---
>  Documentation/devicetree/bindings/i3c/i3c.txt | 140 
> ++++++++++++++++++++++++++
>  1 file changed, 140 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i3c/i3c.txt

Reviewed-by: Rob Herring <r...@kernel.org>

Reply via email to